Search:

Hello

Check the CPU socket for bent or damaged pins. Also be sure the cooler/water block is properly tightened when reinstalled.

Hello

LLC is for VCCIN not VCORE. There will be not type of chart for these voltages as Intel programs the VID tables per the requirement of each individual CPU.

Hello

Taking into consideration the slight variance because of bit resolution and impedance TurboV is pretty much dead on compared to actual voltage here. Of course the exception is VCORE if using...

Hello

This is a non-issue. The ASUS EZ Installer for Win 7 is available in the utilities section of the Win10 drivers. This is the only driver/utility required for installing Win7. The listed...

Hello

The contact layout is secondary to the issue of this thread. This issue was solved as noted in the post above yours by replacing the faulty graphics card. If you are having an issue with...

Hello

Move the whining to the General Discussion section of the forum or if a specific open case or RMA issue post in the Service Related Inquiries section. Thread closed.

Hello

Memtest is pretty much useless with today's platforms. Better testing would be employing HCI or GSAT to weed out memory issues. I see no problems using Photoshop with 0702 so memory...

Hello

Will be up and running in the next couple of days. :)



66737

Threads merged

Hello

XMP does not and has never set all memory timings. If you have memory that is not capable of the optimization 0503 provide flash to 0031. that is why it was released.

Hello

Why is that? 96 Ohm or greater impedance will have absolutely no detrimental effect other than affecting stability if that chosen setting is not correct.

Hello


There is a misprint in the manual for the STRIX X299-E GAMING regarding USB BIOS Flashback. The correct USB port is the bottom port (closest to the board) next to the BIOS Flashback...

Hello

It seems some of the non-primary timings have been tightened for better performance. Manually setting these timings should allow mainstream memory to run at rated speed. Premium memory...

Hello

Looks up-to-date to me.



66075

Hello

THe 3600C15 GTZ 16GB kits can do 3600MHz at their rated timings and speed. In fact they are capable of 14-14-14 1T at 3600MHz.
...

Hello

While using 2 8GB density modules instead of 4 will result in a better chance of 3600MHz memory speed this speed is a pipe dream for most if stability and reliability is a requirement. This...

Hello

One thread concerning this is plenty.

https://rog.asus.com/forum/showthread.php?94322-X299-VRM-Disaster-(overheat)

Hello

The BIOS versions in this thread are for the non-WiFi C6H. Fortunately the board will not allow flashing an incorrect BIOS.

Hello

The OP is wanting 32GB at 3200MHz plug n' play. There is no memory kit guaranteed to meet those demands.

Hello

XMP is an Intel memory specification which AMD has not stated they have embraced. Anyone thinking that XMP would be plug 'n play on an AMD platform and then whining because the results are...

Hello

There does not seem to be anything wrong with your English. In fact this post confirms the takeaway I got from your initial post. Both the Flare X and FORTIS 2 x 16GB 2400MHz kits are...

Hello

These two sentences seem to be at odds with each other. First you state overclocked memory is a necessity for your usage requirements then comment about not being experienced in overclocking...

Hello

The memory is being mapped for non-use do to instability and the resultant training failure. The BIOS flashing will not be an issue if clearing the BIOS before the flash as should always be...

Thread closed. Any further disrespectful posts will result in the loss of posting privileges.

Hello

I have used several different sets of memory both 8GB and 16GB density modules. Although I have found stability with ODT values ranging from 34.3 through 96 Ohms I don't believe I have ever...