Search:

yes takes some tiome

this bios should give you max performance even on balanced power plan:
https://www.dropbox.com/s/cvc0fuedoho02gt/ROG-MAXIMUS-XIII-HERO-ASUS-0015.rar?dl=0

for this issue? not so quickly unless you just want a test version

thank you , will be updated in newer bioses

if you would be so kind, just a last confirmation, run "justthis.exe" , just reads back and writes the exact same values to see if that is all that is needed:...

Awesome, thank you very much

sorry i disabled ringdownbin in that, try this
https://www.dropbox.com/s/zohq1tbwsxug29n/runnthis.rar?dl=0
runthis
if it works i need your help to test another version that splits up the tasks and...

Try manually setting skew control/rtt park channel A and B to 48

try running this,
https://www.dropbox.com/s/1vr193c9zbrfpay/runthis.rar?dl=0
it will "max out all limits" again
see if it helps.

single rank or dual rank and 2 sticks?

no it isnt

please try this and let me know if it solves
https://www.dropbox.com/s/epxurefopkr62dj/ROG-MAXIMUS-XIII-HERO-ASUS-0013.rar?dl=0

please try this and let me know if it solves
https://www.dropbox.com/s/0eyrh9dct4p17u2/ROG-STRIX-Z590-E-GAMING-WIFI-ASUS-0013.rar?dl=0

report MCE status in bios here

can u try this bios to see if the whine is still there?
https://www.dropbox.com/s/eknkwm150igpp8u/ROG-MAXIMUS-XIII-HERO-ASUS-0037.rar?dl=0

thi sis being looked into and will be resolved soon

the most direct way is to enter v/f point offset menu,
start with -0.05v for the high frequency points vfpt8/7/6/5

it is not a bug
it is intentional at 3600 with gear 1 which is auto
my co worker says its needed for the non-ks to stabilize at this frequency with gear 1
i am trying to convince him to branch...

setting adaptive to 1.4v does nothing if it is a value lower than the native vid
you can read up:
https://rog.asus.com/forum/showthread.php?106375-MCE-explanations-and-others
as for native vid...

that is soooo misunderstood, ai opt never sets any vcore higher than 1.55v
its your cpu's native vid that is high
open up turbov core check the actual set adaptive voltage
and how has mce been...

it sounds like pin connection issue, reseat the cpu in the socket

it all depends on how well tuned your pbo is.
if u just enable pbo a single ccd chip would have its oc freq cross its pbo freq at the 45A region. a 2ccd ~ 55A
if u tweak your pbo with CO etc, you...

hasnt worked as you woulda hoped for a while now,
the data bus is shared with the two dimms in the channel, and even though the option ignores the other dimm, with that other dram not initialized,...

hi this version of driver fixes the aida collision
https://www.dropbox.com/s/x95o93fxwcsqx5c/kerneld.rar?dl=0
replace the original in the aida folder with this

i tihink its inside pci subsystems maybe