Search:

:
Who told you that :mad: cause here's my one hundredth time stamp for "ACCESS DENIAL"
Access Denied

timestamp: 2019-07-01 10:53:09
event ID: 1135950231649268773910918305311897569673...

QCODE 00 is a hardware error and not necessarily a CPU error. It has also been found to be due to DIMMs training/failing or poor cabling conditions. In fact I have seen many posts determining it to...

Yes those temperatures are abnormally high. Always best to list your full system specs with these type of issues.

First ensure the H100i pump is indeed operational and the heat sink brackets are...

I'm now marking all threads where Access Denial comes up with the following. "Unable to respond due to ACCESS DENIAL".
It seems to be due to certain characters or by the size of the post, not sure...

Unable to respond due to ACCESS DENIAL.

There is a Forum bug denying access to some threads, Why this is happening, well we don,t know and it's been happening for a while.
I tried to respond with information for you without success. There...

unable to address your issue due to access denial

Hi joseleg :)

Qcode 00 is not documented and generally considered to be a hardware fault found error, and difficult to diagnose the hardware culprit, however:

Quote/ I test outside the case...

When you hit the Power button to turn on the system, It goes through Post (Power on self test) where your hardware components are interrogated. Once all is OK then it boots to your OS. As your yellow...

Whatever it is, It's a bug and needs to be fixed. It seems random for some and not reproduced with links.
Its been a week and nobody in admin or the Web master has done anything. What's going on...

Whatever it is, It's a bug and needs to be fixed. It seems random for some and not reproduced with links.
Its been a week and nobody in admin or the Web master has done anything. What's going on...

Your not the only one with Bios issues, many regarding USB Flashback via IO rear panel.
Would you believe i'm still on 0804 original and as i'm having no issues i'm not going to touch it.
My system...

I've been denied access in response to a thread I wish to contribute to. Other threads I've responded to are no problem.
The denial notice asked me to contact admin with details of the notice...

Hi lorenkos :) Can you access your Bios?
If so have you tried updating Bios from within Bios using the EZ Flash 3 utility and not as you have done via the rear IO panel.

You are attempting to exceed your RAMs rated frequency and this is never guaranteed. Although not all 2700X CPUs can reach a 4.2GHz Overclock, many can with the correct cooling and 70C with Vcore at...

Thanks for bringing me up to date on the issue dandan. It certainly is an annoying issue for those experiencing it.

Strange how some have issue with the chip and others don't. I agree the chip is...

HI dandan and sorry to hear your problem :(

First I've heard of the IO chip being unstable. (Please link your source) I have this MB and no problems or crashes of this kind.
Regarding AIsuite...

YES as per MB specs
1 x M.2 Socket 3, with M Key, type 2242/2260/2280 storage devices support (SATA & PCIE 3.0 x 2 mode)*4
1 x M.2 Socket 3, with M key, type 2242/2260/2280 storage devices support...

As you quoted me I felt compelled to answer re your Opinion.

First I disagree with your suggestion to RMA the MB unless definitive evidence of failure is found. (A profound inconvenience,...

Well NO!! :( Why RMA the MB if the system now works and is stable?
Obviously your updating and re-flashing Bios has resulted in unacceptable results. You have now done necessary research at...

Well if your DIMMs are all OK and well seated, you cleared CMOS to no avail and tested a 2666MHz 4GB DIMM to test, then it's time to RMA the MB as the only other thing I can think of is the new PSU....

Qcode 8 with the DRAM led lit indicates a problem with RAM. Either you have a mismatch or the MB DRAM slots are dead.
As POST will not advance till DRAM led problem is resolved best is to clear CMOS...

Hi and Welcome to ROG :)

Crosshair VI Hero came out with a less than acceptable Bios (understandable being rushed for the new AM4 platform and had many unsuccessful updates (for some) since...

Well that ofc is a different troubleshoot. I assume you tested both cards in both slots to eliminate the possibility of a dead PCIe slot. If its proven that both cards work in a paticuler slot then...

Hi Honeymunchz :) and Welcome to ROG.

I think it's a little unfair to blame the MB Bios per-say for an issue that appears to be a Corsair software related issue for controlling your RGB lighting....