Search:

Type: Posts; User: Zarathustraa

Page 1 of 9 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    3
    Views
    166

    How can I break into my own router?

    I only have a twenty character password, and have maybe up to six characters I am unsure of. A few of the characters might be other symbols that look similar. Since I know the position of the unknown...
  2. Replaced the battery. I saved out a txt file, and...

    Replaced the battery. I saved out a txt file, and not a com file. I can't find some of the settings.

    Do you know if settings such as:

    Disable Parity Workaround [Disabled]
    CMD Margins [40]
    ...
  3. Max pcie cards this board can support?

    I'm trying to figure out how many pcie cards I can slot into the board. Looking at it it looks like I could fit between 3 to 4 of these compute units I'm looking to add. The wrx80 would be ideal. Is...
  4. I should replace the battery anyways. I guess...

    I should replace the battery anyways. I guess when they get low stuff starts acting oddly. I have had the machine for five years, and it's about time. I am probably a few months away from losing a...
  5. Won't I lose my overclocking profile by pulling...

    Won't I lose my overclocking profile by pulling it?
  6. Board is occasionally taking me to bios update screen at boot.

    Sometimes, the system boots me into the bios update screen. I think it usually happens after power cycling. I boot into the screen and just reboot, as I don't have a bios set to load. Does anyone...
  7. Replies
    4
    Views
    318

    That should be fine. On their workstation board...

    That should be fine. On their workstation board they just mention a ten disk limit. I don't know if that is ten total, or just ten per RAID.
  8. Replies
    4
    Views
    318

    Oh, I'd just have RAID 0 on the plotting array....

    Oh, I'd just have RAID 0 on the plotting array. There's other storage attached that safe long term. The ideal build has like 10 nvme drives in RAID 0, and about eight 8 TB SATA III drives in raid 10...
  9. Replies
    4
    Views
    318

    Chia plotting rig

    I'm building a system for plotting Chia, and just have a few unknowns I need to resolve first. With the Asus WRX80 board how many nvme drives may I put in RAID 0? Can I raid drives together between...
  10. Replies
    354
    Views
    55,898

    Is bootable nvme raid 0 possible for Windows with...

    Is bootable nvme raid 0 possible for Windows with this board?
  11. Replies
    354
    Views
    55,898

    Does the DIMM.2 have 8 or 4 pcie lanes available ...

    Does the DIMM.2 have 8 or 4 pcie lanes available when two drives are installed?
  12. Awesome. So I can safely poke around if I'm...

    Awesome. So I can safely poke around if I'm careful to not damage the device in the process, meaning attach the serial cable properly.
  13. Does the warranty void sticker still matter?

    So, I have a router that is currently not functional. (ports and wireless do not work) I'm pretty sure it is an issue with a bad flash of the firmware. I can open the device up, and flash over the...
  14. Replies
    6
    Views
    3,346

    Well, I Yeah, I've gotten into recovery mode in...

    Well, I Yeah, I've gotten into recovery mode in the past. However, I cleared the nvram settings from the cfe page, and think some of the router values were lost. Pretty, sure a flag needed for...
  15. Replies
    6
    Views
    3,346

    Oh and there's no soldering involved. It should...

    Oh and there's no soldering involved. It should be safe to just flash back to stock this way, right?
  16. Replies
    6
    Views
    3,346

    Ok, I can connect wirelessly, but the lan ports...

    Ok, I can connect wirelessly, but the lan ports are not operational.
  17. Replies
    6
    Views
    3,346

    Believe I have bricked my rt-ac5300.

    I can't get the ac5300 to enter recovery mode. I've tried powering off and holding in the reset button, while powering back on, with no luck. I have also tried the wps button for the same results....
  18. You just need to play around with SHIM and MOK...

    You just need to play around with SHIM and MOK till you can get things working. I believe this should help, even if you're not using rEFInd. http://www.rodsbooks.com/refind/secureboot.html
  19. You can try this....

    You can try this. https://wiki.archlinux.org/index.php/Secure_Boot

    That should sign all of the kernels correctly; but, I've always given up on enrolling the new keys.

    I have had some luck using...
  20. Replies
    15
    Views
    10,135

    That's odd. I always freeze with "Boot drive...

    That's odd. I always freeze with "Boot drive only" enabled. But, I'm also running a 950 pro with an 850 pro on the first SATA port, for the linux swap partition. Wonder if Asus fixed the issue with...
  21. Replies
    15
    Views
    10,135

    But, are you booting with only the boot drive...

    But, are you booting with only the boot drive enabled, or all drives enabled?
  22. I might go back down to default. Honestly,...

    I might go back down to default. Honestly, changing the phase setting didn't really show much of change for temp. Is there any particular reason to run default over optimized or extreme?
  23. Replies
    15
    Views
    10,135

    Anyone running an NVME drive as their primary...

    Anyone running an NVME drive as their primary drive? It would be interesting to see if this update fixes the machine check exception BSOD, when booting into Windows with only the NVME boot drive...
  24. Figured out the blue screens I was getting every...

    Figured out the blue screens I was getting every time I booted into Windows 10, without first getting dumped to the bios to fix an unsuccessful overclock, was the result of having only the boot drive...
  25. I know this is a bit late, but I've had a similar...

    I know this is a bit late, but I've had a similar issue too. Only seems to happen on reboots, and only if I'm booting into windows. (might pop up if reboot from windows into Linux too, but I think...
Results 1 to 25 of 211
Page 1 of 9 1 2 3 4