Search:

Type: Posts; User: oldbrave

Page 3 of 10 1 2 3 4 5 6

Search: Search took 0.01 seconds; generated 58287 minute(s) ago.

  1. The accepted Vcore limit for the FX processors is...

    The accepted Vcore limit for the FX processors is in the 1.55v to 1.57v range anything higher and you will stand a very good chance of running into trace degradation.
    The AMD recommended temp cap...
  2. Those 8pin cpu plugs should split apart into two...

    Those 8pin cpu plugs should split apart into two 4 pin plugs !
  3. OK, lets see if wee can't get you so's your just...

    OK, lets see if wee can't get you so's your just a little bit crazy! :)
    Set up your system with just the CPU, one stick of memory in the farthest slot from the processor, the 128Gb SSD in sata slot...
  4. Replies
    12
    Views
    10,546

    Nino73 , your post is way out of place. the...

    Nino73 , your post is way out of place. the Crosshair IV Formula does support the FX processors with the 3027 bios and I doubt if there will be another bios for that board.
    AND the Crosshair V...
  5. Hummm, that's strange cause I've got a 8150...

    Hummm, that's strange cause I've got a 8150 running on a ChIVFormula with the 3027 bios quite nicely @ 4.8Gb 1.46v and never gets over 40c
  6. Replies
    5
    Views
    2,362

    Welcome to the forum :) Are you trying to use...

    Welcome to the forum :)

    Are you trying to use USB 3.0 or usb 2.0 connections ?
    If USB 3.0 then you need to make sure that you have the NEC USB 3 drivers loaded and if it's USB 2 then you should...
  7. Replies
    22
    Views
    20,286

    The benchmarks you have mentioned put more of a...

    The benchmarks you have mentioned put more of a load on the system that any type of normal use including gaming.
    If you are worried about it then place a fan blowing down on the NB, I have a 60mm...
  8. Replies
    2
    Views
    1,672

    Ya, it will probably work OK but, she is gonna...

    Ya, it will probably work OK but, she is gonna have to set up the memory manually.
    No way is it gonna boot up the first time at 2400 with all the timings set right.
  9. Thread: B2 code

    by oldbrave
    Replies
    6
    Views
    5,456

    Try clearing the cmos again, but this time remove...

    Try clearing the cmos again, but this time remove the power cord from the back of the computer and let it set for a couple of hours before you replaqce the battery and put the jumper back to it's...
  10. From your confusion it seems to me that you've...

    From your confusion it seems to me that you've failed to do one important thing and that's read the manual !
  11. Well no it's not going to OC like the z77 boards....

    Well no it's not going to OC like the z77 boards.
    The z77 is a Intel system and the Crosshair V Formula-Z is a AMD system so please don't expect them to respond the same way!
    The AMD cpu's have...
  12. Thread: 5Ghz Club

    by oldbrave
    Replies
    87
    Views
    45,609

    Is this it, I can't believe that this is all...

    Is this it, I can't believe that this is all there is that are able to clock to 5Ghz ???
  13. There is no rule that says you must have the swap...

    There is no rule that says you must have the swap file on the "C" drive. Put the swap file on one of your storage drives where there is plenty of space to play with !
  14. Replies
    18
    Views
    5,866

    I agree with Speed, remove all external power...

    I agree with Speed, remove all external power sources from the computer, pull the battery and set the clear cmos jumper to the clear position and let it set overnight then re-flash it with the...
  15. Thread: 5Ghz Club

    by oldbrave
    Replies
    87
    Views
    45,609

    I hope you don't mind if I sneak an AMD in here ?...

    I hope you don't mind if I sneak an AMD in here ?
    This is my 24/7 speed

    1341013414
  16. Replies
    41
    Views
    39,140

    Na, they wouldn't do that! I would make too much...

    Na, they wouldn't do that! I would make too much sense and would be too easy to do.
    It would take a tech at least 10 maybe 15 minutes with a bios editing app to uncap the existing bios to allow...
  17. Replies
    11
    Views
    7,926

    HiViz> Is there any where that I can find a "how...

    HiViz> Is there any where that I can find a "how too" on flashing a video card ?
    I can flash motherboards blindfolded, but in my ni on to twenty years with these computers I've never flashed a...
  18. Replies
    11
    Views
    7,926

    Here's something you might try ! See if you can...

    Here's something you might try !
    See if you can scrounge up a standard PCI video card, plug it into a pci slot leave the bad card in place then try to remote in and see if you can identify the PCI-E...
  19. Replies
    41
    Views
    39,140

    I suppose they are going to put this out for the...

    I suppose they are going to put this out for the Matrix and leave us DC2T owners out in the cold ! :(
  20. Replies
    13
    Views
    15,987

    I'm beginning to think that all retail 7970 DC2T...

    I'm beginning to think that all retail 7970 DC2T cards except for the ones that went out to the reviewers have the core and memory speeds capped by the bios. My card is the same as your's, it tops...
  21. Replies
    13
    Views
    15,987

    Thanks for the heads up on the glitch, link has...

    Thanks for the heads up on the glitch, link has be corrected!
  22. Replies
    8
    Views
    4,793

    The problem you have is that your running the...

    The problem you have is that your running the wrong version of GPU Tweak, go to my post and DL the 22.14 Ver.
    http://rog.asus.com/forum/showthread.php?24233-unoffical-GPUtweak&country=&status=
  23. Replies
    8
    Views
    6,617

    I can tell you the reason your having this...

    I can tell you the reason your having this trouble but your not going to like it !
    Win 8 is a piece of s**t, what do you expect from a OS that MS is giving away for nothing?
    I've loaded it up and...
  24. Replies
    25
    Views
    10,857

    OverClockers.com's review was done on the ASUS...

    OverClockers.com's review was done on the ASUS Crosshair 5 Forumla MB with the 1605 bios, so no worries about the 8350 with your MB, I should have mine by weeks end also.
  25. At any time during this did you try and turn the...

    At any time during this did you try and turn the 2D back on ?
    What were the clock setting when you turned the 2D off ?
    I would reset all the GPU Tweak settings with the old card in place then shut...
Results 51 to 75 of 232
Page 3 of 10 1 2 3 4 5 6