Search:
Type: Posts; User: Murph_9000
Search: Search took 0.01 seconds; generated 98934 minute(s) ago.
-
11-28-2022, 07:17 PM
Thread: asus rog ryujin ii 360 CPU Temp
by Murph_9000- Replies
- 5
- Views
- 491
One more thought. I certainly wouldn't mind if...
One more thought. I certainly wouldn't mind if there was a choice of which temperature to use. Ideally that choice would include the water temperature (it has a sensor for that), which is better...
-
11-28-2022, 06:29 PM
Thread: asus rog ryujin ii 360 CPU Temp
by Murph_9000- Replies
- 5
- Views
- 491
Right now, it only uses the CPU temperature, not...
Right now, it only uses the CPU temperature, not the package temperature. Personally, it really doesn't bother me, with a 5950X running over 200W peak and a Ryujin II 360; I get plenty of cooling...
-
11-27-2022, 08:52 AM
Thread: X670E Hero RAM Compatibility
by Murph_9000- Replies
- 2
- Views
- 573
That particular part number is not on the ROG...
That particular part number is not on the ROG Crosshair X670E Hero Memory QVL. Currently, there are no 4 DIMM configs on the QVL; that's the "socket support" column, which would be "1,2,4" for a 4...
-
11-27-2022, 12:57 AM
Thread: Ryujin II Pump Speed Capped at 1770rpm
by Murph_9000- Replies
- 9
- Views
- 416
On the AC Update Center (Version: 5.3.4.0), under...
On the AC Update Center (Version: 5.3.4.0), under ROG Ryujin II, I have:
ASUS framework service
Version: 3.1.1.0
ASUS Core SDK
Version: 2.00.16 -
11-26-2022, 11:14 PM
Thread: Ryujin II Pump Speed Capped at 1770rpm
by Murph_9000- Replies
- 9
- Views
- 416
Yeah, half speed is more or less sufficient to...
Yeah, half speed is more or less sufficient to keep even the 9-series processors under control in normal use. Something isn't working properly though, if you can't get full speed. It's difficult to...
-
11-26-2022, 11:06 PM
- Replies
- 5
- Views
- 341
It shouldn't need much force to plug onto the...
It shouldn't need much force to plug onto the header. Just make sure the blank pin on the connector and header is aligned. It should fully cover the height of the header pins when installed. It's...
-
11-26-2022, 09:11 PM
Thread: Ryujin II Pump Speed Capped at 1770rpm
by Murph_9000- Replies
- 9
- Views
- 416
I have the pump rpm in an info page on the Ryujin...
I have the pump rpm in an info page on the Ryujin display, so can see the reported speed there in fixed mode.
-
11-26-2022, 08:08 PM
Thread: Ryujin II Pump Speed Capped at 1770rpm
by Murph_9000- Replies
- 9
- Views
- 416
I can certainly set my Ryujin II to 2800 rpm (in...
I can certainly set my Ryujin II to 2800 rpm (in fixed RPM mode, or via the smart mode curve) and it reports running at around that speed. It does take a second or two to respond to changes in the...
-
11-26-2022, 04:52 PM
- Replies
- 5
- Views
- 341
The front panel ARGB in the Helios is the simple...
The front panel ARGB in the Helios is the simple "gen 1" type, so doesn't talk back to the motherboard for AC to detect (that's "gen 2"). The motherboard just sends RGB patterns blindly. There's...
-
11-26-2022, 04:28 PM
- Replies
- 4
- Views
- 466
Yes, the X and XE processors were the HEDT...
Yes, the X and XE processors were the HEDT offering. Despite the very similar marketing names, the HEDT processors were a completely different family from the mainstream processors. They were cut...
-
11-25-2022, 10:10 AM
Thread: processor motherboard pins
by Murph_9000- Replies
- 7
- Views
- 594
Can't really say much about it. It looks like...
Can't really say much about it. It looks like there's a bit of crud or damage or something between two of the gold pads, but the resolution of the image is too low to really see what it is. If it's...
-
11-25-2022, 07:17 AM
- Replies
- 4
- Views
- 466
X299 is HEDT, but both AMD & Intel have abandoned...
X299 is HEDT, but both AMD & Intel have abandoned HEDT for now. AMD more or less won the HEDT war with Threadripper 3000, Intel gave up, then AMD also exited the HEDT segment with 5000 series (not...
