Search:

Type: Posts; User: BenchAndGames

Page 1 of 2 1 2

Search: Search took 0.00 seconds; generated 51834 minute(s) ago.

  1. I dont think so !! Im sure the memory is bad,...

    I dont think so !!

    Im sure the memory is bad, issues, and you need a RMA to GSkill.
    Or maybe, you IMC is very very bad, and does not support a big MHz speeds.

    Try to 2000 MHz ( 11-11-11-31 )...
  2. Ok, I complete now 2 hours running a Prime95 and...

    Ok, I complete now 2 hours running a Prime95 and 3DMark2013 ( fire strike extreme mode looping ) at same time, no errors, no fails, and no bsod.

    With 0.005 vCore increse, increse to 1.75v CPU PLL...
  3. But with 0.005 vCore increse ?? So 0x3b =...

    But with 0.005 vCore increse ??
    So 0x3b = increse vcore ? or not ???
  4. I see a little dangerous run prime95 and 3dmark...

    I see a little dangerous run prime95 and 3dmark at the same time, but I can try.

    Man, I dont know, but the power supply is Corsair HX Series, with an efficiency of silver.

    Also, I have seen...
  5. You sure you have a cow's head on the avatar ?...

    You sure you have a cow's head on the avatar ?
    Come on man, we're talking about serious things.

    And no, I dont have mixed memory units.

    And I have said above, that also my PC is able to spend...
  6. Yes I have now 320.00 driver, but first, I've...

    Yes I have now 320.00 driver, but first, I've also tested with 314.22 WHQL.



    Hi, I have two identical 2 x 4GB kits.
    But right now, I'm just using 1 memory kit (2x4GB).

    And I have installed...
  7. BSOD code 0x1A with 3DMark 2013 ( loop )

    I'm doing stability test, with 3DMark 2013, settings ( Fire Strike, Extreme Mode and loop ), and after two hours, I have a BSOD 1a. ( 0x0000001a (0x0000000000041790, 0xfffffa8004c64f70,...
  8. Not a bad option, if I this error occurs again, I...

    Not a bad option, if I this error occurs again, I will do clear CMOS and re-flash Bios.
    And also as you say, load XMP, save, and then change the VCCIO lower voltage.

    one more thing, what is...
  9. I'm not using the XMP profile, because VCCIO...

    I'm not using the XMP profile, because VCCIO voltages, is set very high. ( 1.264v with XMP )
    And really, everyone in all forums, recommend putting the RAM settings manually, representing the XMP...
  10. Im not use a XMP profile, I set manually, but...

    Im not use a XMP profile, I set manually, but representing XMP ( 10-12-12-31-2t ) 1.65v DRAM - 1.15v VCCSA - 1.175v VCCIO
    And with this config. stable for 15 hours in Prime95, and 12 hours in...
  11. BugLed code 23 after restart ( randomly )

    The system works fine, no problems, but sometimes, after restarting the PC, no boot, and giving me the code 23.

    I turn off the system, and show me "the ovecrclock failed" and I need join the bios....
  12. Replies
    2
    Views
    4,266

    BSOD code 0x7f ( posible fix )

    What is it the BSOD code 0x7f ?

    This happening playing Medal of Honor Warfighter (Multiplayer), freeze screen, sound freeze and show me this BSOD code !!!

    In the WEAH errors say Kernel-Power.
    ...
  13. Replies
    698
    Views
    427,891

    What is it the BSOD code 0x7f ? This happening...

    What is it the BSOD code 0x7f ?

    This happening playing Medal of Honor Warfighter, freeze screen, sound freeze and show me this BSOD code !!!

    In the WEAH errors say Kernel-Power.

    I have a 4.4...
  14. Replies
    20
    Views
    101,242

    Sticky: According to the results of the photo below, You...

    According to the results of the photo below, You think, the memories are sufficiently stable ?

    One thing I do not understand, why the memtest86 reports the shows as 3466 MHz, when actually running...
  15. Replies
    16
    Views
    19,259

    Ok, thank you very much for the help ! :D

    Ok, thank you very much for the help ! :D
  16. Replies
    16
    Views
    19,259

    Ok, my system completed now 12 hours Prime95,...

    Ok, my system completed now 12 hours Prime95, without fails/errors, in mode blend ( but custom with 5Gb of 8GB installed )

    With this configuration:

    CPU @ 4.4 GHz
    Memory @ 2600 MHz (...
  17. Replies
    16
    Views
    19,259

    Ok, this is the colors of the voltages !! ...

    Ok, this is the colors of the voltages !!

    http://img163.imageshack.us/img163/6421/sinttuloogpr.png

    Now Im running with 1.15v for VCCSA and 1.175v for VCCIO and 1.70 for CPU PLL !!!

    Just need...
  18. Replies
    16
    Views
    19,259

    I've only dropped a little voltage to VCCIO. I...

    I've only dropped a little voltage to VCCIO.

    I have since 1.175 ( to relax a bit these 1.264 that the motherboard has show me in auto )
    So far it seems stable, but I have to keep trying longer...
  19. Replies
    16
    Views
    19,259

    And I was wrong again, lol, I find it funny...

    And I was wrong again, lol, I find it funny because the really my fails is positive.

    The VCCIO with XMP1/XMP2 and manually is 1.264v
    The VCCSA with XMP1/XMP2 and manually is 1.170v ( not...
  20. Replies
    16
    Views
    19,259

    Oh sorry, I was wrong, I'm crazy, not 1.6v-1.7v,...

    Oh sorry, I was wrong, I'm crazy, not 1.6v-1.7v, is 1.26-1.27v, that madness, y edited now my post.

    I run 1707 bios version. Now I boot my PC with manually on 1.15v VCCIO/VCCSA just need to cheack...
  21. Replies
    16
    Views
    19,259

    Yes, I tried putting XMP1 and XMP2, and manually,...

    Yes, I tried putting XMP1 and XMP2, and manually, and the bios shows me the same values​​.

    I try this night reset CMOS, or try to set these values ​​manually and look for voltage stability.
  22. Replies
    16
    Views
    19,259

    VCCIO and VCCSA question !!

    I have a one question for the teachers on this site !

    I have an i7-3770K overclocked to 4.4 Ghz + Asus Maximus V Formula , and until now, had some memories of 1866 Mhz.
    The VCCIO and VCCSA...
  23. Replies
    698
    Views
    427,891

    Why not buy two kits of the same frequencies and...

    Why not buy two kits of the same frequencies and mix this ?

    Supposed to be the same, that 4x4, only the first option: two modules are packaged to sell to the public, and the second option: 4...
  24. Replies
    698
    Views
    427,891

    No, I dont have this software. Ony I have a Asus...

    No, I dont have this software. Ony I have a Asus Boot Settings and Asus PC Diagnostic.

    PS: Is competible this memory RAM with MVF ?

    F3-2400C10D-16GTX
    G.Skill Trident X DDR3 2400 PC3-19200 16GB...
  25. Replies
    698
    Views
    427,891

    I have this settings !! Is default settings !! ...

    I have this settings !! Is default settings !!

    http://img33.imageshack.us/img33/5355/130408182251.jpg
Results 1 to 25 of 37
Page 1 of 2 1 2