Search:

9900k @ 5Ghz......32 GB 3200 Mhz Dominator Platinums...MXIE.... 1080Ti SLI @ 2050 Mhz....

Timespy 18,252
https://www.3dmark.com/spy/11821473

Presently using Adaptive 1.37v LLC 6 ....5.1 Ghz / Uncore (Cache) 4.8Ghz ...under stress load 1.314v - 1.34v......stable thru numerous Stress Tests.....
2 x 16G Corsair Platinums @ 3200 Mhz

Very good points...AND 4133 Mhz RAAM is really pushing it......stick to 3200 - 3600 Mhz.....

Play with your Adaptive Voltage until you get it...it may not ive completely to what you set in Manual...personally I like my Chip to downclock both Frequency and Voltage...so I dont bother wioth...

System Agent is the voltage right under VCCIO....or above it..cant remeber ...

Ensure your AIO Pump connector is plugged into the CPU Fan Header.

Theres a ton of information including OC'ing Guides.....Google it and you'll find a ton of em (including Youtube OC'ing Guides)....

Yeah Ive heard some say to disable MCE for OC'ing.....I presently have it disables but all of my Cores are boosting to 5 Ghz....thanks Arnie!!!

My Chip would get thru most all Stability Testing 5Ghz 1.285v Adaptive LLC 5.....load voltage 1.22v ...BUT would not get thur an hour or so of P95 (No AVX)....once I increased LLC to 6 I got thru a...

See my EDIT to my post above guys...

What I can try is uninstalling Samsung Magician......
...the only other things running (always running) is MSI Afterburner...my GPU's are downclocking (both frequency and Clocks) normally...

If I...

I've got Samsung Magician installed but they're stand along App ......"Rapid Mode" is disabled on all SSD's in Magician....although I did try one of my 860 Pros with it enabled....but since put it...

Yes I have CPU set in Windows to Balanced Mode with Minimum CPU state at 5% (default I believe).

All the Power Saving stuff is enabled in BIOS.....I also went in and tried Offset Voltage mode vs...

So I'm using Adaptive Mode (1.285v LLC 6) .....ran a ton of stress tests yesterday with a final 12 Hr P95 Blend run.
All Cores 5 Ghz / Cache Ratio 4.7 Ghz

Under load my vCore is between 1.270v -...

Try both Realbench for 15 min or P95 Small FTT for 1 Hr.......report back your temps ....guarenteed you'll be well beyond 67c !!!

I hit 80c stress testing my 5 Ghz OC with a Custom Loop using 480*360*240 Radiators.....if youre only hitting 67c Max with a 240 AIO you arent stress testing properly ;)

There is no listing for a 32GB (2X16) F4-3200C 16Q-32GTZRX on the MB QVL so they have not been tested. Not to say they will not work however rather demanding on the IMC.

As they are OC RAM (and if...

^^^^ Good stuff...they made it right!!!

Im presently Adaptive 1.285v w LLC 6 (no AVX Offset) and no Voltage Offset.....into 7 Hrs of P95 Blend ...temps are warm considering a Custom Loop...P95 latest with AVX disabled

Under Full load...

The key to voltage are what VID is.....what you set in BIOS...what desktop idle is and what 100% Load is.....write these numbers down and play with adjusting settings and Loadline...

Thanks for that helpful link.....tested with just SPDF Optical and couldnt detect 5.1 Ch ........so unplugged that Optical Digital Cable and went with the cable that came with Z906 System...retested...

Hey folks...just connected my Z906 Surround System to my MXI E via SPDF Optical Cable (vs the included separate Audio Jack) ...will Digital Audio input still produce 5.1 Ch Surround Sound?

Cheers

As someone pointed out before.....biggest advantage to 2 separate loops is the ability to swap out GPU's leaving CPU loop unaffected....

[/QUOTE]


OC'ing 101 ......all chips are slightly different...(Memory maybe different)........one persons settings wont necessarily work on someone else's system....use the above as a "Guide"...

Ive always ran a a single loop / single pump w 480*360*240 Rads with SLi.....no issues and great temps:

Presently 9900K @ 5 - 5.1 Ghz (EK Velocity) and SLi 1080Ti's (FC EKWB) w single D5 Vario /...

No worries.....been using Corsair Doms for the last 3 builds X58...X79 and now this Z390....started using them and continue to use em as I've never had an issue with them...whether it be failing or...