Search:

I don't see anything wrong at all. My cases HDD led is constantly flashing as well. Logically speaking, if the led wasn't flashing then I would be concerned.

In my opinion I would stick to Crosshair series. While Strix is also a good choice, I just think that the other series have more to offer. A processor to choose now? It depends on how you look at it....

Did you set Primary Display to PEG in the Graphics Configuration menu?

Ram frequency @ 3600MHz is attained by overclocking. You can choose that speed in the memory frequency sub-menu in the Ai Tweaker menu but I doubt you'll have a stable system. Try testing out the...

Ok. First try connecting your monitor with the display port cable that is 1 metre in length and 1.4 specification. I figured that your case is far away but you will need to test it this way to find...

Did you plug in the 8-pin & 4-pin power connectors on the motherboard?

Looks like a very good build to me. Keep in mind that running an SLI setup on this motherboard, the PCIe operating mode will be x8 and installed in slots 2 & 3.

Well, the board supports up to 128GB of ram. If you're looking to occupy all of the slots then you can stick to kits with 2x32GB. Keep in mind if you decide to overclock the maximum ram capacity on...

I thought I need more space but this computer is going to be one gigantic storage :cool:

Just for the record, my kits displayed in my profile run 128GB @ 2666MHz just great with 1950X till this day. It won't post with any other higher frequency though.

Try plugging in the Acer in the first display port of the first card and see if the screen appears and loads into Windows. Later on plug the 2nd monitor to the same card and you will have to adjust...

You're right. When I was building my computer there was very limited information on various kits available on the market for ZE. I decided to take a risk with Goodram, a Polish company. I overclocked...