Search:

Type: Posts; User: rstolpe1988

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Replies
    0
    Views
    311

    AI Suites 3 overclock during install

    Hi,
    I just want the AI Suite 3 for the FAN controls and nothing else but it do seem that AI Suite 3 are overclocking by it self.
    It sets CPU on Optimized aldo I have it on Intel default in BIOS.
    ...
  2. No need to clean the old ones? Just install this...

    No need to clean the old ones? Just install this ones over the old ones?
  3. Replies
    623
    Views
    109,772

    The big Q for me is if the m2 ports are going to...

    The big Q for me is if the m2 ports are going to support pcie4?
  4. Replies
    0
    Views
    216

    REQ ramp up delay for fans in BIOS

    Hi,
    I would love to have some function in the BIOS for the fans that I can set a time limit for the ramp up and down.
    For example; don't ramp up fans if the temperature are not over 50c for more...
  5. Have I damage the motherboard? Connected my pwm hub wrong.

    Hi,
    I did troubleshoot all day why my fans that was connected to the PWM hub was working but the BIOS did not show any RPM.
    So then I was looking at the PWM hub and I did discover that I had...
  6. Replies
    7
    Views
    559

    this did solve my issue. Thanks.*

    this did solve my issue. Thanks.*
  7. Replies
    69
    Views
    23,701

    I can bee wrong but arent the FW stored in the...

    I can bee wrong but arent the FW stored in the Motherboard/chipset and not in Windows?
  8. The 970 Evo Plus don't need driver either they...

    The 970 Evo Plus don't need driver either they can also use Microsofts own drivers as 980 does.
  9. Yes, the 1003 are the latest. Update that trough...

    Yes, the 1003 are the latest. Update that trough EZ Flash and then update the ME Firmware don't matter which order you do it in.
  10. What nvme ports are recommended? What ports are chipset/cpu?

    Hi,
    I'm going to change from 3 nvme disks to 2 and I'm wondering what ports are recommended?
    I was thinking of using M2_1 for the C: disk as it's just above the GPU and that's because I'll most...
  11. Replies
    7
    Views
    559

    Hi again, I have now the 1003 BIOS and the...

    Hi again,
    I have now the 1003 BIOS and the settings you told me. I have runned memtest86 for 12h and it could not find any issues so I'm guessing XMP 2 is OK.
    I'll now try to run my system for some...
  12. I’m recommending to update bios as it’s has...

    I’m recommending to update bios as it’s has new microcode and the BAR function etc.
  13. Replies
    7
    Views
    559

    Ok, I have it on XMP 2 now but with 0901 and...

    Ok, I have it on XMP 2 now but with 0901 and running memtest86 during night. Im off to work so I cant upgrade bios to 1003 until tomorrow.
    Running 10 passes with memtest86.

    Whats the difference...
  14. Replies
    7
    Views
    559

    Hi again, Here is my story. First I did have...

    Hi again,
    Here is my story.

    First I did have 10900k with a MSI meg z490 Ace and it was toughing WHEA errors randomly exactly the same that I did get above with the 1003 BIOS.
    So Intel did...
  15. Replies
    7
    Views
    559

    MCE decoder for WHEA error?

    Hi,
    My guess is that the WHEA error are because of the latest bios 1003 as it did appear some day after I did update the bios.
    I have rolled back to 0901 but as I did have this WHEA issue before I...
  16. Replies
    23
    Views
    166,977

    Sticky: Quastion; can XMP break the CPU? I don't think so...

    Quastion; can XMP break the CPU? I don't think so after everything I have been reading but just wondering.
  17. Well it depends, depends on the bugs or what ever...

    Well it depends, depends on the bugs or what ever the driver are fixing.
    The installation of the drivers are not hard to do. Click on a file and then after installation reboot the computer all done.
  18. Replies
    79
    Views
    13,164

    Hi, I have 10900k with the ROG MAXIMUS XII HERO...

    Hi,
    I have 10900k with the ROG MAXIMUS XII HERO and G.Skill 3200MHz 32G (F4-3200C14D-32GTZN) everything is on Intel Default beside that I have activated the XMP 1 and when I did update to the 1003 I...
  19. I did take a look and the bios version that I did...

    I did take a look and the bios version that I did use before the WHEA errors is the 0901 and not 0804 I did confirmed it now as in the 0804 you can’t change the fan curve after 75c in the...
  20. Ok I see, so what I need to do is to rollback to...

    Ok I see, so what I need to do is to rollback to 804 to fix the issue? I don't want to manually adjust the voltages to the vcore etc. I'm to old for it I just want to run everything as I use to do...
  21. I did find even more issues in the Event Viewer:...

    I did find even more issues in the Event Viewer:
    : The embedded controller (EC) returned data when none was requested. The BIOS might be trying to access the EC without synchronizing with the...
  22. ROG MAXIMUS XII HERO (WI-FI) BIOS 1003 WHEA errors

    Hi,
    I did update yesterday to the new BIOS version 1003 and now today I did get a WHEA error.

    A corrected hardware error has occurred.

    Reported by component: Processor Core
    Error Source:...
  23. Replies
    3
    Views
    396

    Do I need to reset BIOS after update?

    Hi,
    I'm thinking of updating to the latest BIOS for the ROG MAXIMUS XII HERO, what I'm wondering is:
    Should I reset (cmos resett) BIOS to default and re-apply all of my settings after updating BIOS...
  24. Well it's up to you, I prefer the latest drivers....

    Well it's up to you, I prefer the latest drivers. Now WIndows has released the latest October update so if your up to date with windows I should update to the latest drivers also.
  25. The latest chipset working fine on ROG MAXIMUS...

    The latest chipset working fine on ROG MAXIMUS XII HERO (WI-FI) - for anyone who wondering.
Results 1 to 25 of 28
Page 1 of 2 1 2