Search:

The response of 1003 and 2002 for my OC is the same... I'm using Maximus XII Formula 55x3, 54x5, 53x8 52x10 (+2Boost OCTVB) - Adaptive 1.45v.
The only thing I noted was that sometimes I need to...

Does anyone have problem when enabling OCTBV MAX STRESS?
When I enable it, eventually I have BSOD @ idle...

BIOS V2002...
Changelog?
Any improvement for 10th Gen Intel?

Thanks for the information and the flow scheme Shamino.

I'm copletly stable with

53x3, 52x5, 51x8, 50x10
+2Boost_OCTVB
MAX_Stress = desable
SVID=trained (AC=0.56mohm / DC=1.1mohm)
LLC=4...

If I let "VMAX STRESS = AUTO" is it enabled? I think the default "AUTO" is disabled . Am I right?

By the way Ring 48x is fine with +2Boost_OCTVB. 49x crashed.

I changed MAX ring to 48x and start testing...

By the way, MAX STRESS is causing problems to my system.
I understand MAX STRESS limit VID to 1.500v, correct?
If I enable it, i don't have...

Hi Shamino,

I'm running
53x3, 52x5, 51x8, 50x10
+2Boost_OCTVB
SVID=trained
LLC=4
Adaptive = 1.460v
Ring down bin = Enable
Max=47

Hi Shamino,

How could I test the BAR in the new 1002 BIOS?

Tx.

Version 1002 Beta Version
2020/11/27

What is new ? Change log?

Usually the description of a parameter says if the default is enabled or disabled. This one don't say that. I use enable.

By the way, I'm running 55x3, 54x5, 54x8, 53x10 - Adative = 1,460.
...

Is the "V-MAX STRESS" option AUTO = Enable?

Mine 51x and 52x share the same curve... So why I asked...

https://rog.asus.com/forum/attachment.php?attachmentid=86860&d=1605457716&thumb=1&stc=1

In this example


5100MHz - V/F6=1.329 (+0.016) = 1.345v
5200MHz - V/F7=1.329 (+0.031) = 1.360v
5500MHz - V/F8=1.428 (+0.032) = 1.460v
Adaptive = 1.480v

Which VID will be 5300MHz?

Any frequency above 53x use the adaptive! If it is higher than V/F... This is from intel project...
Now I understood!
is it Right?

Tx Shamino !!!
I think I understood ... :)

So which is the better choice for the higher frequency?
Pump up V/F8 or add voltage thru adaptive offset?

I'm trying 54x3, 53x5, 52x8, 51x10...

Sorry @Shamino... This is not clear to me ... Could you explain with an exemple?

I have a doubt...

Which VID will be used for the maximum clock?
The adaptive or the V/F8?

Or is it the biggest one?

I'm impressed !

I use 54x3, 53x5, 52x8, 51x1 - Adaptive @ 1.46V LLC # 6

The CPU is running at +2boost at 5.6GHz completely stable !

Now we need a AI Suite updated for this adjusts !!!

And...

Every time I install memtweak, when I try to run it I have a driver error.
How to solve this?

I give up!


Aplicativo: ArmourySwAgent.exe
Versão do Framework: v4.0.30319
Descrição: O processo foi terminado devido a uma exceção sem tratamento.
Informações da Exceção: código da...

- System

- Provider

[ Name] Application Error

- EventID 1000

[ Qualifiers] 0

Uninstall was fine....
But I'm trying to reinstall and the installation never ends... It went about 40% and stopped.

I have a maximus xii formula and Armoury Crate never works fine for OLED.
I always have to open it and charge the OLED configuration. Now I'll try to remove and reinstall. I'll tell you if it woks...

Hi,

I need VCore=1.25 load to be stable @5.1GHz ...

I can do this with:

VID=1.34 and LLC=6
or
VID=1.28 and LLC=7

Glad you solve the problem... I had a PSU issue when I change my gtx to a rtx VGA... the system turning off.