Search:

Type: Posts; User: CharlieH

Page 9 of 11 FirstFirst 6 7 8 9 10 11

Search: Search took 0.01 seconds; generated 259963 minute(s) ago.

  1. You do not turn on VMD in the IRSTe software...

    You do not turn on VMD in the IRSTe software there are three VMD controllers in the CPU which show up as devices in Device manager and show up in the IRSTe software, each drive is assigned to one...
  2. Oh and you cannot boot RAID volumes that span...

    Oh and you cannot boot RAID volumes that span VMDs.
  3. Really super interesting when I turned on span...

    Really super interesting when I turned on span VMDs all the sudden every RAID 0, 1, 5, and 10 were available and the Samsung 960 Pro no longer showed up as grey and not supported, it showed up with...
  4. 7drives everything else the same as the last...

    7drives everything else the same as the last tests:
    68845
  5. Right but if it is set to CPU above that setting...

    Right but if it is set to CPU above that setting you will see the drive show up in IRSTe on the VMD controller and you can create a RAID 0 and that is VROC.
  6. Oh you can also set it to x8 there too, if you...

    Oh you can also set it to x8 there too, if you are doing RAID with two NVMes to get the best bandwidth/throughput I recommend setting it to x8.
  7. Setting DIMM.2 to CPU which it is by default in...

    Setting DIMM.2 to CPU which it is by default in the advanced->onboard devices section = VROC, when in RAID. You can set it to PCH there too. That is where you control it.
  8. So the last 2 weeks have been pretty crazy with 3...

    So the last 2 weeks have been pretty crazy with 3 tech upgrades, the Xbox One X, the iPhone X, and this rig. The Xbox One X upgrade went the best but MS was 2 days late with the delivery due to...
  9. I noticed in some threads folks are mentioning...

    I noticed in some threads folks are mentioning they cannot see their drives sometimes when loading the VROC driver during the Windows install. I think I mentioned this in a previous post in this...
  10. So I am using the Intel 900ps with the included...

    So I am using the Intel 900ps with the included Intel m.2 adapter. I have 2x Hyper m.2 x16 cards 4 slots each which gives me 8 drives. I have four in there now. I have another Intel 900p I got today...
  11. "PCH-based RAID arrays are bottlenecked by the...

    "PCH-based RAID arrays are bottlenecked by the 32Gbps limit of the DMI bus", straight from the MB marketing page talking about using VROC with the Hyper M.2 x16 card.
  12. One thing to note you will have to use PCH for...

    One thing to note you will have to use PCH for your RAID 0 if you do not use Intel drives.
  13. All that should work if you have a 44 lane CPU.

    All that should work if you have a 44 lane CPU.
  14. Depends on your CPU. You get a certain number of...

    Depends on your CPU. You get a certain number of PCIe lanes depending on your CPU. If you get 44 lanes, that's the most, then you can do x16/x16/x0/x8 and the DIMM.2 at x4. That's 44 lanes. So you...
  15. So installed Win 10 Pro via DIMM.2 PCH no VROC...

    So installed Win 10 Pro via DIMM.2 PCH no VROC enabled Hyper-V works fine. The second I enable VROC on a Hyper M.2 Card and then install IRSTe can't get past the spinning circle at boot up without...
  16. OK Hyper-V is still a problem. With no OC still I...

    OK Hyper-V is still a problem. With no OC still I finally rebooted for the first time I got in to Windows with Hyper-V enabled. I thought enabling CSM was the trick. Well not a total fix. It changed...
  17. Here is the IRSTe, notice it just warns about the...

    Here is the IRSTe, notice it just warns about the Samsung 960 Pro SSD, and notice the RAID 0 Array is bootable:
    68692

    Here is Disk Management:
    68693

    After looking more closely at Disk Mgmt I...
  18. Whew got the Hyper-V to work. Final Summary of...

    Whew got the Hyper-V to work.

    Final Summary of where I landed with the Intel 900ps:

    1) They are bootable VROC RAID 0
    2) I did all 4 in RAID 0 with the IRSTe application, I took default...
  19. I cannot get Hyper-V/Intel Virtualization...

    I cannot get Hyper-V/Intel Virtualization technology to work, that's a nail in the coffin for me. I filed a bug with ASUS but w/o that I might as well as return everything I can't use this rig w/o...
  20. 4 drives: 68673

    4 drives:
    68673
  21. Another interesting thing to note my Windows boot...

    Another interesting thing to note my Windows boot and shutdown process seem to take significantly longer using VROC (Not sure if it is just using VROC or VROC with the Intel 900ps because I haven't...
  22. No VROC key needed, no issue with the software...

    No VROC key needed, no issue with the software being in trial mode.

    The only issue is the BIOS will not Create a RAID 0 on these drives. But you can do that with the IRSTe software and then the...
  23. Same as before but 32 Queue depth 68669

    Same as before but 32 Queue depth
    68669
  24. Here are the results of the 3 Intel 900p SSDs in...

    Here are the results of the 3 Intel 900p SSDs in VROC RAID 0, with queue depth 4, Intel 7980XE OC CPU @ 4.0 GHz and 128 GB of Memory @ 2666MHz:
    68668
  25. dup.

    dup.
Results 201 to 225 of 257
Page 9 of 11 FirstFirst 6 7 8 9 10 11