Search:

There is also a preconfigured set of profiles for memory in the memory timings section of the bios depending on whether it’s Samsung, Hynix, etc. There may be a profile present in that section that...

Thanks. Figured I would need to go into bios for adjustments.*

Having trouble with making changes in memtweakit. Dialed in most settings. Especially the primary and secondary timings. Is there another application capable of making changes to the timings? Primary...

BTW-Yes, I am running a single kit 32g on this machine.

I’ll try those. Thanks again!

Thanks!! I’ll try that but what voltage are you recommending? I was running VDD and VDDQ at 1.4 as above. It’s Hynix memory so some say it doesn’t scale well past 1.25v on VDDQ. I thought I did have...

I have tried everything to stabilize this memory kit on a MZ690E and MZ690EG with no success. Guess I’ll try again when the 13900k is available.

Mine was fine before the update. And it’s strange that it seems the motherboard leds themselves seem to be correct but the leds on my case connected to RGB header and leds to my ekwb combination...

There are leds around the motherboard which appear to be responding to the shutdown correctly but the RGB and aRGB don’t. The latter still has the rainbow effect despite making the preferred...

I'm trying your fix, but I also have this so I can't tell you if it worked yet:

94418

Perhaps related to power? Shutting down the system completely causes it to reset. A simple reboot likely doesn’t.

Thanks. I didn’t have this problem until I started using the new crate version just released. Â*

Mine has had the same behavior all day. Tried to change settings just to see what would happen and no change. Still defaults to the rainbow effect.

This new version 5.2.12.0 does not allow me to change the shutdown effect on my MZ690E. I can even disable the shutdown effect but it still defaults automatically to the rainbow effect. Changing to...

I probably will but I’m a hardware nut. I just like to assemble PCs to see the incremental increase in performance. For most that makes no sense simply because it’s not necessary. Depends on what you...

You should be installing from a formatted USB drive with UEFI prefix. Maybe your installation media is not assembled correctly? You can create installation media at Microsoft website. CSM should be...

Does the drive say something like UEFI:…….? I think the bios natively disables CSM so it must be installed UEFI. Also in the boot menu, Secure boot should be windows UEFI mode under OS type.

You’re not able to go to the boot menu in the bios and boot device override and click on the usb drive containing windows to start the install?

https://www.techpowerup.com/297077/intel-raptor-lake-launch-and-availability-dates-revealed *

There’s probably a 6 pin power connection that’s necessary as well.

Are all power connectors plugged in?

Still with stability problems trying to tune this MZ690EG, F5-6400J3239G16GX2-TZ5RK by GSkill, bios 1601, 12900KS, windows 11.

VDD/VDDQ 1.4
SAV 1.49
MCC 1.35

Manual Settings, Tweak Mode 2,...

There may have been settings in the bios which were wiped out when you updated to 1601. I would make notes and take pictures of all the bios settings if you have to take it back.

And check the QVL too:

94183*

You might just use one stick of memory to test as well. Is this the kit you bought?

*https://www.newegg.com/patriot-32gb-288-pin-ddr5-sdram/p/N82E16820225305