Search:

For 6pin, GND and 12v are "inverted", Asus has planned which original PSU cable to "connect" this 6pin ?

As always, it really depends on CPU and cooling

Seen a 10980xe on a forum, at 1.20v and 4800mhz, the hottest core is at 75° under Cinebench 15
80° with Realbench

Ok thanks

I asked because I hesitate to take the 10980XE (but would heat more than the 7980XE delided, no Adaptive Mode, etc ...) but I wanted to change :D

Yes that's it, this is the one I was talking about
So only available for OEMs

Thanks

And no news for futur HEDT I guess ?

Weird, I saw using the 3 cables (2 8pin and 1 6pin) and no worries
It even seems that VRMs heat up a little less

Indeed, from the information I had seen, Intel should have "redone" the HCC die (or something like that)
So nothing to expect from Intel for the 2066 I also think
Surely a fake screens with a 22...

Hello

Information was passed on a CL-X 22 cores (and maybe more)
Any news about this ?

And the next gen, Icelake-X I believe, which seemed to be planned for the end of 2020, will probably be...

Ok, 68 is for Asus prediction, I thought it was the temperature for CB r20 :D
Indeed, 90° is really hot

Ok, thanks ;)

Thanks for your feedback ;)

I hesitate to take a 10980XE, but this story of Additive Mode slows me down a bit

Are you at 68° on the hottest core with Cinebench (4800mhz) ?

With Cascade Lake-X, did you manage to use Adaptive Mode (but with a higher value) ?

Really a shame that it does not work, you also use the manual Vcore (fixed) ?

Hello

No one has managed to use Adaptive Mode with a Cascade Lake-X ?
It would seem that it was very complicated, because of the table of VID too high with this CL-X

Thanks

With W10 1909 and 2004 and bios 3006, no ITB service and no ITB device in device manager ;)
Present with bios 2004

No problem with 3006 and 7980XE with OC @4.6 (and R6E)
Adaptive Mode and C-States on AUTO

In fact, same setting as with the 2002

About the ROG heatsink (Omega and Encore), someone to test the ROG heatsink and those of EKWB ?
Same result, or one is better than the other ?

Thanks

You're welcome ;)

The modules, microcodes listed on the 1st page are up to date
It's me who makes the modifications on the bios, but it's not my job, just a geek :p ;)

I also stay with the 49 (7980XE) :D
5E microcode for Windows 2004

Hello

No admin or webmaster passing on the forum to add this option ?

Hello

Addition of the bios Encore 0603
And addition of the new 6901 microcode for Skylake-X (I have not tested)

Ok thanks for your feedback ;)
For that I tested with the last CSME (end of March)

After, I am not up to date for the microcode, so I can leave 11.12 :D

I tested and it is not good with the R6E and 7980XE

84455 84456

To see with an Omega or Encore, etc ...
Return to 11.11 if possible :)

Thanks restsugavan ;)

All it's ok for you with the 7980XE ?

Hello

New ME firmware 11.12.77.1664

Changelog :
- Security update.
- Resolved a TLS provisioning issue resulting in a yellow bang on the Management Engine Interface device in the Device...