Search:

Have you played with cpu input voltage and cache voltage? I found running my input voltage at 2v really helped my chip and meant i could stay under 1.375v core (big help to load temps).

Cache...

Hi all , sorry if this is in the wrong area of the forums but i figured the guys around here may have some experience with this.

I have two 980Ti Matrix Platinum's which id like to get into some...

Another update, IT BOOTS!!!!

Ok so was really about to give up and then for some reason I thought - I know ill take the cpu retention bracket off and make sure theres no crud under it - no idea...

Going to resurrect this as I am having a very similar problem with my Rampage V edition 10.

I am having problems only with dim slot B1 and only if above 2800 MHz, the xmp speed for my kit is 3200....

Another Update, whilst gradually pushing for higher clocks with one Dimm in slot B1, when trying 2993 or 3200 Mhz the slot will "turn off", and the system will give code 53 (no memory installed?).
...

Ok so im literally trying every BIOS version one at a time, what I did notice is that the older bios' "auto" setting for memory training clearly has a bias for ON. This makes the board post with the...

Thanks for your help there buddy, ok so I've tried the settings you gave me and im still halting at code bd at 3200Mhz. Which bios are you referring to exactly? This is the Rampage V Edition 10 so...

Still looking at this problem, here is my post quoted from the G.skill forums - No surprise I didn't get any responses:

Hi guys, I wonder if anyone can help, I have the hardware in the topic and I...

Heres my quoted post from the G.Skill Forums if it helps anyone - For what its worth I didn't get any responses there.

Hi guys, I wonder if anyone can help, I have the hardware in the topic and I...

Finally got round to trying this, couldn't get it to work at 3200Mhz.

I keep loosing slot B1 and registering 24GB of memory. I've tried SA voltage, VCCIO Voltage and many other settings.
It is...

I think I'm having the exact same issue with my rampage v edition 10. only now I cant get xmp to work on any bios version after the first flash...

Hey guys sorry for my absanse, in the end I gave up and have been using a rampage v extreme I bought for £10 because it had some bent pins and a corrupt bios chip. (now that's bang for buck!)

I am...

hmm so it seems this card has corrupt power tables?

I've been digging around in nvflash and its saying pp0 does not exist?

the card works fine until I try to raise the powerlimit above 100.
...

Ok so one of the cards randomly booted out of safe mode so I can use it at least. though I'd still like to do flashback on it.

when I open gpu tweak the power target is 0000 and cannot be changed...

Hi guys, i have two 980ti Matrix platinums and i am trying to reset their bios's to factory - I am having issues where the power limit is set to "0000" and is not adjustable.

I am doing this one...

hmm thanks for the suggestion I will give this a go

Hi all Im wondering if anyone can help me sort this out with me.

Ive got a Rampage V edition 10 with a 1680v3 and a quad kit of 32GB 3200CL14 GTZR memory.

When I bench tested the PC on the...

Hmm maybe,

I'm inclined to think that there's a timing somewhere that it doesn't like running that slot in - doesn't matter which stick I put in there its always fails training at xmp.

I...

Ok all, so if anyone still about for help I've narrowed it down a bit more.

I've been testing all my sticks in all slots and I have discovered that slot B1 on this board will get code 53 at 3200...

Yeah that's exactly what I thought vlad! Very powerfull for the price of used now hehe!

Only I'm now having trouble with dim slot b1 disappearing at 3200. So the story continues! I'll try tuning...

Ok so I've sent it back to eBay. Panic over!

Hopefully the next one will work ����

Forgot to say I've had the 5960x out twice now to check fit and pins and seems to be fine.

I put the 5930k back in and system boots right away. Unless anyone can think of anything to try I think...

Hi all,

So I bought a 5960x to replace my 5930k,

With the 5960x in the system I am hanging on Qcode 95 at boot.

I have tried one ram stick to no avail and also resetting CMOS. Also tried...

Hmm think I'm going to give up on this Imc ever doing more than 2666. With good timings im guessing it won't be much different to 3200cl14?

I tried some cache voltage and 125 bclk last night but...

No I did try 1.5 lol. It obviously isn't that!

Indeed I think I map be out of luck with this CPU - only thing I guess I haven't tried yet is 125 bclk. You never know I guess.

At the end of the...