Search:

Type: Posts; User: geneo

Page 1 of 20 1 2 3 4

Search: Search took 2.27 seconds; generated 6 minute(s) ago.

  1. These are often bleeding edge drivers, meaning ...

    These are often bleeding edge drivers, meaning not officially released by the manufacturer yet or tested by motherboard vendors. I would say greater than 95% of the time you really don't need nor...
  2. What happens? Try a different USB stick? There...

    What happens? Try a different USB stick? There have been reports of some USB compatibility issues I have seen in the past.
  3. Windows IME driver doesn't matter with flashback....

    Windows IME driver doesn't matter with flashback. BIOS flashback doesn't use the current BIOS or Windows at all. It is a small independent firmware program that understands FAT32 USB and how to...
  4. Spoke too soon on microcode E0. At same settings...

    Spoke too soon on microcode E0. At same settings as CA, it wasn't stable with prime95 1344/1344 in-place AVX. Back to CA on 2004, which is still stable.

    Was hoping E0 fared better than E2 - E0 is...
  5. Haven't had any issue going from 2002 to 2004....

    Haven't had any issue going from 2002 to 2004. But I have a modded BIOS though: on 2002 I used microcode CA and on 2004 I am using microcode E0. Both 2002 and 2004 from Asus use E2, for which I...
  6. Replies
    51
    Views
    15,347

    I am aware of all of that. It was in jest.

    I am aware of all of that. It was in jest.
  7. Replies
    51
    Views
    15,347

    The statement "This system may be vulnerable" is ...

    The statement "This system may be vulnerable" is of course, always true (especially with the ongoing slew of vulnerabilities being uncovered). ;)

    I think that it is unlikely these will be...
  8. Replies
    51
    Views
    15,347

    Update went smooth. Will run some tests. Thanks...

    Update went smooth. Will run some tests. Thanks again.

    It looks like the CSME version detection tool needs updating!

    87762
  9. Replies
    51
    Views
    15,347

    I am running firmware 14.1.51.1528, which is very...

    I am running firmware 14.1.51.1528, which is very recent, yet the latest (December) CSME version detection tool says I *may* be vulnerable. I assume this is just the tool not knowing about this...
  10. Did you try bios flashback?

    Did you try bios flashback?
  11. Why not use MSI afterburner then? It seems to...

    Why not use MSI afterburner then? It seems to work fine.
  12. Replies
    6
    Views
    341

    They have lots and lots I'm one ;)

    They have lots and lots I'm one ;)
  13. Sticky: I have the same issue.

    I have the same issue.
  14. Thread: Asus Z490 stuff

    by geneo
    Replies
    539
    Views
    80,219

    How about starting a "Z490 Stuff" over there?

    How about starting a "Z490 Stuff" over there?
  15. Thread: Asus Z490 stuff

    by geneo
    Replies
    539
    Views
    80,219

    $500 for the Hero XIII. what.

    $500 for the Hero XIII. what.
  16. Replies
    7
    Views
    143

    Well I'm not sure. The motherboard may complain...

    Well I'm not sure. The motherboard may complain about no CPU fan when it boots. In principle it shouldn't, but I bet it does. Best thing IMP is to use a fan hub connected to the CPU fan header and...
  17. Thread: Asus Z490 stuff

    by geneo
    Replies
    539
    Views
    80,219

    we've been demoted. It should have been a new...

    we've been demoted. It should have been a new forum z590/Z490 motherboards, but I guess it reflects that Asus doesn't care much about supporting the last generation motherboards anymore.
  18. Replies
    7
    Views
    143

    there is no AIO fan header. There is an AIO pump...

    there is no AIO fan header. There is an AIO pump header that is meant to be 100%. Can't tell you about the corsair stuff. I have the EK fans connected to a fan hub on my motherboard, and that...
  19. Replies
    7
    Views
    143

    No they are 3-pin, Yiu can see in this diagram...

    No they are 3-pin, Yiu can see in this diagram the ports labeled 12 are 3 pin Gene2, and they are 5v


    87630

    87631
  20. Replies
    7
    Views
    143

    I have the Hero plus the EK. It needs A-RGB...

    I have the Hero plus the EK.

    It needs A-RGB headers (3 pin). The Hero has 2, one on top right of board, and one on bottom left. You can daisy-chain them on the EK-AIO so you only need one...
  21. If you do "View-> devices by type" you should...

    If you do "View-> devices by type" you should see a Large memory section you have the BIOS BAR set to auto. I don't think there is a Video BIOS/driver available from NVIDIA yet AFAIK.
  22. Hmm. I downloaded on the 16th. Asus, being the...

    Hmm. I downloaded on the 16th. Asus, being the reputable company they are, should have noted if they switched the file. LOL.

    If someone has one posted on the 13th and the one on the 15th it would...
  23. I think the lighting service needs to run for the...

    I think the lighting service needs to run for the more complicated effects - the Aura chip seems to be pretty primitive. I believe that is why it is using CPU - to coordinate the effect.
  24. What does that mean "when I pointed to the BIOS...

    What does that mean "when I pointed to the BIOS the response was"?

    It definitely is UEFI - I am running it with no issues, modded for microcode and updated RST UEFI module, secure boot, etc....
  25. If you run anything but static color, it will do...

    If you run anything but static color, it will do that.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4