Search:

Type: Posts; User: nyxagamemnon

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Replies
    17
    Views
    3,217

    1403 is indeed worse than 1304. What I don't get...

    1403 is indeed worse than 1304. What I don't get is what are they doing... Supposed to be fixed and improvements but yet the new versions seem to be heading in the wrong direction.
  2. Seems like you guys have better luck than me...

    Seems like you guys have better luck than me running 2 6000 C36 (Samsung) kits best I can get out of it is 5200 with 4 sticks. I was able to boot 5400 but it wasn't stable. The issue is there's so...
  3. That's good you managed to get it stable but I'm...

    That's good you managed to get it stable but I'm having issues myself as well but not on an Apex rather an Extreme what was once stable now isn't. Been trying everything and it's really annoying but...
  4. Zenith II Extreme Alpha NVME Drive Slowdowns Not on all drives.. Any Insight? Read on

    Would appreciate some insight into this strange issue I'm having. Let me explain. So my PC currently a 3970X 128GB DDR4 3200C14 (Samsung B Die Gskill kit) on a ZIIEA, Will work just fine won't get...
  5. Zenith II Extreme Alpha AMD Chipset Drivers, Phison Based NVMe Drrives Dimm.2 Issues

    Well where to begin.

    Running a 3970X on a ZIIEA with 128GB Of CL3200 Samsung Bdie Gskill CL14 memory on W11. So anyone have any idea's or what's going on I'll begin to describe the behaviors.
    ...
  6. I've got two boards both with reversed caps. I...

    I've got two boards both with reversed caps. I mean how long does it take you Asus to grab boards off your stock or production check or just simply put the cap on the opposite direction as all of...
  7. XG279AQM Slow to wake up from sleep (Screen refreshes twice waking up from sleep)

    So my primary issue is that the monitors don't instant turn back on instead they turn on for a second then go black and then come back again. Anyway to fix this? I'm using 3 of them and they all do...
  8. I have the same exact issue but it's limited to a...

    I have the same exact issue but it's limited to a single m.2 drive.
  9. 2x 2080TI Water cooled (Custom loop), They...

    2x 2080TI Water cooled (Custom loop), They usually stay in the 40-50C range (depending on ambient)
  10. Well I mean the NVME drive is sandwiched between...

    Well I mean the NVME drive is sandwiched between the Case and motherboard since it's in the back of the board. It runs 50-60C it's a WD SN720 2TB I didn't want to put a gen 4 drive behind it rest are...
  11. I barley managed to get a finger in there it's...

    I barley managed to get a finger in there it's between (two gpu's). given the fact there's a seperate finned heatsink under the cover plate what would pushing it down accomplish? Your thinking if...
  12. If I boot up and go into the bios within a few...

    If I boot up and go into the bios within a few seconds the pch temp is 60c and climbing. However if I point an ir gun at the chipset fan or five the temp is nowhere near 60c .

    The system is...
  13. The temp is from the sensor. no there isn't a fan...

    The temp is from the sensor. no there isn't a fan pointed over the chip set other than the fan from the motherboard. Case is an open air design.
  14. Zenith II Extreme Alpha Chipset Temp 80-90C All the time?

    Is this temp a worry? everything works fine but I have all m.2 slots occupied the Dimm.2 2 GPU's and all PCIE slots used. Fan is constantly running Ambients are up since it's summer hovers 25-30C...
  15. Am I going to be wasting my time with the Dominus? All the Code 00 Issues

    Well I'm doing a new build and I have this monster of a board sitting here and I'm in the process of getting all the parts together already have the 928 and while going through and doing some...
  16. I've already set high Level of LLC doesn't do...

    I've already set high Level of LLC doesn't do anything when it's on adaptive or offset = fail. IT's not the gpu the gpu isn't under any load when compiling. and I can clearly hear the sound from the...
  17. Rampage VI Extreme Omega Adaptive /Offset Voltage issue

    First let me say that the VRM stays cool even using a 18 core chip haha that's really great the fan doesn't even spin up while compiling. But there are some issues.


    Setup
    7980XE OC'ed to...
  18. I can adjust the curve from F7 EZ mode and it...

    I can adjust the curve from F7 EZ mode and it will work but the curve isn't the same in AI suite won't go below 11%. BTW guys the auto fan tuning is the stupidest thing ever I hate it. I just want...
  19. 1. Header is in place no issue 2. IN the bios I...

    1. Header is in place no issue
    2. IN the bios I can goto ez mode set to 0 fans will turn off works as normal.
    3. In AI Suite fans don't go below 11% Bios it goes to 0. I have the only version...
  20. 1. 504 2. I'll place them on auto and. Reply...

    1. 504
    2. I'll place them on auto and. Reply back.
    3.i can adjust the fan curve just fine but it won't t let me go below 11% . I can go 11-100. That is in aisuite.
  21. Rampage VI Omega VRM Fans NOt turning off Despite below 60C VRM Temps!

    Does anyone know how to get these little fans to turn off? VRM is 45C and they are still on and even in the bios when I set to 0 RPM it doesn't work along with the temp limits!!!!

    They are...
  22. Replies
    103
    Views
    48,567

    Initially I didn't have any issues but yesterday...

    Initially I didn't have any issues but yesterday when I Shutdown my rig (using Rampage VI Extreme) The ROG center logo and chip set light were on. So I turned off the power completely to get them to...
  23. Replies
    157
    Views
    27,197

    Awesome thanks !

    Awesome thanks !
  24. Replies
    157
    Views
    27,197

    Can you share the modded bios your using ?

    Can you share the modded bios your using ?
  25. Replies
    48
    Views
    12,603

    Can someone test 1301 vs 1004 to see what the...

    Can someone test 1301 vs 1004 to see what the loss in performance is?

    In crystal/assd?
Results 1 to 25 of 34
Page 1 of 2 1 2