Search:

Type: Posts; User: Godofmosquitoes

Page 1 of 4 1 2 3 4

Search: Search took 0.03 seconds.

  1. I run G.Skill F4-3200C14Q-64GVK with DOCP, which...

    I run G.Skill F4-3200C14Q-64GVK with DOCP, which I can now confirm are completely stable on the Dark Hero motherboard, running my 5950X at stock.
  2. I have now. None of them worked, though. Even...

    I have now. None of them worked, though. Even setting both places as 2T didn't solve the issue. The system still reports 1T in Windows.
  3. I tried changing the BIOS on my card to the Low...

    I tried changing the BIOS on my card to the Low Temperature version, found on MSI's website. This dramatically reduced the heat of my M.2 drives while gaming. The 980 Pro, installed in the lowest 16X...
  4. I have a theory that there might be a slight...

    I have a theory that there might be a slight instability with my RAM when running it at 1T. So I want to try and running it at 2T (which its specifications from G.Skill also rate it as), to see if...
  5. So, I played around with it some. With my 3090...

    So, I played around with it some. With my 3090 spilling 350W inside my case, and also radiating heat, the upper M.2 slot temperatures get too high during stress to my liking.

    In my case, during...
  6. That sounds like a hardware error on the...

    That sounds like a hardware error on the motherboard mate. Sorry :/ Get it replaced.
  7. Crosshair VIII Dark Hero - unable to set RAM Command Rate to 2T

    Hi.

    So, I have a rather strange problem. I load my system with the XMP profile for my RAM, which sets 14-14-14-34 timings. However, it's also supposed to set my RAM with a Command Rate of 2T....
  8. Crosshair VIII Dark Hero M.2 SSD's get really hot?

    So, I have two M.2 SSD's on my Dark Hero board. And they both get super hot during gaming.

    In the upper slot above the graphics card, I have my old Samsung 960 Pro installed, and below the...
  9. The latest bluetooth driver for the Broadcom...

    The latest bluetooth driver for the Broadcom chipset on the R5E Edition 10 is 12.0.1.921. Just saying. Using the driver on ASUS' site is not better. They aren't chosen by ASUS as the "best" drivers....
  10. Replies
    5
    Views
    712

    Hi. You're looking for an m2x3 screw. You can...

    Hi. You're looking for an m2x3 screw. You can usually buy them in bulk for next to nothing. Like, you have to order 25 screws. But it doesn't really cost anything.

    Edit: Only thing you have to be...
  11. As far as I understand it, only certain...

    As far as I understand it, only certain 2000-series cards and the new 3000-series cards include the DSC specification to their DisplayPort implementations. Your 1080 card doesn't support DSC,...
  12. Replies
    32
    Views
    4,504

    I have the same monitor, and I experience no...

    I have the same monitor, and I experience no issues playing at 1000 nits with HDR in games. No flickering, or anything of the sorts. Your panel must be busted. Send it in for RMA.

    Edit: I do...
  13. Replies
    0
    Views
    583

    Microcode 38 for Broadwell-E

    There's a new microcode revision out for 064F01 revision CPU's (Broadwell-E 6950X etc.), which is now version 38. Been out since September. I've baked a version of the R5E10 1903 BIOS with it in, for...
  14. Replies
    17
    Views
    6,740

    Supposedly that they have better security...

    Supposedly that they have better security regarding the various variants of Spectre and Meltdown, and less of a speed penalty for said security, than previous microcodes. I'm _so_ looking forwards to...
  15. Replies
    17
    Views
    6,740

    Or just download AIDA64. Open it, select...

    Or just download AIDA64. Open it, select Motherboard -> CPUID on the left hand side. Under there, the microcode version is written as 'Microcode Update Revision'.
  16. Replies
    17
    Views
    6,740

    Can someone tell what uCode version they use in...

    Can someone tell what uCode version they use in the new BIOS? Latest is 36. At least for 6950X
  17. I solved all mine by throwing in the latest...

    I solved all mine by throwing in the latest microcode for my CPU on the BIOS of my motherboard. No reason not to have the latest, as far as I see it.
  18. Replies
    51
    Views
    25,120

    So, is this the 1902 BIOS for R5E10, or the R5E?...

    So, is this the 1902 BIOS for R5E10, or the R5E? :)

    Also, the microcode listed you have entered as having a date of sometime in 2015? So that would not make it the latest microcode as per The...
  19. Do we know if anything has changed besides the...

    Do we know if anything has changed besides the microcode? I found that the 1902 BIOS with the 31 microcode added, provides smoother in-game performance than this BIOS with the 2E microcode. But that...
  20. Thx. De we know if there are other fixes in 1903,...

    Thx. De we know if there are other fixes in 1903, other than the microcode?
  21. Appears to be working fine :) Excellent.

    Appears to be working fine :) Excellent.
  22. Thx. I'm being told by EZ Flash that it's not a...

    Thx. I'm being told by EZ Flash that it's not a proper BIOS, though. Even though it has the proper name and everything. Must I update it, using the BIOS flashback option?
  23. I see. And the tool then includes the microcode....

    I see. And the tool then includes the microcode. Can u share the BIOS, then? That we might update and use the latest microcode with working OC? It's just strange that Intels own documentation points...
  24. @felix0751 - and what motherboard are you using,...

    @felix0751 - and what motherboard are you using, with what BIOS?
  25. OC works fine for me, with my 6950X on Win10...

    OC works fine for me, with my 6950X on Win10 1809. But not if combined with the KB4465065 microcode update issued by Microsoft, which updgrades the microcode to 2E. However - KB4465065 doesn't...
Results 1 to 25 of 76
Page 1 of 4 1 2 3 4