Search:

You can run prime95 with custom large FFTs to emulate a gaming load, normal Prime95 settings are OP but offer a good way to really push an OC to the brink so you know for sure it is stable. Add...

DRAM can be up to 1.5 for B-die from Samsung or 1.45v for Micron E-die. Your VCCIO and VCCSA should never exceed 1.3v or you might damage your CPU/mobo traces when using it 24/7. Check if MRC Fast...

Finished another guide to cover DDR4 overclocking links below include the AMP link for mobile.

DDR4 Overclocking guide:...

They should take some of the marketing money and put it in support and software, that stuff will pay for itself via feedback, reviews and customer buzz online.

Voltage readout is software wise always unreliable and could be different. LLC only can get involved when you can set it in the BIOS for the ringbus. And on my Hero XI i can't

Temp difference is usually a bad thermal paste appliance, in some case a bad mounting of any cooling solution. Ever rarely the TIM, but the paste used by Intel is bird **** that is supposed to last...

One way of finding out timings is setting them to auto and then setting the DRAM voltage and the clock speed to your desire if it will even boot at all you will have it with very lose timings then...

Boot into the BIOS and reset the hardware settings there.

Might be a long shot but I watch this guy on YT he makes custom reservoirs and I think also blocks: https://www.youtube.com/channel/UC3MinCakmhnh9CJUh-TzNRw

Boot into the BIOS ad just reset your PC hardware to default. If BSOD persist check the C drive for errors.

If you are not using LM between the chip ad IHC that might help increase the temps a bit. It is recommended to replace the LM after the 1st year and then you should be good till the next upgrade....

Well, you can lap the IHC or get a copper(would be lapped) one that should help and then go Noctua dual 140MM on air. The ML fans are great but not the best for rads or tower fins if you want to most...

In BIOS settings go to fan profile for the header you are using since booting it will use the BIOS fan curve not the one set in software.

Run --> services.msc --> lightningservice --> right click --> Restart

AI OC is always a bit unoptimized, you can try a manual OC but save the settings you currently have to a profile. What also might help is adjust the LLC level, LLC6 is most commonly used.

While I do not own that CPU I have overclocked several Ryzen CPU's and if you want to get the most out of them you want to tweak some BIOS settings like Digi+ VRM and AMD CBS to get the most out of...

New guide for the AMD 2200G also will be helpful for the 2400G covers overclocking the CPU and Vega GPU. Only had an X370 Strix so somewhat overkill for that CPU series but works none the less. Also...

Uninstall the ROG keyboard stuff make sure to save your profiles somewhere in My Documents if it has any and then use CCleaner to clear out the registry. Reboot and install the ROG software.

Last time I ran into problems and I run Aura/iCue/RGB Sync with TridentZ I removed all the software in terms of RGB, Aura, AURA Service, iCue, GALAX GAMER RGB/Patriot Viper RGB, use CCleaner to clean...

win key + x --> run --> type: services.msc --> scroll down and look for LightningService --> restart or stop and start

Most of the time this portion of Aura is acting up i also at times use the...

IA AC/IA DC Load Line is useful when using adaptive vcore adjustments prevents highs and lows volts in the override by the Intel VID control does not affect manual voltage adjustments best setting...

The ROG Ryujin 240 or 360 but I also used the H150i Pro from Corsair they work like clockwork.

The GPU might be clogged with dust buy a can of air and clear out the fins on the cooling plate if you have some experience I would replace the thermal paste of the GPU and replace the thermal pads...

Aye m8 we need to know what CPU, Motherboard you are using at least but like a full list would be even better.

Hello, I suddenly have a slide show when trying to game the Witcher 3 runs @ about 10 fps, Heaven benchmark and 3d Mark Time spy run also @ 10 FPS due to the clock being stuck @ 200mhz ish.

The...