Search:

Type: Posts; User: ReaperOneSIx

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Where can I change the VCCIN setting on the UEFI?

    Trying to get my overclock to work I just need to change the value for VCCIN can guys help me out
  2. tried manual work for a few minutes and BSOD.

    tried manual work for a few minutes and BSOD.
  3. Done it already looks fine to me

    Done it already looks fine to me
  4. in the UEFI it is on auto but when I change the...

    in the UEFI it is on auto but when I change the settings it won't boot
  5. My XMP profile don't work even when manualy set...

    My XMP profile don't work even when manualy set the timing to 14 -14- 14- 34 2t
  6. Replies
    16
    Views
    26,474

    Sticky: Where can I find these settings I've been looking...

    Where can I find these settings I've been looking for it since I've been trying to hit 4.5ghz on all cores
  7. Come on people I even use some of the...

    Come on people I even use some of the recommendations on the pinned post but nothing seem to work I might be missing something
  8. Can't overclock or use the XMP Profile I need help

    I tried everything changing out the ram timing to the 14-14-14-34, Set the Memory to XMP, set the core voltage at 1.32 and even 1.34 volts
    This is the specification of my rig.
    Case: Thermaltake ...
  9. It is but the fact this is my second failed...

    It is but the fact this is my second failed rampage v mobo I doubt i'll try to get it replaced
  10. Well the two gtx 1080 Tis work, the i7 5930K...

    Well the two gtx 1080 Tis work, the i7 5930K works, the hard drives work, the SSD works the memory work, PSU work. I just ran these hardware components on my spare Asus X99 Strix and it works just...
  11. Clearing the cmos by removing the battery didn't...

    Clearing the cmos by removing the battery didn't work still got 00 post message
  12. yes they are on

    yes they are on
  13. Yes those Leds were on

    Yes those Leds were on
  14. i hope removing the battery does work

    i hope removing the battery does work
  15. All the LED lights turn on, my led RGB lights on...

    All the LED lights turn on, my led RGB lights on graphics card and memory stick glows as well the RGB on the mobo. I'll try clearing the CMOS by removing the batteries. I did try clearing the CMOS by...
  16. My Rampage V 10 Is not posting 00 Post message

    I shut down my computer last night right before I went to bed. I turn it on this morning my PC would not boot up.
    I got 00 post message on my motherboard. I tried switching out the graphics card,...
  17. try rebooting it work on mine

    try rebooting it work on mine
  18. Sticky: I manage to push mine to...

    I manage to push mine to https://valid.x86.fr/tb8leq
    4504Mhz or 4503.8Mhz
  19. My motherboard is not detected on Asus Aura.

    My motherboard is not detected on Asus Aura.
  20. Help I'm still getting this error...

    Help I'm still getting this error
    https://drdump.com/UploadedReport.aspx?DumpID=19521991&SecondVisit=1
  21. what does this fix do?

    what does this fix do?
  22. I got this error Report has been successfully...

    I got this error
    Report has been successfully uploaded
    Thank you for sending the crash report. If this crash is already known or maybe even fixed, then you'll see the information below. If not, be...
  23. Asus Rampage V 10 Anniversary Overclock better than EVGA Classified X99 Motherboard

    I seem to have a higher overclock at least 100 to 200 Mhz faster on my Asus Rampage V 10 Edition versus my EVGA Classified Motherboard ( Board was defective reason why I went for Rampage) which to...
  24. Replies
    41
    Views
    13,449

    it fix my xmp profile

    it fix my xmp profile
  25. Ayne ridge

    Yes. Just to let you know in my old EVGA X99 Classified I had no problem enabling XMP but I do have an issue with it regarding Asus Rampage V 10 Edition. Nevermind I fix it I had to use Mode 3 on...
Results 1 to 25 of 30
Page 1 of 2 1 2