Search:

Intel Turbo Boost has been removed (since 3006), that must be why you no longer have it ;)

I did not understand, there :confused:

No it's not my work ;)

AVX512 would bug from 4200mhz with microcode 49
Not using any apps taking advantage of the AVX512, I have no need to set a higher frequency

And I use 3006 (MC49) with my...

I can't help you, I always use microcode 49

It's weird, if the TJMax hasn't changed, then the temperatures should be the same (under the same conditions)
Maybe another setting or wait for the opinion of other owners of Cascade Lake-X

Ok, you went from the official 3006 to the modded 3006
Either from 12C microcode to F00

You will have to retest the official 3006, see if the TJMax is the same (normally yes) and if you still...

What bios did you have before ?
The TJMax has not changed ?

Did someone test to enable or disable the SpeedShift option to see what it changed ?

Some tips to disable it, and some to enable it :D

The original 3006 bios has an old microcode for Cascade Lake-X
For your problem, I don't know, I don't have a Cascade Lake-X

Microcode 69 is for Skylake-X, as indicated on the link ;)

You're welcome ;)

I checked and no worries on this bios
Try to download it and install it again

Done ;)

Hello

Microcode 69 ?

Compared to which bios ?
It should be the same as with the official 2002 bios

Ok, thanks so much ;)

Hello

On this motherboard, with D-RGB, it's possible to have only one color (solid color) I suppose?
I don't know, compared to classic RGB

Thanks

Done ;)

I don't care about all that :p
I do not do "the hunt" at temperatures (watercooling, etc ...) to have a microcode that heats up more

If you have trouble understanding this, I can't help you
Pass...

I'm doing this to you tomorrow for the 49 ;)

No problem using it with a CPU 7000 (just that it is not up to date for the latest vulnerabilities, but these vulnerabilities have been around for more...

And yet the temperatures in idle are increased
And this is normal, the temperature of the cores is "read" over the distance from the TJmax (for DTS probes)
I thought everyone knew it

TJmax 105°...

The CPU 7000 had a TJmax of 105°, when Intel released the 9000 with a TJMax of 110°, microcodes went to 110° for CPU 7000 and 9000 (same architecture)
Before the 9000, the 7000 worked very well...

compare secondary and tertiary timings between the 2 bios
The changes should be there

I use the profile, so no difference

The ram frequency has changed
I have no difference with the 3006 (same frequency/timings) and the R6E

Maybe tested with same frequence/timing, to see

You have changed the DRAM / FSB ratio ?