Search:

Type: Posts; User: Tonyboj

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Your CPU lacks PCI-lanes to enable all features...

    Your CPU lacks PCI-lanes to enable all features of this board.
  2. Yeah, all cores can boost to 5.0ghz, I think 2 of...

    Yeah, all cores can boost to 5.0ghz, I think 2 of them to 5.1Ghz. Avx-512 is by default 3700 mhz, and avx 3900.

    What is the problem if a CPU instantly reboots the computer when starting any kind...
  3. Since I donít know what a chiller is I assume it...

    Since I donít know what a chiller is I assume it is not suitable when my home office is in the corner of our living room ;)
    From stock the AVX loads were set on 3.9 and 3.7 I think. Is it still not...
  4. 9990xe - is it even possible to manage cooling and power?

    No answers on my previous thread so I'll be frank. I was about to purchase this overpriced strange specimen for my business but did a mistake when ordering and purchased it personally. A part of me...
  5. 1.492 volts on 14-cores - what is adequate cooling?

    Hi guys, does anyone have a feel for the Skylake-X HCC CPUs cooling requirements.

    Running 14 cores at 1.49 volts for specific workloads and benching - would a custom waterloop with 2-3 radiators...
  6. Replies
    9
    Views
    889

    Instant crash in Prime95, everything else is...

    Instant crash in Prime95, everything else is stable. I "need" it stable in Prime95 since the stock configurations is rock solid in every and all benchmarking apps.

    I read somewhere there where...
  7. Replies
    9
    Views
    889

    Thank you for the feedback. I'll give it a shot....

    Thank you for the feedback. I'll give it a shot. If the rumored AMD will best this 9980 in Cinebench the OC is really needed to defend my purchase. ;)
  8. Replies
    207
    Views
    19,481

    Valid

    For some reason I get "Not a valid bios file" after reading it from USB or HDD from Bios Update. Any solution? Only tried the 5e microcode.
  9. Replies
    9
    Views
    889

    I would be thrilled with any and all information...

    I would be thrilled with any and all information you can provide me. Right now I've been comfortably benchmarking 4.7 (2 cores) 4.4 (16c) with per core adjustment on the two 4.7 cores at adaptive...
  10. Well, only one M.2 drive (rest of them are PCI-e...

    Well, only one M.2 drive (rest of them are PCI-e and U.2...). The Samsung 960 Pro which I placed below the plastic on the motherboard.
    Temperatures look okay except from the maximum on temp 2...
  11. Rampage VI Extreme Temperature Sensor Location and PCH

    When using HWiNFO it reads thermals from the Nuvoton NCT6796D on the Rampage board.

    This is the readout.
    80147
    Do you guys know what Temp 2-5 are? Location?
    Also, is it relevant to keep the...
  12. Replies
    9
    Views
    889

    Silicone Lottery, 7th Time The Charm

    Been reading this forum for while now and I must say there is a crazy amount of good advice and knowledge when you start digging. Thank you guys for that.

    Alright. I put together my new rig during...
  13. I have the Optane 900P 480GB as an AIC and two...

    I have the Optane 900P 480GB as an AIC and two Optane 900p 280GB as U.2 drives. The U.2 drives hoover around 25C whereas the PCI-e counterpart sits close to 50Celsius. Of course the proximity to the...
  14. I'll be following this. I really want to put...

    I'll be following this. I really want to put together a custom loop for my own build so I'll replicate what I can. Good luck!
  15. Thread: 5930K vs 5960X

    by Tonyboj
    Replies
    9
    Views
    794

    Looks good, only thing I would make sure is that...

    Looks good, only thing I would make sure is that DRAM is fixed at a minimum of 1.35-1.38. The bios reading is showing ~1.2. Also, if I remember correctly, wasn't SVID support supposed to be enabled.
  16. I know it can handle a 560 in the front and a 480...

    I know it can handle a 560 in the front and a 480 on the top, but the third one has to go on the "side" and then the maximum is 360mm. This is with a dual-PSU build. Even with the EEB form factor the...
  17. I am quite sure it wont work with the 970 Pro....

    I am quite sure it wont work with the 970 Pro. The SM961s from Samsung will work also the P4500-series from Intel. More conveniently the 7600p works (not to be confused with consumer 760p).
  18. I'm probably not well ;) but after checking your...

    I'm probably not well ;) but after checking your components I think I "need" this board and processor. Do you know if they learned from their mistakes with the VROC on R6E (where only some specific...
  19. I've tried them all. Without hesitation I'd...

    I've tried them all. Without hesitation I'd recommend the Phanteks Enthoo Elite.

    Is it for benchmarking?
  20. Thread: 5930K vs 5960X

    by Tonyboj
    Replies
    9
    Views
    794

    I've never been a fan of using the Balanced power...

    I've never been a fan of using the Balanced power profile in Windows. But if you want to do it successfully you'll have to boost ring voltage/cpu input voltage/pwm phase and dram, then it will work...
  21. Replies
    1
    Views
    323

    I would pick the RTX 2080 instead of the 2070....

    I would pick the RTX 2080 instead of the 2070. The former safely keeps you above 60 fps in 1440p. (https://www.youtube.com/watch?v=Qbz7VrsH-ik) and gives you almost 30% more CUDA-cores and streaming...
  22. Replies
    4
    Views
    597

    As I understood before buying the 9980xe, it was...

    As I understood before buying the 9980xe, it was just a soldered version of 7980xe. Would therefor spare me going through a delidding process which I lack both courage and money for (in case...
  23. Replies
    4
    Views
    597

    9980XE OC advice?

    Hi all, for years I've been running a 5960XE at 4.4Ghz and it gave me good performance. I built a new workstation last month and would really like to get a decent overclock going to really feel the...
  24. Replies
    0
    Views
    234

    Finishing touches on new build

    Hi all,
    Any ideas how to really push this machine over the top? Before this I had a X99 with 5960x @4.4GHz for exactly 4 years so I want this upgrade to really shine because the old one was...
  25. Replies
    3,475
    Views
    1,200,331

    Sticky: Hi all

    77649

    Hard-working computer snob. Mostly use my workstation for creative but also have a keen interest in OCing. Only moderately skilled at the latter.
Results 1 to 25 of 26
Page 1 of 2 1 2