Search:

Type: Posts; User: Falkentyne

Page 1 of 10 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    125
    Views
    32,243

    Sticky: This issue should be fixed in the next update.

    This issue should be fixed in the next update.
  2. Sticky: Was this tested on a Z790 board? I think shamino...

    Was this tested on a Z790 board?
    I think shamino said that any P-core SP above 135 is not possible

    You can verify the CPU capability by doing a vmin test at 5.7 ghz by looping Cinebench R23 for...
  3. PSA: Update your Management Engine Firmware on Z690 for Raptor Lake.

    This will resolve post Q-code, PCI Express and RAM issues.
    Best to do this with your ADL CPU, if you still have it.
    If you only have RPL, please use defaults.
  4. Sticky: Asus, Z790 and Raptor Lake: World record overclocking

    Thank you to Shamino and the Asus ROG team for allowing me to test their engineering sample Z790 Extreme and 13900KF QS CPU.

    DISCLAIMER: QS CPU’s may be final silicon but there can still be...
  5. That ID is from the ASMedia SATA controller,...

    That ID is from the ASMedia SATA controller, while 7AB4 is from the Standard NVM Express Controller.
    Setting PCIE native power management to disabled fixed the NVM Express WHEA. Also setting the m2...
  6. Replies
    31
    Views
    7,393

    Using 22H2 installed from the official ISO. No...

    Using 22H2 installed from the official ISO. No issues yet, except now I can see that Stockfish chess (run through Chessbase or Arena UCI) doesn't put all the P-cores to sleep when alt tabbing into a...
  7. Your board has an onboard power button. What...

    Your board has an onboard power button.
    What happens if you use the onboard power button instead of the case power supply button?

    What happens if you disconnect the "RESET" pins on the...
  8. Microcode 15 works in 2004 if you delete the...

    Microcode 15 works in 2004 if you delete the other microcodes and insert it. AVX512 works. bscool has it modded already.
    Just don't expect raptor lake to work if you delete all the microcodes.
    ...
  9. No one answers because no one knows the answer to...

    No one answers because no one knows the answer to your question. You're asking a very difficult, sweaty question.

    No one can tell you what the 'safe' voltage is for 1 core loaded. I'm still...
  10. You can reduce the PCH temps by swapping the...

    You can reduce the PCH temps by swapping the thermal pad with something like a Gelid Ultimate pad. Unfortunately I don't know the proper thickness, but it's more than 2mm. Might require you to...
  11. E cores being put to sleep will of course give...

    E cores being put to sleep will of course give you higher vcore under load, because there is less current (amps), so the voltage will drop less from the BIOS voltage setting. But since the P cores...
  12. The BIOS consists of multiple regions (Four which...

    The BIOS consists of multiple regions (Four which can be easily grouped and enumerated independenetly), not all which are flashed on the bios chip itself! It's THOSE regions which can give you a bad...
  13. Can you use a normal USB C device in that port?...

    Can you use a normal USB C device in that port?
    if nothing is detected at all, you need to flash the 2x2 USB firmware that should be available on the Asus support page for that motherboard.
  14. You can ignore this error. I used to know why it...

    You can ignore this error.
    I used to know why it occurs but I forgot. Someone posted why it happens on OCN awhile ago.
    But it's some sort of BIOS setting which triggers it when windows loads.
  15. Replies
    9
    Views
    1,850

    There was some discussion about this. Apparently...

    There was some discussion about this.
    Apparently a fix to this is, when changing memory or even CPU overclock settings, to save, go back to BIOS, turn off the system and then completely remove the...
  16. That's for fixed vcore. The old "override" mode...

    That's for fixed vcore. The old "override" mode if you don't want to use by core usage or similar. Sets cpu voltage directly to the VRM and ignores VID, AC Loadline, etc. So if you wanted...
  17. I tested Sleep (S3?) on my Maximus Extreme just...

    I tested Sleep (S3?) on my Maximus Extreme just now on 1304 and it resumed fine after a minute or so of sleep.
    RTX 3090 FE with fast boot disabled.

    Isn't Qcode 97 an error with VGA/video BIOS...
  18. Bios 1302 was released a few days ago. You can...

    Bios 1302 was released a few days ago. You can try that.
    Remember--before running EZflash, ALWAYS go to the right most menu and choose "Load optimized defaults", save and exit. Then after you are...
  19. Sticky: Hi Papusan, The top m.2 on board, afaik is a...

    Hi Papusan,

    The top m.2 on board, afaik is a PCIE 5.0 slot, runs off the CPU and will drop your GPU in the primary PCIE to 8x speed if installed. If Gen 5 PCIE 5.0 NVME drives ever come out,...
  20. Replies
    81
    Views
    12,501

    Obviously, the instant slam dunk test is to ship...

    Obviously, the instant slam dunk test is to ship the CPU, motherboard, storage, PSU, RAM And video card to the retailer and have them test those 6 components together in the same identical...
  21. Replies
    7
    Views
    6,135

    I think you should read my post again instead of...

    I think you should read my post again instead of choosing to read the words you want to acknowledge.
    Your case came out in 2011.

    USB type C wasn't even a thing in 2011. How are you supposed to...
  22. Replies
    5
    Views
    1,961

    As Scone said, 6400 mhz on 4 dimm boards is very...

    As Scone said, 6400 mhz on 4 dimm boards is very difficult, and you get into a problem where it's stable on one boot and not on the next.
    Sometimes adjusting "slopes" and skews can help this....
  23. Replies
    13
    Views
    10,475

    It's a standard PCIE (video card) 6 pin cable...

    It's a standard PCIE (video card) 6 pin cable (without the 6+2 pin). Any video card PCIE cable will work.
  24. Can you link me to the exact camera that you're...

    Can you link me to the exact camera that you're using?
  25. Try lowering the VRM Switching frequency in...

    Try lowering the VRM Switching frequency in Digi+VRM.
Results 1 to 25 of 250
Page 1 of 10 1 2 3 4