Search:

Hello, If not wanting to tune the system manually it's best to stay on a UEFI build that works best for your CPU sample and memory kit, unless there's desired functionality shown in release notes.

Hello, on the EZ Menu when entering the UEFI (F7) check the top right of the screen. There should be a drop down to enabled REBAR. Once that is active simply check it is working in the OS.

This...

Hello,

Check for even mounting pressure when mounting. However, due to how Ryzen parks cores, idle temps are higher than what some might consider "normal". If the CPU is within operating range...

Hello,

Have you tried actually installing the drivers from the support page?

The Velocity 2 is definitely a step up from EK's usual / classic look. Great build!


93752

DIMM.2 module should work cross platform, yes. Although I haven't tried personally.

Some kits are four modules. Not sure what this post is meant to allude to (or what it has to do with combining memory kits).

In the event the kit had 4 modules, but it doesn't. Memory kits are binned for overclocking in the density they are sold in. Neither the memory vendor nor motherboard manufacturers guarantee any kind...

More voltage in place of higher LCC is always preferable to reduce sustained current, however, if settings are stable and temperatures are in check Use the system as intended.

Hello,

See pinned article.
...

The 32GB modules will be DR

Because 128GB is supported. When applying XMP you're attempting to run the kit(s) at 5200MHz, this is out of Intel spec and is classed as overclocking. Not only that, you're combining the kits, so...

Yes, XMP is overclocking so disabling this is troubleshooting 101

Hello,

The Strix LC is interchangeable with any 4 pin PWN fan. Here are some of my own results using the default ROG RGB setup. In some instances, the card was able to maintain 2290MHz. *

The...

Combining kits isn’t supported by the memory or motherboard vendor. Memory kits are binned in the density in which they are sold in. Remove one kit and retest XMP settings.

Hello,

Sorry, we were all under the assumption you were still troubleshooting. Glad the GPU resolved it for you.

Hello,

Could you please at least state which memory kit?

The board supports 128GB no problem. Where users come unstuck is usually either by combining memory kits, or have the mindset that...

Hello,

The release notes only include changes for DRAM stability. If you were stable on the previous build there's little reason to update.

Memory and voltage rules may update universally but...

Hello,

As this thread is being responded to in ROG Care I will now lock this.

Hello,

Please remove any overclocking from the systems including memory XMP profile and report back if the problem is still present.

Hello,

Set power target to 93% and see if the problem reoccurs, then report back

3 short beeps indicates a memory initialisation error, which is why support probably told you it was memory.


Remove XMP and any overclocking, if the problem still persists, remove the CPU and...

I also run hard-line so can appreciate it's not ideal when needing to troubleshoot these things, there's always a trade off. If reseating the CPU resulted in more memory being detected it would...

Hello,

Remove any overclocking including XMP profile


Reseat the CPU cooler and CPU and report back.

Remove the CPU cooler and CPU whilst checking for bent pins, then reattach cooler whilst making sure mounting pressure is even.