Search:

Type: Posts; User: MeanMachine

Page 9 of 20 FirstFirst 6 7 8 9 10 11 12

Search: Search took 0.04 seconds; generated 170058 minute(s) ago.

  1. Qcode A2 is IDE Detect and post is not finding or...

    Qcode A2 is IDE Detect and post is not finding or recognizing your OS disk.
    Check all cabling and SATA Connections and make sure you have prioritized the HDD correctly in Bios. Just have the HDD...
  2. Replies
    2
    Views
    1,642

    Overclock settings

    Hi BuzzFuzz :)
    I can help you with your OC and Bios settings. The ASUS Bios is much more comprehensive than ASRock with better voltage control.
    You should first ensure your Bios is up to date to...
  3. Replies
    9
    Views
    2,350

    Hi tacticaljeeper :) First ensure the qcode is...

    Hi tacticaljeeper :)

    First ensure the qcode is 62 and not b2 as one is a memory training code and as your having issues with RAM then Try with another kit of RAM.
    You can distinguish between the...
  4. Replies
    7
    Views
    2,729

    Well that's ridiculous to have to send the MB...

    Well that's ridiculous to have to send the MB back for repair when proper diagnostics or any form of troubleshooting have not been done.
    If it's still FF then yes it's an unidentified fault which...
  5. Hi Patrick :) Qcode 50 is either mismatch,...

    Hi Patrick :)
    Qcode 50 is either mismatch, failure to initialize or an incompatibility with your DIMM modules. It's best to select RAM that's been tested from the MB QVL list although obtaining your...
  6. Replies
    7
    Views
    2,729

    Ok so whats happening now. Is that with the new...

    Ok so whats happening now. Is that with the new RAM>? h2sa2004.
    Are you still getting Qcode 61 or FF.?
    Did you clear CMOS before installing new modules.?
  7. Replies
    7
    Views
    2,729

    Qcode 61 is NVRAM Initialization (Non-Volatile...

    Qcode 61 is NVRAM Initialization (Non-Volatile Random Access Memory) Some USB devices can also cause this issue so best to just have Keyboard and mouse initially. If adding other USB devices and the...
  8. Replies
    19
    Views
    7,110

    Yes HOT (Heart of Thorns) is a great expansion...

    Yes HOT (Heart of Thorns) is a great expansion for when you get to level 80 as then you can get your gliding ability, Masteries, elite specializations and a new Revenant class.
    Glad your enjoying...
  9. Replies
    19
    Views
    7,110

    GW2 can be a little hard when you first start out...

    GW2 can be a little hard when you first start out as they don't provide many prompts on what to do. (Look for scouts)
    It's best to join a Good Guild (My GF runs a guild and the members are very...
  10. Replies
    3
    Views
    3,177

    The LN2 jumper is used only for extreme OCs using...

    The LN2 jumper is used only for extreme OCs using Liquid Nitrogen.
    Because Liquid Nitrogen (LN2) pushes component temperatures so low, semiconductors behave differently, causing sluggish electron...
  11. Replies
    19
    Views
    7,110

    Many who are sick and tired of WoW have migrated...

    Many who are sick and tired of WoW have migrated to GW2 which is free to play and you don't have to subscribe. It is more difficult however the graphics are far superior, You can PVP or WvW or simply...
  12. Some stores will and others will try not too....

    Some stores will and others will try not too. Insist that the modules do not work. I don't know the Law in your country however for me its RMA to place of purchase within 12 months or to the...
  13. Your MB supports up to 4133MHz OC DDR4 RAM...

    Your MB supports up to 4133MHz OC DDR4 RAM however, it also depends on the strength of your CPU IMC if or not they will work.
    The MB does not support that OC RAM you have,so return them as trying to...
  14. Anxiously awaiting Ryzen here too :p, I do hope...

    Anxiously awaiting Ryzen here too :p, I do hope ROG have AM4 boards ready in time cause no announcements made as yet. :confused:
  15. Hi Kaelon :) You are using 3400MHz DDR4 "OC"...

    Hi Kaelon :)

    You are using 3400MHz DDR4 "OC" RAM and the CPU is officially rated up to 2133MHz so your XMP profile may or may not be recognized.
    If it happens again then it would be best to...
  16. Congratz Chris :) you did well. Was it the RX 480...

    Congratz Chris :) you did well. Was it the RX 480 that got you there.?
  17. Replies
    72
    Views
    45,341

    Sorry if i'm off topic as most of the thread...

    Sorry if i'm off topic as most of the thread relates to M8 HERO. This MB is M8 Formula if it makes a difference.

    Iv'e been helping a friend with an issue who was getting a Qcode 19, 32 and CPU Red...
  18. Maximus VIII Formula Q code 7F (reserved for future ami dxe codes)

    Hi ROGers :)

    Iv'e been helping a friend with an issue who was getting a Qcode 19, 32 and CPU Red light. I advised him to first update his Bios to eliminate that possible problem.
    His new Bios is...
  19. Replies
    4
    Views
    2,364

    Hi ImErick :) There are a few things that can...

    Hi ImErick :)

    There are a few things that can throw up a Qcode 61, that is if it is indeed 61 and not b1.
    First I would check your RAM. Your CPU officially supports DDR4 1333/1600/2133 so 3000MHz...
  20. Replies
    20
    Views
    26,099

    Well it seems you are stable at your current...

    Well it seems you are stable at your current settings RazerWaleed and good performance when gaming.
    Be happy with what you have and enjoy your system. You can experiment with higher OCs as all...
  21. Replies
    16
    Views
    4,138

    Oooow very nice system timbo2410 :p Lots of...

    Oooow very nice system timbo2410 :p Lots of help here to OC that little beast. :D
  22. Replies
    20
    Views
    26,099

    Set you voltage to manual and you have headroom...

    Set you voltage to manual and you have headroom to OC more. Many have your chip at 4.6GHz. Your temps at 55C under load are excellent. :D
    You can raise the CPU Core voltage to have better stability...
  23. Replies
    16
    Views
    4,138

    If you require any further help timbo2410. :) ...

    If you require any further help timbo2410. :) You should update your profile for your system specs. That way we know what we are dealing with.
  24. Replies
    16
    Views
    4,138

    I would be happy with 3600MHz and 3733Mhz is a...

    I would be happy with 3600MHz and 3733Mhz is a lot to ask of your IMC. Very little difference and little to gain. If you want to try it but no guarantee.
    Raise Dram current capability to top...
  25. Replies
    16
    Views
    4,138

    To change from T2-T1 go to Extreme Tweaker...

    To change from T2-T1 go to Extreme Tweaker menu>DRAM Timing Control. Scroll down to DRAM Command Rate.
Results 201 to 225 of 498
Page 9 of 20 FirstFirst 6 7 8 9 10 11 12