Search:

X.M.P. is an easy one click way to set your memory to its rated specs. Since you're setting the ram manually, you don't need to enable X.M.P.

Once you get cpu temps under control, on the extreme...

Hey toronto699

When I click on the link you provided, it's saying it's not secure.

Click the pic to make it bigger
87858

Hi hawkhandler

Have you renamed the bios file to SZ490E.CAP

This should get it to read as a proper bios file.

Hi psoutrage39



In theory it should be ok, you get 75 watts from the pcie x16 slot and 150 watts from the 8-pin pcie cable which = 225 watts.

But.... I personally would use two separate...

Sorry for the late reply.

The update is for Strix 1070's with Micron memory, it helps with Micron memory stability and overclocking. All later ROG Strix 1070's should have the latest Vbios update....

Sorry for the late reply, I went on a trip and was there longer than I planned.

All right, no big deal about posting screenshots, only thing I can say is keep trying, it should work as .png's are...

If you used thermal paste between the die and IHS, this won't give as good of results as liquid metal. However, 72c is a good temp.

I see you have 16GB Crucial Elite, is it running at its rated...

Hi charliep17

Check in the Nvidia control panel Vertical Sync is set to "Use the 3d Application Setting", then in the game settings check that Vertical Sync is set to off. This should put gpu...

Nice !

You now have one of if not the best cpu air coolers you can get. Did you use liquid metal between the die and IHS?

CPU temp looks good and says you can shoot for a higher overclock,...

Hi OohDreamWeaver

I have the i7-7700k overclocked to 5.2GHz, I delidded it and used Thermal Grizzly Conductonaut between the die and IHS and used Thermal Grizzly Kryonaut between the IHS and water...

Hi Howie411

All I do after a windows 10 install is update the graphics driver (which for me is Nvidia) and install the audio driver.

Anything else is pretty much optional.

Install the...

Hi rstolpe1988

The bios automatically resets after a bios update, you'll have to reenter all your settings.

It's a safe bet the ram will work.

I personally like to use the ram manufacturers QVL.

Hi 4m4nkumar

The RTX 2060 super is last generation and at $721.58 u.s. dollars, that's too much when you can get an RTX 3080 for $699.99 u.s. dollars, that is if you can find one.
...

Hi V-444

I just checked on the Crucial site, it says your ram kit is 100% compatible.

You're welcome,

Give us an update when you get your new motherboard.

Thank you for all the info.

You have a super nice pc, would like to see you get it working properly.

It looks like you are using an HDMI cable? What happens if you try a displayport cable?

Hi SmokeyKilla

I see you have G.Skill Trident Z which should be Samsung B-Die Memory, double check your kit to make sure it is. If it is Samsung B-Die, you can safely up the Dram voltage to 1.50v....

If they work fine on your Rampage V motherboard, three things cross my mind.

1) Configuration - I'm not familiar with the Rampage boards but there could be a setting causing performance issues.
...

Hi Stylee

I agree with more headroom, this = cooler and quieter.

To be honest, I've never used a voltage meter for overclocking as there is no need for one. Hwinfo tells me all the voltages I need to know for overclocking.

I have the 7700k overclocked to...

cpu_opt is a slave of the cpu fan header, It will run the same rpm as the cpu fan header. Connect your cpu cooler fans to cpu fan and cpu_opt, or if using a splitter connect them both to the cpu fan...

Hi pa2806n

When running SLI, I always install both cards, connect the bridge, then install the Nvidia driver.

I'm using two older Titan Xp's in SLI and they are working fine.

Hi Juschi

It's been a while since I've used this program and yours is in German, does clicking " RPM Fix-Modus " allow lower fan speeds?

Cpu fan is showing 201rpm
Cpu_Opt is showing 185rpm...

Hi CoachHines

My motherboard doesn't have probelt but.....

It's not necessary to go to extreme for voltage monitoring, I personally use Hwinfo for clock speed, temp, and voltage monitoring.
...