Search:

Type: Posts; User: MeanMachine

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    4
    Views
    67

    DIMM slots are for RAM modules, review your MB...

    DIMM slots are for RAM modules, review your MB Layout again as they have nothing to do with your storage drives.
    Check your SATA connections for the correct connections (page 1-23 in your MB...
  2. Replies
    4
    Views
    67

    HI apocalypzez :) POST cycle will not...

    HI apocalypzez :)

    POST cycle will not continue until the error with your HDD or SSD is fixed and you will continue to get QCODE A2. You will receive an A2 error if you do not have any drive...
  3. Replies
    2
    Views
    212

    Intel speed step is used by tree huggers to save...

    Intel speed step is used by tree huggers to save a little power when at idle. It is usually on by default. Clever tech for what it does.
    As a power user I have disabled it (as well as C1E sleep...
  4. G.SKILL 16GB KIT DDR4 3200MHz CL14 Flare X for...

    G.SKILL 16GB KIT DDR4 3200MHz CL14 Flare X for AMD is OC RAM and therefore D.O.C.P profile will not work as they exceed the JDEC standard.

    If you check with CPUz in Windows (or the Tools section...
  5. Go into your Bios>Extreme Tweaker menu>AI...

    Go into your Bios>Extreme Tweaker menu>AI overclock Tuner and set to manual. This will allow you to change your multiplier.
    You can bring your Bios back to default by removing the MB CMOS battery...
  6. I think your misunderstanding a few things Tony....

    I think your misunderstanding a few things Tony.

    Your 3200MHz RAM would default to 2400-2666MHz initially as 3200MHz is beyond the JDEC standard and therefore you will have to manually enter your...
  7. Replies
    48
    Views
    1,825

    : Who told you that :mad: cause here's my one...

    :
    Who told you that :mad: cause here's my one hundredth time stamp for "ACCESS DENIAL"
    Access Denied

    timestamp: 2019-07-01 10:53:09
    event ID: 1135950231649268773910918305311897569673...
  8. Replies
    1
    Views
    336

    QCODE 00 is a hardware error and not necessarily...

    QCODE 00 is a hardware error and not necessarily a CPU error. It has also been found to be due to DIMMs training/failing or poor cabling conditions. In fact I have seen many posts determining it to...
  9. Yes those temperatures are abnormally high. ...

    Yes those temperatures are abnormally high. Always best to list your full system specs with these type of issues.

    First ensure the H100i pump is indeed operational and the heat sink brackets are...
  10. Replies
    48
    Views
    1,825

    I'm now marking all threads where Access Denial...

    I'm now marking all threads where Access Denial comes up with the following. "Unable to respond due to ACCESS DENIAL".
    It seems to be due to certain characters or by the size of the post, not sure...
  11. Replies
    3
    Views
    464

    Unable to respond due to ACCESS DENIAL.

    Unable to respond due to ACCESS DENIAL.
  12. Replies
    8
    Views
    460

    There is a Forum bug denying access to some...

    There is a Forum bug denying access to some threads, Why this is happening, well we don,t know and it's been happening for a while.
    I tried to respond with information for you without success. There...
  13. Replies
    8
    Views
    460

    unable to address your issue due to access denial

    unable to address your issue due to access denial
  14. Replies
    1
    Views
    119

    Hi joseleg :) Qcode 00 is not documented and...

    Hi joseleg :)

    Qcode 00 is not documented and generally considered to be a hardware fault found error, and difficult to diagnose the hardware culprit, however:

    Quote/ I test outside the case...
  15. When you hit the Power button to turn on the...

    When you hit the Power button to turn on the system, It goes through Post (Power on self test) where your hardware components are interrogated. Once all is OK then it boots to your OS. As your yellow...
  16. Replies
    48
    Views
    1,825

    Whatever it is, It's a bug and needs to be...

    Whatever it is, It's a bug and needs to be fixed. It seems random for some and not reproduced with links.
    Its been a week and nobody in admin or the Web master has done anything. What's going on...
  17. Replies
    48
    Views
    1,825

    Whatever it is, It's a bug and needs to be...

    Whatever it is, It's a bug and needs to be fixed. It seems random for some and not reproduced with links.
    Its been a week and nobody in admin or the Web master has done anything. What's going on...
  18. Replies
    3
    Views
    338

    Your not the only one with Bios issues, many...

    Your not the only one with Bios issues, many regarding USB Flashback via IO rear panel.
    Would you believe i'm still on 0804 original and as i'm having no issues i'm not going to touch it.
    My system...
  19. Replies
    48
    Views
    1,825

    Access Denial

    I've been denied access in response to a thread I wish to contribute to. Other threads I've responded to are no problem.
    The denial notice asked me to contact admin with details of the notice...
  20. Replies
    8
    Views
    1,163

    Hi lorenkos :) Can you access your Bios? If so...

    Hi lorenkos :) Can you access your Bios?
    If so have you tried updating Bios from within Bios using the EZ Flash 3 utility and not as you have done via the rear IO panel.
  21. Replies
    1
    Views
    391

    You are attempting to exceed your RAMs rated...

    You are attempting to exceed your RAMs rated frequency and this is never guaranteed. Although not all 2700X CPUs can reach a 4.2GHz Overclock, many can with the correct cooling and 70C with Vcore at...
  22. Thanks for bringing me up to date on the issue...

    Thanks for bringing me up to date on the issue dandan. It certainly is an annoying issue for those experiencing it.

    Strange how some have issue with the chip and others don't. I agree the chip is...
  23. HI dandan and sorry to hear your problem :( ...

    HI dandan and sorry to hear your problem :(

    First I've heard of the IO chip being unstable. (Please link your source) I have this MB and no problems or crashes of this kind.
    Regarding AIsuite...
  24. Replies
    1
    Views
    157

    YES as per MB specs 1 x M.2 Socket 3, with M...

    YES as per MB specs
    1 x M.2 Socket 3, with M Key, type 2242/2260/2280 storage devices support (SATA & PCIE 3.0 x 2 mode)*4
    1 x M.2 Socket 3, with M key, type 2242/2260/2280 storage devices support...
  25. As you quoted me I felt compelled to answer re...

    As you quoted me I felt compelled to answer re your Opinion.

    First I disagree with your suggestion to RMA the MB unless definitive evidence of failure is found. (A profound inconvenience,...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4