Search:

Is there an OC on the video card?

Don’t see that memory kit on the QVL.


93084*

Sure makes me wonder about memory. Have you tested it?

Oh. I see where you tried that. Disregard.

I saw a remedy for this before. Look at this thread:

*https://rog.asus.com/forum/showthread.php?127782-WHEA-Logger-Errors-(Latest-versions-of-everything)

I’m using 1403 for the KS. There’s a note in the description about the KS for 1403. Don’t know how valid it is though.

I have wondered the same thing. That’s probably right. I have seen the same thing.

Just making some preliminary observations on the difference in these two bios versions. 1304 is much more stable with memory as best I can tell so far. I have a GSkill 5600 kit which runs great on...

Mine didn’t update to ….1735 either. Flashed the new bios today.

Same here, but nothing was said about an email to explain it. ??? Â*

Just can’t get stability with my current GSKILL kit. Figured a different cpu may help. I’ll keep tuning. Thanks for the input!!

Still wonder if a bios update is necessary. Can’t find where the is chip has been officially announced.

My problem is the IMC on the chip that I have currently. Difficult to get memory stability. Kits are ok per memtest86. I was going to try another chip and retest. Silicon lottery of course. I grabbed...

Any update on this chip as far as release date? Looks to have modest increase in performance over the standard 12900K. Heat is really going to be a problem at 150W. I guess bios update will be needed.

I thought there was a setting in device manager for each network adapter for power management. Something about “allow this device to wake the computer.” You could try to uncheck that to see if that...

Same happened to me as well with my gladius III. My claymore II also was affected. Unplugging and reconnecting seemed to help.

I always thought this was the best review of combining memory kits here:

*https://rog.asus.com/forum/showthread.php?57038-Don%92t-combine-memory-kits!-The-meat-and-potatoes-overview

This tool seems to do nothing when I try to update with it. I still have the same Cypress PD FW Version of 100F after using it. Am I doing something incorrectly here?



92288

Been around. Switched to z590 and now z690. Big improvement over my rampage boards. Loved those too though. :)

My new z690EG has no way to swap bios versions except by using the button on the motherboard itself. There’s no way to change bios chips via the bios which needs to be implemented again and standard...

I have a Z690EG and a vertical GPU mount. Of course it’s difficult to get to the physical bios switch on the board itself so I have relied on the bios to switch versions/bios chips. However, I’m on...

I finally got my GSKILL 6000 kit working and stable. Hardware in my signature. Bios 1101. Used cinebench R23 for CPU stability testing and passed fine. I noticed going from 0811 to 1101 there was a...

Or you can do this:

* https://rog.asus.com/forum/showthread.php?127828-RAID-Driver**

Yes. Thanks. That is helpful. I had not encountered this issue previously.

Good to know. Thanks again. :)