Search:

Type: Posts; User: LordofPressure

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. why i must start the system on VII Hero with "Start"Button on Motherboard today ?

    hello peoples.

    Everytime, when i start the pc to set up windows or linux, i push the button on my rack (tower) to shut up.

    today, 15 minutes ago, i push it, but nothing happens. then i look on...
  2. hi , all. i don't use this forum for a long time...

    hi , all.
    i don't use this forum for a long time , i know.
    weeks ago i have updated the bios from 2902 to newest version 3103 , the clock issue is in the same frozen state that stay behind. after...
  3. back , i know, that i will never make...

    back ,
    i know, that i will never make bios-updates again, update from 2201 to 2902 done.
    a non acceptable defect occurs, because both ssd's fallen in frozen-state during update. it is the most...
  4. thanks Nate152 for your answer i don't want...

    thanks Nate152 for your answer

    i don't want rename the bios-file , but i must do it. i don't know which effects it is. when i do first update the bios from v.1002 to v.2201 , i let the file...
  5. an additional question: what is the reason to...

    an additional question:
    what is the reason to rename the downloaded bios-file (to m7h.cap) ? i don't find any declarations on asus about it.
  6. BIOS time-clock stays behind and mouse not work in bios. whats wrong?

    hello guys

    bios time clock stays behind --> after two or three days , a look in bios ,the time clock is 2-3 hours behind the actually time.
    i set it correct , days later it's the same.
    ...
  7. hello MaccieD Loosing some BIOS settings is the...

    hello MaccieD
    Loosing some BIOS settings is the reason that at first: CMOS battery is empty (change it) or second : your power supply 750w is at limit.

    look at my SPECS. i have the same cpu ,...
  8. Replies
    14
    Views
    5,427

    hello chris46319 sorry for my interfering here ,...

    hello chris46319
    sorry for my interfering here , but i must tell you the follow important thing. i have read all posts.

    chris --> for the future : when you change the power supply by a new one...
  9. Replies
    21
    Views
    6,402

    chinoph ---> Nate152 and kkn have good answers ....

    chinoph ---> Nate152 and kkn have good answers . make their suggestions .

    the only way to rule out the WD20EZRX-drive as troublemaker , you must test the drive by an other PC. the other way is to...
  10. Replies
    21
    Views
    6,402

    hello chinoph, i have the same mainboard and cpu...

    hello chinoph,
    i have the same mainboard and cpu , looking at my PC Specs.
    Bios update done? actually version? HDD-drive connected correctly , SATA and power?
    After Bios update , its better you...
  11. hello michele.miele1991 please listen and read...

    hello michele.miele1991

    please listen and read the posts from Natel52 and MeanMachine.
    Maximus VII Hero with I7-4790K (i have the same components too) don't support Quad-Channel. Ever higher the...
  12. thanks to chino and puffnstuff for your reply :)...

    thanks to chino and puffnstuff for your reply :)

    YES , my system works without any complaints , i have never seen any mistakes or instable facts. i control the stable state by running the 3DMark...
  13. i'm completely unsure to change to new bios, it runs to my happiness.should make it?

    hello all.

    i have at this time bios version 2201 on VII Hero.

    no problems with hardware or other issues, it looks like that all components are working for my satisfaction. i know also that you...
  14. hello digmeahole1 and all other users, :rolleyes:...

    hello digmeahole1 and all other users, :rolleyes:
    you have an vii formula mobo , i have vii hero (you can see in my specs).
    is this valid to set it on my mobo? i has never looked at this. my...
  15. Natel52, no problem :) my saved specs in...

    Natel52,
    no problem :)
    my saved specs in profile is a little bit confusing in the "graphic card" line. I have changed it now , that in future is no cluttering for the other users.
    windforce 3x...
  16. Hello Natel52, thxs I have never had two or...

    Hello Natel52, thxs
    I have never had two or three grafic-cards, its too expensive for me to buy 2 or 3 peaces of GTX 770. when you look at my saved specification on my
    profile you can see only one...
  17. i'm back after long time and send greetings to...

    i'm back after long time and send greetings to all.
    News: i have changed cpu cooler --> enermax liqmax ii 240 , while cpu would be to hot for me.
    the problem of shut down is actually present at...
  18. Replies
    2
    Views
    2,989

    hi pipodi. a question: wich mobo you have? i...

    hi pipodi.
    a question: wich mobo you have? i have max vii hero mobo.
    when i want to use onboard grafic (hdmi, vga , on back-panel) , i must switch first in the BIOS in grafic configuration from...
  19. Replies
    2
    Views
    2,414

    dear dgingeri , i think it's not a hardware...

    dear dgingeri ,
    i think it's not a hardware issue , because i have read about windows 10 that a difference has been between windows 10 and previously operation systems.
    for exemple windows 8 and...
  20. welcome 13ucci, You can see my hardware in Specs...

    welcome 13ucci,
    You can see my hardware in Specs unter my username.
    thema SSD: it's not a good way to reconnect SSD's to connect to other pc's or motherboards after installing an operation system,...
  21. Replies
    21
    Views
    11,485

    hi CdrMittens, Power supply with 850W and your...

    hi CdrMittens,
    Power supply with 850W and your haveing system-components ,that you have written on the top of this thread, is enough, i'm sure. i have only 750W
    with a stronger and power hungry...
  22. Replies
    21
    Views
    11,485

    hello CdrMittens, He (MeanMachine) is correct in...

    hello CdrMittens,
    He (MeanMachine) is correct in saying about different DIMM manufactors can make problems. Asus Maximus VII Hero Mainboard is very delicate of this.
    It's better you look on...
  23. Replies
    21
    Views
    11,485

    hi CdrMittens, I have the same Board VII Hero...

    hi CdrMittens,
    I have the same Board VII Hero and the same CPU i7-4790K, but other DIMM's , SSD and grafic-card. I had an shut-down-crash during an test ,but not so extreme.
    you can see in my PC...
  24. Thxs NemesisChild for your fast reply,...

    Thxs NemesisChild for your fast reply,
    OC-settings never be made, because the i7-4790K runs on normaly mode with 4Ghz default and 4,4Ghz Turbo Boost, CPU drives between 800 Mhz and
    4000 Mhz, in...
  25. hi menthol and nemesischild , THXS! News: i have...

    hi menthol and nemesischild , THXS!
    News: i have let the RAM at XMP (2133 mhz) and done the memtest86+ with two Passes, Result= no errors , by 2 Passes. =RAM is good.
    befor i make the next steps:...
Results 1 to 25 of 30
Page 1 of 2 1 2