Search:

Type: Posts; User: djbigbear

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. nope, i didn't remove the sticker since...

    nope, i didn't remove the sticker since aftersales policy in my country is messed up.
  2. This M.2 heatsink really performs well if you...

    This M.2 heatsink really performs well if you replace the thermal pad with a good thermal tape (i used 3M thermal tape).
    76468
    on my samsung nvme 960 pro standard load(non stress test) on the...
  3. don't you think it's about time you try my...

    don't you think it's about time you try my suggestions a few pages back?
  4. well i'm certainly doing my best trying to help...

    well i'm certainly doing my best trying to help by checking my own list of troubleshooting. since we all learned & experienced it differently, there's no way we all think the same thing and have the...
  5. his problem is more akin to stutters than drops,...

    his problem is more akin to stutters than drops, when i had the fps drops it was happening every few minutes with each drop lasts about 20 seconds, it practically dropped to 20 fps for 20 seconds and...
  6. maybe i'm just being paranoid.. i couldn't help...

    maybe i'm just being paranoid.. i couldn't help it. i'd prefer everything is on a condition that i manually set. just for the ease of mind.
  7. no i don't think there's a problem with HD and...

    no i don't think there's a problem with HD and SSD since the game is preloaded to RAM, what i consider weird is that your GPU voltage is actually fluctuating too.
    do you have cl_forcepreload 1...
  8. If you have a Ferrari, would you drive it at max...

    If you have a Ferrari, would you drive it at max speed everytime you ride it?

    capping the performance of GPUs has several benefits:
    1. your GPU don't have to draw too much power.
    2. Less power...
  9. Exactly what i did, excluding the triple...

    Exactly what i did, excluding the triple buffering part and turning vsync from nvidia control panel. I have no trouble using the current setting, it's it's all working just fine using any game's...
  10. Because it's not straining my eyes when i play...

    Because it's not straining my eyes when i play for hours.
    Most people knew that enabling vsync would bring the infamous input lag into play, but what they didn't know that you could practically...
  11. hmm.. that was one of my suspicion too. unlike...

    hmm.. that was one of my suspicion too.
    unlike l337g0g0, i play CSGO with max setting, vsync on triple buffering, MSAA full, FPS locked at 120.102 fps(120hz screen) with afterburner. Nvidia driver...
  12. dust cover since it's on the air intake part of...

    dust cover since it's on the air intake part of the laptop. i left mine alone, it would be a hassle to have to clean that part every month.




    have you turn off turboboost yet?
  13. i tried using 2mm thick pure copper plate on it,...

    i tried using 2mm thick pure copper plate on it, doesn't make any difference. i assume it would be pointless as the thermal tape conductivity is minimal. using thermal glue is the only way to go, but...
  14. hmmm, according to my experience, covering...

    hmmm, according to my experience, covering heatpipes with another heatsink+thermal pad/tape will only make it worse. in this particular case those thermal pads/tape insulate heat rather than...
  15. you should see youtube tutorial here:...

    you should see youtube tutorial here:
    https://www.youtube.com/watch?v=Wm_XBN6c1J8&t=557s
    or here:
    https://www.youtube.com/watch?v=sSY44PVaOs4
  16. btw, i should have mentioned it earlier, i didn't...

    btw, i should have mentioned it earlier, i didn't set my opolars fan speed, i just let it go automatically depends on the opolar sensors

    @praky
    i could have sworn the opolars did bring down a lot...
  17. i will post the temp without opolar later at...

    i will post the temp without opolar later at night.

    as to the chinese knockoff, actually what you need to get is the exact type or model, mine also the chinese knockoff named tuffware instead...
  18. before 2 unit opolar 81-83C, after 76-78C

    before 2 unit opolar 81-83C, after 76-78C
  19. yes, this i can confirm, but i have to try one...

    yes, this i can confirm, but i have to try one more thing. the ventilation of the grill covers i use seem to be too tight, it blocks much of the cool wind from my cooling pad. i need to try...
  20. Not highest, it's the highest my GPU allows since...

    Not highest, it's the highest my GPU allows since mine is 3GB, going higher settings would just be counter-productive. usually medium-high with benchmark fps averaging @ 95 fps.
    before the mod is...
  21. my test is using ROTTR: - 1 benchmark directly...

    my test is using ROTTR:
    - 1 benchmark directly
    - wait on menu until CPU temp touches 70C then benchmark again.
    I find this quite accurate to get max gaming temp since the other games never touched...
  22. @mwest28 Powerglue;) glued from the inside....

    @mwest28

    Powerglue;) glued from the inside.
    you have to pay attention to the grill thickness, sometimes it curves too much it became longer than the laptop feet. i fix mine by using rubber feet...
  23. Drilled and tested. 73361 73364 73362

    Drilled and tested.

    73361
    73364
    73362
  24. *edit* argh screw it, i'll drill my original...

    *edit*

    argh screw it, i'll drill my original bottom cover tomorrow.
    73334
  25. guys, how do you manually change fan speed if...

    guys, how do you manually change fan speed if bios has no option to change?
Results 1 to 25 of 30
Page 1 of 2 1 2