Search:

Hi,
From what you posted and what I wrote before
Your system agent is high well over 1.2v where 1.15v is a better max
vccio cpu is a little low at 1.12v where 1.15 is a better max although as...

Hi,
Still on haswell-e personally one thing is for sure
Auto sure does whack both way over any need for sure vccio cpu over 1.2v same for vcssa just by increasing memory frequency !! :/
Lots of...

Hi,
Where might that be located at exactly ?

Hi,
XMP usually works so yes 1503 should be okay use it

Manual timings and voltage is pretty easy though
Your default timings are 14-14-14-34 and T2 at 1.35v on each dimm side listing boom done...

Hi,
Yep see what device manager shows indeed
Unknown drivers can cause freezes
Sometime ms standard drivers can too if the chipset shows that's what it's using

Default clocks though on...

Hi,
Should be on your asus boards download page along with all other downloads for chipset/....
You've never done all that yet ?

Open device manager in windows I assume 10 and see how many if...

Hi,
Indeed go back to 1503
1703 is not good at all memory wise not sure 1903 is any better but both are bare minimum for 99..x series chips where something is simply wrong/ wrong/ wrong with...

Hi,
No problem
It is a pest no doubt :)

Hi,
It's creation was a way for novice to update bios not all drivers
Obviously chipset... is an easy update to do manually.
Best to download which ever driver in advance and extract it and point...

Hi,
You of all people should know asus does not monitor this forum :p

I smell an rma.

Hi,
Remove Intel Turbo Boost 3.0...
Here's a proper way to disable the application (with device driver intact).
1. RIght-click on the tray icon, and select disable
2. Open Task Scheduler and all...

Hi,
Cripes just get a fan controller :)

Hi,
x99 needed a Intel micro code fix that other older ones killed broadwell-e oc'ing issues
I don't have broadwell-e so I don't know if it actually fixed that or not I'm on hasswell-e still and...

Hi,
Try clearing cmos look in your manual
Usually a couple jumper to make contact for 10.. seconds to clear any bad settings.

Hi,
Use the boot menu to boot to the ssd and the hdd will just be another drive connected
Do with it what you want at that point.

To get files off of it you'll likely have to take ownership of...

Hi,
With the long vrm heat sink all it needs is the cases stand off to straighten the top of the board look down the top of the board see if it's straight
Pressure would push the board back the...

Him
So far anything is better than 1704
9940x didn't like it and I had to do memory timing tweaks to run default ram speed
Still using the tweaks and 1902 seems fine.
Sure have not seen any...

Hi,
I don't have this board but my 9940x hated 1704 bios
Lots of memory quirks

1902 seems to be working okay but I already have adjusted timings and still use them instead of either manually...

Hi,
Just manually install chipset... drivers.

If you use easy update to do bios updates download the bios first and point easy update to it
Rename it accordingly for your mother board first.

Hi,
Not sure why you'd want it
As said rgb stuff is uncontrollable but maybe that is the support you're wanting doubt that will ever happen seeing yes x99 is eol
It just got another Beta bios...

Hi,
Doesn't work get error this does not match rom installed can only refresh bios which is current 1704 wanted to try 1401/ 1503 guess that is out stuck on 1704 ilk.
DVD failed to so not sure what...

Hi,
Oddly that is not in the paper manual or web manual either :)
Thanks a tone :cool:

I'm not a robot just to post is crazy :/

Hi,
There is no naming for bios flash back for x299 tuf mark 2 to rename the .cap file to and thus can not roll back bios

My prime deluxe has a posted message to rename for bios flash back and...

Hi,
Sure would be nice if a tutorial was made :)

Hi,
Most people didn't do a z390 board yet but did do 8700k/ z270 some from silicon lottery and did it again for 9900k
These people may not realize it but they could of bought for the same money a...