Search:

Type: Posts; User: DERTY13

Search: Search took 0.00 seconds.

  1. Status update. Completely different board and all...

    Status update. Completely different board and all the same components posts completely fine. Will now have to diagnose the Z2E at the store and see what’s up with it. Frustrating and statistically...
  2. The VGA light is no longer an issue. It was a...

    The VGA light is no longer an issue. It was a tolerance issue with the case allowing the card to fully seat. I can now get it to use any card on the bench and it will advance through the VGA light...
  3. Yes. I performed that for both boards. ...

    Yes. I performed that for both boards. Confirmed that the flashback was successful. No change in results.
  4. No news update. Removed the board from the case...

    No news update. Removed the board from the case and went total benchtop. No change in the post error. WRT the graphics card fit I did check that out with the heat shroud and it's fine on the...
  5. I saw that thread as well. Also keep in mind,...

    I saw that thread as well. Also keep in mind, this is the second Zenith II Extreme I've tried. Tonight's plan is to obtain a completely different motherboard model and try to answer that question. ...
  6. Zenith II Extreme - Post error, will not boot

    I've been trying to figure out why this new build is failing to boot. The machine does all it's normal checks but ultimately just displays a post error. I've been through one round of support with...
Results 1 to 6 of 6