Search:

Type: Posts; User: LawShadow

Search: Search took 0.00 seconds.

  1. Replies
    1
    Views
    394

    Asus ROG Swift PG32UQ help and advise

    Hi all,

    I might purchase the Asus ROG Swift PG32UQ monitor, will use it for gaming ie rpg's, racing and ARMA 3 and other games that do not need blistering speed ie extreme low input. Is it good ie...
  2. Replies
    2
    Views
    2,527

    No one?

    No one?
  3. Replies
    2
    Views
    2,527

    Ok... So i went into the BIOS disabled AMD...

    Ok...

    So i went into the BIOS disabled AMD turbo core. Must i use "Offset" or "Manual"?
    Proceed to CPU voltage current @ 1.512v so i tried to lower it to 1.400v is it 1.512 - 1.400 = 0.112?
    Is...
  4. Replies
    2
    Views
    2,527

    Help with undervolting FX-9590

    Hi all,

    So it's summer and i live in a house that has no AC and is old wooden floor and its around ambient 32c spiked at 35c outside so cant tell what it is inside my room. And it only going to...
  5. Replies
    3
    Views
    3,447

    Ok.... I think i solved the issue, so maybe...

    Ok....

    I think i solved the issue, so maybe people in the future can see this IF they have the same problem like i did.

    What i have done included the above trial and error is as follows:

    I...
  6. Replies
    3
    Views
    3,447

    Thanks for the reply, Well im also using Linux...

    Thanks for the reply,

    Well im also using Linux Ubuntu 12.04 and it happens on that OS as well ie booting into ubuntu desktop then it reboots after that i can use my pc without further issues BUt...
  7. Replies
    3
    Views
    3,447

    Asus Sabertooth 990FX R2.0 boots twice....

    Hi all,

    Maybe one of you guys can help me out here are my specs: (its a new build btw)

    Asus Sabertooth 990FX R2.0 MB (latest bios)
    AMD FX-9590 CPU
    Corsair TX850 PSU
    XFX R7 250 Core Edition...
  8. Any one used the fx-9370 on the Sabertooth 990FX...

    Any one used the fx-9370 on the Sabertooth 990FX R2.0? If so what are the temps on the vrm?
    What about power consumption? I know about idle and load consumption (idle approx 75watt - load approx...
  9. Thank you for the information much appreciated. ...

    Thank you for the information much appreciated.

    One last question before i make the order:

    Power concumption at idle is good for this type of cpu ranging from 65 to 78watts, at load it can...
  10. Thanks for your reply it did clear some initial...

    Thanks for your reply it did clear some initial concerns,

    Could you provide info what hardware you used specifically the cpu and what did you watercool...cpu only?
    So it seems that adding two...
  11. My initial thought was only watercooling the...

    My initial thought was only watercooling the cpu...mind you like i said previously im not planning to overclock the fx-9370 ie leave it at stock speed 4.4ghz and 4.7ghz with turbo is plenty enough. I...
  12. Well i skimped through threads even with the...

    Well i skimped through threads even with the fx-8350 you need adequate cooling for your vrm's since one is not using a air cooler for the cpu but a waterblock...most air coolers are designed to add...
  13. Crosshair V Formula Z + FX-9370 and VRM cooling advice....

    Hi all,

    Firstly my specs ( i already have most hardware only the cpu and MB + cooling do i need to purchase).

    Lian Li PC-A05NB case
    Corsair TX850 watt psu (used 1 day lol practically as new)...
Results 1 to 13 of 13