Search:

Type: Posts; User: Braegnok

Page 1 of 10 1 2 3 4

Search: Search took 0.10 seconds.

  1. Thread: Dust cover

    by Braegnok
    Replies
    10
    Views
    1,146

    Hello Stanislav_+7, Digi-Key might have what...

    Hello Stanislav_+7,

    Digi-Key might have what your looking for your U.2 connector,.. check product index for Cap (Cover), Dust. https://www.digikey.com/en/products

    And for the Card Reader, Scart...
  2. Thanks Silent Scone@ROG, I guess seeing is...

    Thanks Silent Scone@ROG,

    I guess seeing is believing lol,.. after reading the manual several times before ordering the MZ690A,.. after removing the M.2_1 heatsink and my card fit in the top x16...
  3. Silent Scone@ROG, Great looking rig! Can you...

    Silent Scone@ROG, Great looking rig!

    Can you confirm something for me, please correct me if I'm wrong.

    The Z690 Apex supports 5 x M.2 slots, the M.2_1 slot with 12th gen processor supports...
  4. There were several reasons performance wise for...

    There were several reasons performance wise for me to go ahead with this Z690 build,.. but another reason was the sweet black button on the edge for top PCIe x16 slot,

    .. and the way Asus may have...
  5. Whoops double post. :rolleyes:

    Whoops double post. :rolleyes:
  6. Vary nice, I think the Z690 Formula is white this...

    Vary nice, I think the Z690 Formula is white this time.

    It's been a good week,.. I pulled the trigger on Z690 Apex, and than won the egg shuffle for i9-12900K ,.. and have two DDR5 memory kits on...
  7. Replies
    19
    Views
    1,038

    I paid the extra for express shipping. :p ...

    I paid the extra for express shipping. :p

    90730

    My board & CPU arrive today.
  8. Replies
    19
    Views
    1,038

    +1,.. 4800MHz is much better than zero. Only...

    +1,.. 4800MHz is much better than zero.

    Only guessing those 4800MHz 32GB modules are going to be DS Micron 40-40-40-77 @ 1.1V,.. the 8GB modules might be SS Micron 40-39-39-77 @ 1.1V.

    Most...
  9. Replies
    19
    Views
    1,038

    This morning for $210.44,.. I bought two sticks...

    This morning for $210.44,.. I bought two sticks Dell Memory Upgrade - 8GB - 1RX16 DDR5 UDIMM 4800MHz from Dell Busness. https://www.nowinstock.net/computers/memory/

    That's sweet! Now I can...
  10. Replies
    19
    Views
    1,038

    It's tough when you have your motherboard, CPU...

    It's tough when you have your motherboard, CPU ordered and can not find any DDR5 memory.
  11. [QUOTE=iBruceypoo;846863]Outstanding setup ROG...

    [QUOTE=iBruceypoo;846863]Outstanding setup ROG brother! :D



    I used to say cache is king but nowadays with RL,.. indeed surface area is king.

    The mora does vary well after you get everything...
  12. Asus PG32UQ is in stock on Amazon for $1,275.00...

    Asus PG32UQ is in stock on Amazon for $1,275.00 and at local Bestbuy stores for pick-up $999.99 in Colorado USA.
  13. Sticky: +1 on sitting out on AlderLake,.. going to be...

    +1 on sitting out on AlderLake,.. going to be interisting next few months as reviews/benchmarks start to shake out. :D
  14. I'll be ready to run some benchmarks with the...

    I'll be ready to run some benchmarks with the M13A system this weekend, finally have all blocks on air test,.. plan on turning on pumps in the morning.

    90474
  15. For the base line tRFC,.. I always start with 180...

    For the base line tRFC,.. I always start with 180 X the MHz, divided by 2000.

    180 * 5066 / 2000 = 456,.. if that is stable, the next tRFC I try is half of that (228). If 228 is unstable, you know...
  16. 5066Mhz 17 17 17 37 1T is the highest...

    [/QUOTE]
    5066Mhz 17 17 17 37 1T is the highest Mhz - lowest latency I could achieve "on air" from the Gskill 4800Mhz CL17 ultimate b-die kit :cool:

    Could probably drop that tRFC 350 down to the...
  17. Noctua is in the process of updating most...

    Noctua is in the process of updating most multi-socket CPU cooler models,.. due to LGA 1700 socket mounting hole pattern, and stack-up height.

    It's no surprise that LGA 1700 requires a new...
  18. Replies
    6
    Views
    208

    Barrow makes a full cover water block for the...

    Barrow makes a full cover water block for the Strix GTX 1660 Ti card. https://www.dmodz.co.uk/Barrow_Asus_Rog_Strix_GTX1660Ti_waterblock_BS-ASS1660T-PA
  19. Replies
    4
    Views
    142

    Looks like you will have plenty of room with the...

    Looks like you will have plenty of room with the Meshify 2 XL chassis,.. swapping covers with the gromets on right side. Vary nice chassis!

    I wouldn't worry about your 11900K chips SP prediction...
  20. Replies
    4
    Views
    142

    Hello, My first Asus motherboard was the P5E64...

    Hello,

    My first Asus motherboard was the P5E64 WS Evolution, and I have been using Asus boards ever since. Generally I buy the WS boards, but last few years have started buying Extreme and Apex...
  21. I will most likely pass on Alder Lake, if I would...

    I will most likely pass on Alder Lake, if I would decide on building a new system it would depend on the spacing above the top x16 PCIe slot,.. I need 16.8mm clearance for my backplate,.. the Glacial...
  22. Replies
    4
    Views
    378

    Hello, You may have corrupted your OS boot...

    Hello,

    You may have corrupted your OS boot sector,.. booting into Windows multiple times with an unstable memory profile or unstable system overclock,.. causing the Windows BSOD's will corrupt...
  23. I thought you would enjoy that. Received my...

    I thought you would enjoy that.

    Received my active backplate today, the craftsmanship is outstanding.

    90308

    90309

    90310
  24. Did you notice the tracking # on the Newegg...

    Did you notice the tracking # on the Newegg invoice, I posted on page one of this thread,.. lol

    They are nice guys, but still waiting on solid microcode for gear 2 memory training/stability.

    +1...
  25. The Hynix 5333MHz 2x8GB kit is good to go, I...

    The Hynix 5333MHz 2x8GB kit is good to go, I managed 5333 XMP, 5600, 5866, and 6133MHz stable with vary loose default timings,.. will pull modules and install copper heatsinks.

    I will tune those...
Results 1 to 25 of 241
Page 1 of 10 1 2 3 4