Search:

Type: Posts; User: Silent Scone@ROG

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    2
    Views
    267

    According to AMD the feature is set to debut in...

    According to AMD the feature is set to debut in AGESA revision 1180.
  2. Hello, I would first double-check that the cooler...

    Hello, I would first double-check that the cooler is correctly seated with even mounting pressure and that the pump is running. HWinfo should display speed via the attached header.
  3. Replies
    159
    Views
    13,834

    Switched from 3950 to 5950X here on the CH8 and...

    Switched from 3950 to 5950X here on the CH8 and not experienced those problems. You may want to reinstall Armory Crate, also make sure the system is stable. Memory instability can cause the lighting...
  4. First-generation was certainly not without its...

    First-generation was certainly not without its problems, however, Zen has matured to a point where a seasoned enthusiast should have no trouble navigating any platform-related quirks quickly if any...
  5. You are confusing another feature entirely. Smart...

    You are confusing another feature entirely. Smart Access Memory has absolutely nothing to do with the Dynamic OC Switching on the Dark Hero.
  6. Hello, The best method is to use either the...

    Hello,

    The best method is to use either the Water Out or Water In temp headers to install a 10K Ohm sensor to monitor coolant temp. That way, via Q-FAN configuration in the UEFI you can adjust...
  7. Replies
    159
    Views
    13,834

    07 is likely memory timings. May want to work on...

    07 is likely memory timings. May want to work on secondaries, or increase CAS one clock. May also need to increase SOC voltage.
  8. Replies
    3
    Views
    1,842

    PM with your preferred username.

    PM with your preferred username.
  9. Thread moved to the correct section. Those...

    Thread moved to the correct section.

    Those temps don't seem excessive. Might want to check mounting pressure if anything. I see 85c with custom cooling in CR20 with 5950X simply by enabling PBO. ...
  10. Hello, I'm not sure I understand the question...

    Hello,

    I'm not sure I understand the question if there was one. The CH8 Hero is not a new board. If changes are required in order to facilitate new features, this is something that cannot be...
  11. Replies
    2
    Views
    63

    Hello, please let me know the username you...

    Hello,

    please let me know the username you would prefer and I'll get this changed for you.
  12. Hello, I've tested the portal feature in the...

    Hello,

    I've tested the portal feature in the link I provided and it appears to be working for myself so it's unclear why it was not working for you.

    In your case I manually added the photo for...
  13. Hello, the dynamic OC feature required PCB...

    Hello, the dynamic OC feature required PCB changes and will unfortunately not be finding its way to older boards.
  14. Replies
    159
    Views
    13,834

    Yes, use Karhu or Google Stress App Test....

    Yes, use Karhu or Google Stress App Test. Memtest86 is redundant.
  15. Hello, You can change your avatar from the...

    Hello,

    You can change your avatar from the ASUS Portal. https://account.asus.com/info.aspx
  16. Replies
    159
    Views
    13,834

    Is the memory stable? How are you testing it?

    Is the memory stable? How are you testing it?
  17. Replies
    159
    Views
    13,834

    86811

    86811
  18. Replies
    159
    Views
    13,834

    Hello, Shamino is one of our top engineers, so...

    Hello,

    Shamino is one of our top engineers, so you're getting this straight from the horses mouth.
  19. I would try doing some alternative benchmarks for...

    I would try doing some alternative benchmarks for comparison with other users to see where that stacks up. Also, it's possible if the score is dropping with FCLK and memory frequency that there is...
  20. 5000 series chips with the right memory modules...

    5000 series chips with the right memory modules should be able to hit 1900FCLK and possibly higher. You may need to try as much as 1.15v VSOC depending on the CPU sample.


    Have not experienced...
  21. Hello, This is unfortunately what is refered...

    Hello,

    This is unfortunately what is refered to as a how long is a piece of string question. It really depends on the title in question as SLI is currently being phased out by NVIDIA, and support...
  22. Replies
    4
    Views
    271

    Hello, This prompt can often happen unprompted...

    Hello,

    This prompt can often happen unprompted due to system instability. If it persists, you may want to either revert to stock or test both CPU and memory stability independantly.
  23. Best results are obviously still found with a...

    Best results are obviously still found with a ratio of 1:1 for FCLK. Many CPUs will not be able to run 3800MHz at 1:1. Moreover, those modules might not be able to do CAS 14 on that platform at that...
  24. Hello, I've no problems on this UEFI or...

    Hello,

    I've no problems on this UEFI or previous builds with my personal setup. Have just flashed to 2311 and reinstated previous memory settings.
  25. Hello, can I ask why you're using a positive...

    Hello, can I ask why you're using a positive offset?

    If setting the desired value in Additional Turbo Voltage is above the minimum VID, there is no need to apply an offset as this is not true...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4