Search:

Same microcode for 79 and 99 series ;)

The last microcode for Cascade Lake-X it's 3101 (3006 for Skylake-X)

VCCIO and VCCSA affect the memory OC ;)

If the TJMax is the same, the heating must come from another side ;)

You're welcome ;)

the latest available ;)

The 901 bios with the last update (used it and no problem)

https://drive.google.com/file/d/1ONXfdhqf1giXjMd-lo_-LTHqZdTfQFqj/

That's it, but use the latest version of "UBU" you will have the latest version for the" network " ;)

Since the 901, I use the latest microcode (3003), except with Cinebench, I have no difference in performance with my use (soft, SSD performance, etc ... as was the case a few years ago time)

;)

I use mine ;)

I tested the 3003 microcode, and apart from the loss with Cinebench, it's almost the same for the sotf I use, I'll stick with this one

Ah ok, I misunderstood

Thanks

Ok thanks ;)

I wasn't paying attention, but your CPU heats up less with this microcode ?

Ah yes for the CPU score, if you could increase the OC :D

Thanks for your feedbacks ;)

I would test with the software I use, etc ... see the performance of this 3003
For Cinebench, it's a bench to forget with the latest microcode I have the impression
...

Ok thanks

bogsha bios has microcode 3003
This bios and microcode 29 would not work "together"... :confused:

You confirm that with the microcode 3003, the performance is still lower compared to...

the bios i posted, doesn't work for you too?


Yes that's it

I tested the 0901 bios with firmware 29, it does not boot with my RAM settings (code: BD)
No worries with the 702, back to this one

I have not tested the 3003 microcode, but it has been tested,...

the 901 does not have the 3003 microcode, by default
I modded it, if anyone wants to test

https://drive.google.com/file/d/1AKzmvwtkbluMlpjhqhCtiN2bBiBNdQlb

someone tried the latest microcode (3003) for CascadeLake-X, see if the performance is still dropping ?

When the PSU was OFF, there are double boot
No more present in Extreme, Omega

@shamino

could you remove the dual boot (when PSU was off) ?
And fix the voltage bug between the AB and CD channels ?

Thanks so much

Hello

What is this "rebar" option ?

Thanks

EDIT: Ah this is for the Nvidia RTX3000 card (and AMD card maybe) ?

You want 3201 R6A bios with 49 microcode (for Skylake-X) ?

I only find version 12.19.0.10 on the MS catalog

I have the same problem
I will send it back, for this problem and for the IPS glow which is too present