-
11-24-2022, 08:56 PM
- Replies
- 3
- Views
- 739
Mixing different DIMMs can be problematic, as can...
Mixing different DIMMs can be problematic, as can more than 2 DIMMs in total (it's unclear if you were trying a 3 or 4 DIMM configuration). If you really need/want to go beyond 2x32, 4 matched DIMMs...
-
11-23-2022, 12:49 AM
- Replies
- 8
- Views
- 957
There are no 2x64 or 4 DIMM configurations...
There are no 2x64 or 4 DIMM configurations currently on the ROG Maximus Z790 Hero Memory QVL. The "Socket support" column is important, telling you how many sticks are validated, and is currently...
-
11-23-2022, 12:33 AM
Thread: Rog Strix B650 E-E Steam Launch Issue
by Murph_9000- Replies
- 10
- Views
- 579
Enable "Run Steam when my computer starts" in...
Enable "Run Steam when my computer starts" in Steam > Settings > Interface.
It has nothing to do with your hardware or OS. Steam takes a while to start from cold. Enabling that option runs the... -
11-22-2022, 08:17 PM
- Replies
- 6
- Views
- 416
It shouldn't need excessive force to insert. The...
It shouldn't need excessive force to insert. The connector on the left doesn't have the same keying as the socket. Both of my 4+4 cables are in use and difficult to extract for examination, so I...
-
11-21-2022, 07:02 PM
- Replies
- 6
- Views
- 416
Those 4+4 cables certainly work fine for ATX_12V...
Those 4+4 cables certainly work fine for ATX_12V 8 pin on the Crosshair VIII Extreme. They can be a bit fiddly due to having to hold the two halves together to use them as 8 pin, and get them...
-
11-21-2022, 06:07 PM
- Replies
- 6
- Views
- 416
There were two 4+4 EPS cables included with my...
There were two 4+4 EPS cables included with my Thor 1200P; those should work for the 8 pin EPS connectors. If you need additional cables or extensions, ASUS recommend CableMod. There may be a...
-
11-19-2022, 09:25 PM
- Replies
- 2
- Views
- 284
That's probably your CPU temperature. There's a...
That's probably your CPU temperature. There's a BIOS setting to enable/disable that mode on the X570 boards, I'd guess X670 has it as well. When enabled, you get Q codes during POST, then CPU...
-
11-18-2022, 12:40 PM
- Replies
- 10
- Views
- 2,749
I would stick with the recommended screws, just...
I would stick with the recommended screws, just don't go after every last thread when tightening if it gets tight before the threads run out.
-
11-18-2022, 12:30 PM
Thread: processor motherboard pins
by Murph_9000- Replies
- 7
- Views
- 594
The top image does look like possible pin damage,...
The top image does look like possible pin damage, the bottom not so much (although there are a couple of spots that could be damage). Can't say for sure, as the image resolution is too low, and a...
-
11-18-2022, 12:24 PM
Thread: Z790-F - No network connection
by Murph_9000- Replies
- 23
- Views
- 3,603
These FAQs may help: [Motherboard]...
These FAQs may help:
[Motherboard] Troubleshooting - How to install Windows 11 Pro/Home operate system on AM5 or Intel Z790 series motherboard with Intel Lan?
[Motherboard] How to download and... -
11-18-2022, 12:12 AM
- Replies
- 10
- Views
- 2,749
One possibility for a bad memory channel is a bad...
One possibility for a bad memory channel is a bad CPU mount. Either pin damage, uneven pressure, or too much pressure from the cooler.
The Intel LGA1700 clamping mechanism is essentially a bad... -
11-17-2022, 01:48 AM
- Replies
- 2
- Views
- 179
I had a brief play with RAIDXpert2 on the...
I had a brief play with RAIDXpert2 on the Crosshair VIII Extreme (X570S) on Windows 11 Pro, before deciding that it didn't look much like a reliable product (the AMD software part of it). I've got...
-
11-16-2022, 02:22 PM
Thread: DSL-AX82U-AX5400 NAT Issue
by Murph_9000- Replies
- 11
- Views
- 525
Tried the DH2I test, and it's saying "Permissive...
Tried the DH2I test, and it's saying "Permissive NAT" (i.e. not symmetric) for my GT-AX6000. Yeah, some analysis would be needed to see if they are the same (and possibly repeating a bug) or truly...
Results 1 to 25 of 200