Search:

Type: Posts; User: Silent Scone@ROG

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    1
    Views
    71

    Hello, Try the following. Activate XMP Profile...

    Hello,

    Try the following. Activate XMP Profile 1 and enter the below manually

    VDD 1.3v

    VDDQ 1.35v

    TXVDDQ 1.3v
  2. Hello, Can you confirm if this happens with...

    Hello,

    Can you confirm if this happens with the system at Optimised Defaults in the UEFI (no XMP or any overclocking).
  3. 1) Yes, the GPU will revert to 8x lane speed. ...

    1) Yes, the GPU will revert to 8x lane speed.

    2) Yes, PCIE 4 & SATA modes are supported

    Anything pertaining to slot configuration and lane speed should be available in the manual ;)

    I...
  4. But not together, right? Memory sold as a kit...

    But not together, right?

    Memory sold as a kit is binned in the density they are sold in. As soon as you combine them, you eat into the guardband put in place by the memory vendor designed to...
  5. Lesson here, read the manual if unsure ;)

    Lesson here, read the manual if unsure ;)
  6. Hello, Try the following: VDD 1.2v VDDQ...

    Hello,

    Try the following:

    VDD 1.2v

    VDDQ 1.2v

    TXVDDQ 1.2v
  7. Joining the party with my personal rig. Only have...

    Joining the party with my personal rig. Only have Micron 4800C38 at the moment (5200 C32)

    3x 54c 5x 53c 1x 52c 1.37v 12900KF - Apex

    Not the best silicon, but as always it is what it is.
    ...
  8. Replies
    13
    Views
    188

    Hello, The F series CPU is a locked CPU. The...

    Hello,

    The F series CPU is a locked CPU. The only way to overclock them is to use BCLK.
  9. If people are using Channel B1 and B2 for 2x DIMM...

    If people are using Channel B1 and B2 for 2x DIMM configuration then you're only using a single channel, which is easier on the IMC and memory.

    Use A2 and B2 as per the manual.
  10. Replies
    19
    Views
    953

    Hello, I personally managed to pick up a set in...

    Hello, I personally managed to pick up a set in the UK of Kingston Fury 4800C38. They were actually in stock for quite a few days but now sold out (around 30 kits).

    Unfortunately for any...
  11. Hello, Try increasing VDD and VDDQ to 1.25v

    Hello,

    Try increasing VDD and VDDQ to 1.25v
  12. Replies
    4
    Views
    237

    Hello, Have you updated to the latest UEFI?...

    Hello,

    Have you updated to the latest UEFI? There are some known compatibility issues on the release build.
  13. Hello, Yes, this shouldn't be an issue.

    Hello,


    Yes, this shouldn't be an issue.
  14. Hello, Update to the latest UEFI as...

    Hello,

    Update to the latest UEFI as instructed. However, that is a two DIMM memory kit. If needing to ask these questions, one should refrain from mixing memory kits.
    ...
  15. Hello, Can you confirm if this issue occurs...

    Hello,

    Can you confirm if this issue occurs when the UEFI is at complete default settings? This includes no XMP or overclocking of any kind. Rule 101 of diagnostics is to remove any culprit of...
  16. Hello, If running a GEN 5.0 NVME you must use...

    Hello,

    If running a GEN 5.0 NVME you must use M.2_1 as per the MB manual. This is however an 8x/4x configuration.
  17. Replies
    4
    Views
    161

    Hi, No it should not. Only the base driver is...

    Hi,

    No it should not. Only the base driver is needed by default. Windows has these in their library.
  18. Replies
    2
    Views
    260

    Hello, all Z690 boards are daisy chain...

    Hello,

    all Z690 boards are daisy chain topology. Optimem is additional enhancements to the existing daisy chain topology to maximise signal integrity. It will aid in running more dense memory...
  19. Replies
    7
    Views
    230

    Hi Nate, For the sake of clarity, it's...

    Hi Nate,

    For the sake of clarity, it's actually current that is the prime cause of degradation, or more current being proportionate to the frequency and voltage.


    At stock operation, degrading...
  20. Hello, Please note best performance on Zen is...

    Hello,

    Please note best performance on Zen is found around 3600 to 3733 as memory performance is optimal when ran in a 1:1 ratio with the Infinity Fabric (FCLK). Stability above 1800 FCLK can...
  21. Hello, Most of the settings in the CBS menu...

    Hello,

    Most of the settings in the CBS menu and beyond offer very little benefit, this platform largely overclocks itself once PBO is enabled. It really depends on your intended workload as to...
  22. Replies
    8
    Views
    541

    Image taken from Scatterbench, shows which CL...

    Image taken from Scatterbench, shows which CL values are supported.

    90465

    https://skatterbencher.com/2021/11/04/alder-lake-overclocking-whats-new/
  23. Replies
    3
    Views
    173

    Hi, You're referring to a monoblock such as...

    Hi,

    You're referring to a monoblock such as the one present on the Extreme Glacial. Adopting early means this is likely your best option until more products come to market.
  24. I would still consider using DDU and removing the...

    I would still consider using DDU and removing the driver entirely when replacing a GPU.
  25. Replies
    3
    Views
    275

    Hello, Yes, the ESS DAC is still only...

    Hello,

    Yes, the ESS DAC is still only accessible from the front panel only.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4