Search:

Type: Posts; User: CharlieH

Page 6 of 11 FirstFirst 3 4 5 6 7 8 9

Search: Search took 0.01 seconds; generated 199164 minute(s) ago.

  1. I am using it, I set extreme for the auto OC, it...

    I am using it, I set extreme for the auto OC, it set XMP and OCed like before, I use VROC for a data drive etc. I have been running it for about a week and haven't seen any issues so far. My chip is...
  2. Replies
    3
    Views
    1,874

    I am running 2.1.17. I had to go to the Device...

    I am running 2.1.17. I had to go to the Device Manager and access the 'Advanced' settings tab for the adapter and disable 'Recv Segment Coalescing (IPv4)'. My issue wasn't printing but it was adapter...
  3. I am not sure your config will work, but if it...

    I am not sure your config will work, but if it does you will be spanning contollers. And I know you cannot boot off spanned controllers, well at least it is not supported. So I don't think your...
  4. BTW the controllers worked this way for me, there...

    BTW the controllers worked this way for me, there are 3, Controller 0 1st HyperX16, Controller 1 2nd HyperX16, Controller2 DIMM Card (I have a single Samsung 960 Pro in that card)
  5. One note I use intel 900p SSDs, 8 of them. Not...

    One note I use intel 900p SSDs, 8 of them. Not sure about the samsungs working maybe with a VROC key?
  6. I run 2 HyperX16s both run at x16 with 4 divided...

    I run 2 HyperX16s both run at x16 with 4 divided x4 lanes. I had to put my GPU in a x8 slot to accomplish this.
  7. One last note the faster you OC the faster your...

    One last note the faster you OC the faster your VROC is.
  8. Replies
    44
    Views
    6,806

    One other note the faster you OC the faster your...

    One other note the faster you OC the faster your VROC is.
  9. Replies
    44
    Views
    6,806

    Given my 10 Gb network and running VMs I get a...

    Given my 10 Gb network and running VMs I get a huge benefit from VROC I run a 8 drive (intel 900Ps) RAID 0 setup and it is totally worth it and very stable no key required. It really depends on your...
  10. I left off the covers but you could prolly use a...

    I left off the covers but you could prolly use a Dremel on the end and attach them and it would look better. I have a 10Gb network and I run multiple VMs so these drives in RAID 0 are worth it for...
  11. I don't have pics but I use this case:...

    I don't have pics but I use this case:
    Thermaltake Tower 900 Black Tempered Glass Fully Modular E-ATX Vertical Super Tower Chassis CA-1H1-00F1WN-00

    And I use the u.2 to m.2 extension cables that...
  12. I have 2 working with 8 intel drives in RAID 0...

    I have 2 working with 8 intel drives in RAID 0 fine
  13. Me too. This is my third upgrade of the driver...

    Me too. This is my third upgrade of the driver always just installed over the top.
  14. Aquantia 10Gbe fix by disabling one advanced setting on the chip thru device manager!

    I was having issues with copying files down to my pc and with Hyper-V client internet downloads basically the speeds were close to 0.

    I disabled the "Recv Segment Coalescing (IPv4)" and problem...
  15. See the other thread we are in on the 10Gb port...

    See the other thread we are in on the 10Gb port for more details but yes I get 10Gb speeds no problems.
  16. I use the Netgear XS712T. I definitely have fast...

    I use the Netgear XS712T. I definitely have fast enough storage to get the 10Gb speeds. I copy between RAID 0 NVMe drives on separate boxes. Most my boxes have 2 NVMes but this one has 8x Intel 900ps...
  17. I did update my driver from the aqc site directly...

    I did update my driver from the aqc site directly to the latest driver. My network is a 10g network/switch and I do not seem to have any issues. I have 1Gb AT&T fibre internet and run tests thru that...
  18. I like my MB. I use the 10 GBe port fine on a...

    I like my MB. I use the 10 GBe port fine on a 10GBe network. I OC my board but I do have it under water. The biggest gripes I had were early on there were many issues but they have been cleared up...
  19. I went to the Aquantia site and downloaded the...

    I went to the Aquantia site and downloaded the AQC107 driver, just updated the driver thru the device manager and now my network card works way better, with the cumulative update to 1803 my internet...
  20. Then maybe its because I use VROC but like I said...

    Then maybe its because I use VROC but like I said I have a 8 drive RAID 0 array using the IRSTe driver on the x299 platform.
  21. What about the IRSTE that's what I am using and...

    What about the IRSTE that's what I am using and it use to work with AHCI.
  22. My only issue was with the 10G driver. I had to...

    My only issue was with the 10G driver. I had to add a entry in the host file to get to this computer now on the network. I repaired the driver and it fixed the VMs running a VPN on that host to work...
  23. I have 8 drives but I use the following: RAID 0...

    I have 8 drives but I use the following:
    RAID 0
    VROC
    2x HyperV x16 cards
    8x Intel 900ps
  24. Couple of other comments. I don't think you...

    Couple of other comments. I don't think you should boot your OS from spanned controllers if that is the case. You would be better of buying a Hyper x16 card even if you only use 2 drives. If you...
  25. Check your IRSTe when u have windows installed on...

    Check your IRSTe when u have windows installed on a different drive, I have to wonder if it is spanning controllers, that is you have two different controllers one for each drive. When I did this I...
Results 126 to 150 of 257
Page 6 of 11 FirstFirst 3 4 5 6 7 8 9