Search:

Firstly what BIOS rev. Thats all in the microcode.
Secondly I run a new BIOS that has been modded with an older microcode on purpose. These cause a significant performance hit. A bit surprised that...

Well its getting a bit on the warm side at that point and has already passed two down clock thresholds.
Best cure........watercooling.

Sounds like something is fubar with the install.
Try uninstalling and delete the installation folder (uninstaller leaves orphans behind)
Then reinstall and reboot then make any changes needed.

I dont think its the lighting as much as it is the software. The only thing I was able to get to actually work were strips.
Is it one fan or multiples?
Try one at a time. One bad LED ruins it for...

Im running 901 modded to MC39. Ill stick with my pair of 2080Tis for now. Im not about to spend that much $$ on a GPU from scalpers. Id love to put a pair of 3090 strix cards in but even at MSRP...

Ahh, you only have 6 years on me and about half the rest of the crowd here.

Best Advice I can give you for now is wait a little bit Everything is at end of life. Like worst Ive seen since my...

Ram is tricky up in the 4000 Mhz and over range. Wont run on my system without manually tuning and there is no real gain with it. Chino did a nice write up about higher speed ram and in the end after...

Turbo boost 3.0 has been discontinued. Intel has removed it and windows updates will remove it because of exploits discovered in the app.
You can enabled it in the BIOS but also enable intel speed...

Your board has the BIOS flashback button built in where you can flash the bios even without a CPU, RAM or GPU installed if you want.

Try this, right from your manual. just make sure the USB is in...

You are better off getting the drivers off the support page. Whats on the USB is always outdated and you end up having to update everything. I always just download what I need onto a different PC...

Yes you can download a PDF manual from the ASUS website. Just search your mobo then click the support then manual. about 20 different languages even.

Theres a fix for that.......I agree the stock heat sink sucks but I put one of these bad boys on there and problem solved. VRMS never went over 40C.
...

What graphics card?
Im assuming you are going air cooled on grahics by the choice of coolers. Are you planning on attempting an overclock?
What case? Im not a big fan of AIOs but a 240 isnt very...

Aura/armory crate has never worked without bugs since day one. It never worked on a razor keyboard for me though multiple versions. I gave up after a few years of bugs.

Did you save the previous BIOS? if so flash it back.

Id unistall Aura and move along to something else. It hasnt been without bugs from day one.

Forget the AI tuner and for the love of god DO NOT INSTALL AI SUITE!!!!!!. Do it all manually.
Get a stable clock on CPU first then move on to ram. Plenty of tutorials out there and several on here.

The 6 pin is the same as a 6 pin on a GPU, dont reverse any pins, it will fry. I had the same doubts because the socket isnt the same but a round peg will fit in a square hole. 850 watts is highly...

Sounds heat related. Check your voltage with HWinfo as well as core temps and set it to a static voltage and for the love of god don't use AI suite!! the 10 series seems to have a higher VID table...

Unfortunately they aren't compatible. If you want to synch anything with AURA it has to be an asus product with the exception of strips. Everyone wants to keep their stuff working only with their...

Not that difficult to do yourself. There's multiple tear down vids on your tube as well as multiple sources to buy the batteries be it aftermarket or OEM. I have the same machine and replaced mine...

Yeah, now put a 10980XE OC to 5GHz in there and wait for BSOD. Mine did OK on a 9940X with the heat killer water block but with the stock cooling it was passing 80C at 4.6GHz and you could smell it....

We have a winner on final Jeopardy!!
They make decent hardware and most of the time with desktops anyhow the BIOS gets straight eventually. Laptops are and will always be limited access.
The other...

Laptops have always been this way and probably always will be. Limited settings in BIOS and even if you try Intel XTU to tune it you get screwed. Get used to 2400Mhz on a laptop. Been there, done...

Looks like you didn't clone the entire drive. The most important folder to keep track of is the eSupport folder located in C:\
The only thing you get from the factory recovery partition is the...