Search:

One question and then some suggestions and info.

Why are you running a 10.0.0 .x network, is it a subnetwork?

In case you do not know, the 5 Ghz 2 radio is a 1x1 radio where the 5-1 is a 2x2...

@Andrew_2468 Have you checked the Wi-Fi Radar and Wi-Fi site survey?

93213

I used the AX11000 for a couple of years with no problems but currently on the AXE11000. No Ai Protection on either device.

If you can't see a radio you need to check the WPA version you are...

Using "Other OS" is not for Windows 11. You need the TPM 2.0 (PTT) and Windows chosen as the OS and the CSM needs to be disabled.

The drive has to be configured correctly with the UEFI install. ...

I just noticed this and it has a price. There does not seem to be a guess as to when it will be available.
...

You should be able to enable CSM in secure Boot. But Win 7, which the processor may not run, is considered an Other OS for those options.

Most of these boards came with it enable but with the...

OK, thanks I had not noticed that setting before. We will see what the AXE16000 shows if they ever start selling it. The 1 Gbps indication may be your and my current connection limit from our...

In order to test, you would need to have an ISP download of 2 Gbps or higher. I have seen no proof the 2.5 Gbps port is actually 2.5 for WAN and LAN or just LAN.

Maybe, one day I will have a...

I have seen it on the website for a while but no price associated. I have been watching a Dell Monitor which is showing a moving 9 week delivery date. I assume this is because of the China...

I see comments in the log that might indicate a Firmware update, do you have it set for auto updates?

@ jzchen OK, I give up. I don't see that number shown in the Admin section, could you please explain where you see the memory usage number?

Luckily, my system as been up for 40 days without...

Maybe a couple of questions. First, are looking at only speed transfers between the GoPro camera and your system? Next, what is the model of the SD card you are using in that camera? And last, to...

The oemxx.inf files are just renamed from the original ,inf file so that means nothing.

I was wondering if you had only installed one of the devices. If that were to be the case then it may have...

I just did mine and the end result seems to be the drivers are installed and no problems seen.

The install was a little strange in that I started the ASUS setup utility and the UAC popped up...

Before I try that driver update, did you have the Ethernet cable plugged into either port and if you did, which one?

I was looking at the .pdf file included in the driver download and it mentions...

The necessary drivers are on the download site but you will have to expand out the sections to see all included in that group.

Windows seems to be very good about updating your Wi-Fi drivers so...

When the motherboards first came out, some folks were having problems with 64 GBs of memory, I can't remember how many DIMMs. I am currently running mine with 4 x 8 GB at 4000.

You might mention...

It turns out my Z490 board has the SupremeFX 7.1 audio but uses the S1220 codec instead of the S1220A codec.

Otherwise, it is pretty much the same, so I connected my 5.1 speakers to that system...

I was involved on a thread on the Intel site with a person running a strix Z690-f gaming board. The problem is when setting up the mobile hotspot and trying to use the 5 GHz radio, the setup states...

When you check the Device Manager make sure and use the View options to show hidden devices. It may show up there but that would mean it was currently disconnected.

The AX201 card uses components...

You have several devices which show as not present so that just means no connection is available or made. Since it does see the card, can I assume it does show up in the Device Manager and what...

Are you completely sure the headphones are not being picked up as communication devices?

I think Microsoft has bent over backwards to make these systems see a headset and set it up that way to...

The update finally showed on the US site and installed without issues, so far.

Thanks

Just in the off chance you might be using it, the manual shows 8 channel sound is not supported with 32 bit/192 KHz audio.

If you are using it you might just try changing it to see if it makes...

What I am wondering is the FX8 is described as Channel Definition Audio. If that means it is what is turning your stereo into 5.1, possibly it is not installed or not working correctly. Do you see...