Search:

Type: Posts; User: Silent Scone@ROG

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Some IC don't have thermal probes

    Some IC don't have thermal probes
  2. The Quick Charge header requires a PCIE 6 pin. If...

    The Quick Charge header requires a PCIE 6 pin. If you're not using the USB C header port, there's no need to install the cable. Or equally if you do not plan to plug in devices that will draw 60W
  3. You're not alone. This was a "royal you" post and...

    You're not alone. This was a "royal you" post and not aimed directly at you. If anything you did the right thing by asking before making a purchase!
  4. It's difficult not to sound like a broken record,...

    It's difficult not to sound like a broken record, but Please don't combine memory kits and ask why XMP will not work.

    This is a historical issue enthusiast face that will probably continue....
  5. Replies
    9
    Views
    307

    Hello, so what happens exactly, does it get...

    Hello,

    so what happens exactly, does it get stuck on a Q-Code when updating? What happens when you use EZ Flash from the UEFI? Once the UEFI has completed pre-checks, the system should reboot...
  6. Sticky: Per C 54/53/52 Adaptive 1.37v Cache 40 E Core...

    Per C 54/53/52
    Adaptive 1.37v
    Cache 40
    E Core 41 Sync

    IMCVVD 1.33
    SA 0.98
    VDD 1.48
    VDDQ 1.48
    TX VDDQ 1.52
  7. Hello, You won't. 4X16 6K isn't possible. ...

    Hello,

    You won't. 4X16 6K isn't possible.


    If you're combining memory kits, which isn't recommended, you'll have to tune manually. Aim for between 4400-4800


    Easiest approach is a...
  8. Hello, stick to 1.35 and below if possible. As...

    Hello, stick to 1.35 and below if possible. As with previous iterations, VCCSA is sensitive to excessive voltage so tune methodically.
  9. Hello, Make sure to download and install...

    Hello,

    Make sure to download and install Chipset, Bluetooth, NIC and RST drivers.
  10. Replies
    12
    Views
    1,563

    Hello, Can you please show where in the manual...

    Hello,

    Can you please show where in the manual it states this?

    The power source for the PCIE and the header is shared. If you wish to plug-in devices that draw 60W from the front header, the...
  11. Hello, it sounds as if you are confusing the 8...

    Hello, it sounds as if you are confusing the 8 pin PCIE power cables with the 8 pin EPS for the motherboard. Make sure you are trying to install the correct cable, as the pinout is different. The PSU...
  12. Hello, Those temps are normal, especially...

    Hello,

    Those temps are normal, especially without active airflow. Thanks to the PIMC the modules pack more heat.

    This is well within tolerance, the only "danger" is when pushing the modules to...
  13. Hello, The Q-Code depends on what sleep state...

    Hello,

    The Q-Code depends on what sleep state the system resumed from. It can be impacted by what C-States are active and whether the operating system is utilising hybrid shutdown.

    Ultimately,...
  14. Replies
    23
    Views
    558

    It never really has done, not since DDR4. That...

    It never really has done, not since DDR4. That isn't to say the system won't be stable - but I would almost always run Karhu Ramtest or TM5 also.
  15. Those presets are far tighter than XMP, too....

    Those presets are far tighter than XMP, too. That's what they're there for, and what the board is made for
  16. Replies
    23
    Views
    558

    From experience, I find that having Memtest86...

    From experience, I find that having Memtest86 integrated in the BIOS is a godsend for one reason - not breaking the OS with very unstable settings. Once you get a baseline, you can move on to...
  17. Hello, 16x4 is always going to be tough at...

    Hello,

    16x4 is always going to be tough at those speeds. You're likely going to need more than 1.1v SOC, too. What Q-CODE does the board hang on?

    Test up to 1.2v SOC and see if this helps...
  18. That's a complete falsehood, I'm afraid. DOCP is...

    That's a complete falsehood, I'm afraid. DOCP is the same as XMP - it's overclocking. No vendors guarantee any overclock, not even the memory vendors. The "problem" is that the particular CPU isn't...
  19. Yes, memory kits are binned in the DENSITY they...

    Yes, memory kits are binned in the DENSITY they are sold in. This means if you combine kits, regardless of PN, manufacturer, or what socks you had on when you bought them, you eat into what's...
  20. 64gb over 4K is going to be tough. Not all ...

    64gb over 4K is going to be tough. Not all Coffeelake CPUs will do this.

    Lower frequency to 4000Mhz from 4133 and see if things improve.

    Here is a previous venture on the Maximus Formula...
  21. Hello, I’m using this kit on the Apex and have...

    Hello,

    I’m using this kit on the Apex and have had up to 6600 working. If on the Apex I’d suggest using the Samsung profiles. MC VDD and SA CPU specific so tune these accordingly.
  22. 4 matched modules, or rather 4 modules binned as...

    4 matched modules, or rather 4 modules binned as one kit to work at a set of timings and frequency, are far less problematic if one has a good methodology in tweaking.

    The problem some are facing...
  23. Hello, this is normal, the system is conducting...

    Hello, this is normal, the system is conducting memory training and initializing controllers.
  24. Hello, Check if you're on the latest UEFI. ...

    Hello,

    Check if you're on the latest UEFI.

    Try increasing VDD and VDDQ voltages to 1.4v.
  25. Sticky: Hello, If 5200 XMP then it's most likely...

    Hello,

    If 5200 XMP then it's most likely Micron.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4