Search:

Hi, while I have the Encore.. I do not have that CPU cooler, but the directions for it are pretty straight forward. from the pump (block) on the H100i you should have a Sata power cord, and a...

hi. I've only experienced the rainbow effect when power has been removed from the system.. only then does it do this. static colors should be options for both when the system is on, and off (either...

well.. hopefully there is a fix but for the meantime I added a small strip of thermal pad to cover the LED. out of site out of mind lol.

84860
84861
84862
84863

lol I will use a thermal pad to cover it before I go that route. .. but I still don't see either to be a reasonable solution. Prior version/ had jumpers to disable/enable the LED, but this neither...

Hello, I recently installed and have been trying to figure out how to disable the red LED's in my ROG dimm.2 module, supplied with my Rampage 6 Extreme Encore motherboard. I figured with having a...

my question didn't have anything to do with overclocking in BIOS. I stated, being on BIOS version 0401, using Intel extreme tuning utility. ..... the core ratio maxes at 80. But, on BIOS versions...

Hello, I was hoping someone with knowledge in this particular area could chime in. When I first purchased the ROG Encore motherboard I updated BIOS and noticed a few things other than lesser...

correct, which ends up being 3-slot spacing for NVlink or SLI-HB bridge.

as stated in the OP, I am using the included fan hub that came with the ROG Encore motherboard. .. using the plug that it came with it and it's connected to the motherboard via node. again, this...

thanks for the suggestion, but I shouldn't have to uninstall Asus AI suite. I've used this program on my last 3 builds and have never had an issue running the program all while using Fan Xpert to...

the OP question was answered.. but sure, why not.

I had 3 way SLI.. 2 slots each card. removing the middle card you are left with 2-way sli using 4-slot. After the upgrade, they moved the...

compare the two boards and you will see why I had to buy a new SLI bridge.....

you will be looking for 3-slot. I just had to purchase one coming from the 4-slot (Rampage V edition 10).

Hello, was hoping someone could better explain what was needed to be changed in BIOS, or elsewhere, to prevent this from happening. This is the first time I have used a fan hub in a build, the...

the 2nd series being top rated to 3600, and new being 4400 I would say it's safe to assume Bios will display your xmp profile for the rated 3600mhz.

hello, and sorry in advance for punctuation. Looking up your Mobo it states,
3rd Gen AMD Ryzen™ Processors
4 x DIMM, Max. 128GB, DDR4...

I decided to continue down the X299 > Z390 (quad channel and pcie lanes were the determining factors) path. After watching countless amounts of reviews and comparing benchmarks I decided on the ROG...

I've got a few questions for the gurus ;) I am looking to upgrade my current motherboard/cpu from x99 (rampage v edition 10 and 6850k) to x299 or z390. I will be reusing my Corsair Dominator...

you have your thumb drive formatted to Fat32.. and when you downloaded and extracted the BIOS update file did you rename it at all?

really digging that monoblock from the 2nd picture in post #3.. mine looks different~

66798

Hello all, and sorry for the vague title.

I just updated my current X79 setup to an X99.. Rampage V Edition 10, i7-6850K, and 32GB of Corsair Dominator Platinum 2400 C10.

After pulling my old...

lol once again, they release a small hand full and it will take over a year before we can find them here in the states.... and when they finally do arrive they are going to be listed for over $100+...

might take a look at my thread, I was in similar boat a few months back.. angled fittings are how its done unless your going full water block in which you can use a parallel bridge by EK
...

If your on somewhat of a budget.. Corsair AF 120/140 quiet editions, they come with blue/red/white customize-able rings which match theme builds which is cool and they work great and they are Quiet...

yo! water cooling isn't that bad, jus sayin :) I had never done anything water cooling related before this last build of mine either, but with this Forum you can find a lot of help which makes the...