Search:

Type: Posts; User: Quozzo

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. I don't use the BIOS fan controller but I do use...

    I don't use the BIOS fan controller but I do use Asus Suit for the fan controller. There, the CPU fan is the only one that I can't alter the source for, so it is constantly monitoring the CPU temp...
  2. Replies
    18
    Views
    1,192

    Yes 3600C15 is better than 3200C15 but the speed...

    Yes 3600C15 is better than 3200C15 but the speed will be negligible. As posted above, make sure that the sticks are in the QVC list for the MoBo.
  3. Replies
    18
    Views
    1,192

    3000MHz - 3200MHz @ CL15 is the sweet spot. Tbh I...

    3000MHz - 3200MHz @ CL15 is the sweet spot. Tbh I got 3600CL15 and regret it. I should have saved £100 or so and got a slightly cheaper kit but my 32GB was £450 at the time. I imagine it's come down...
  4. Yes. try again at 5,000MHz For comparison. My...

    Yes. try again at 5,000MHz

    For comparison. My 7900X (10 core) at 4.9GHz gets a ~2500 score.
  5. Replies
    36
    Views
    3,585

    If you want VROC go AMD. They have it enabled,...

    If you want VROC go AMD. They have it enabled, for free. Not sure about Zen2 but I seriously doubt they will retract features from their previous lineup.

    As for the latter question. An NVMe is no...
  6. Replies
    22
    Views
    1,440

    Have you monitored the power draw for each card...

    Have you monitored the power draw for each card using something like HWInfo and/or Afterburner to see if it is drawing too much. If not then it sounds like there could be a fault with the PSU.
    ...
  7. Replies
    18
    Views
    950

    @ROb W. Just FYI the R6E uses slot 1 & 3 for x16...

    @ROb W. Just FYI the R6E uses slot 1 & 3 for x16 (The one below the x4 slot and the second one up) Your fist post made it sound like you were going to make a loop with it in slots 1 & 2.
  8. Replies
    10
    Views
    1,437

    One of the DIMM.2 can use either the PCH or CPU...

    One of the DIMM.2 can use either the PCH or CPU lane, configurable in the BIOS.
  9. Then get the side panel off and take a look. It...

    Then get the side panel off and take a look. It might have been assembled by a "technician" but you can improve on it if need be. Unless there is some sticker preventing you from removing the side...
  10. Put the fan profile on Performance and don't run...

    Put the fan profile on Performance and don't run any programs. The temperature of the CPU should just be above room temperature which is anywhere below 40c. Now run a program like Prime95 and the...
  11. Replies
    15
    Views
    1,797

    No worries. The RAM can handle 4000MHz but...

    No worries.

    The RAM can handle 4000MHz but the CPU probably can't and is why the PC won't post. You would first need to run the RAM at stock speeds and see if it boots and then run a stress test...
  12. Replies
    15
    Views
    1,797

    The XMP profile is an overclock, it's pre-applied...

    The XMP profile is an overclock, it's pre-applied and saved on the RAM but it's an overclock non-the-less. The RAM may be capable of those speeds and advertised as 4000MHz memory but the Internal...
  13. Replies
    3
    Views
    643

    There's a 2 slot SLI bridge in the box that...

    There's a 2 slot SLI bridge in the box that doesn't have connectors for the nonexistent card in slot 2, if you're using 2 way SLI.
  14. Replies
    7
    Views
    1,210

    You could use clear nail varnish if you're...

    You could use clear nail varnish if you're worried about the Liquid Metal shorting components, it won't be able to do much against the solder touching the LM though. You could just simply solder...
  15. Replies
    41
    Views
    3,936

    If upgrading from a previous card then you might...

    If upgrading from a previous card then you might have that driver still installed. Run DDU (display driver uninstaller) in safe mode, restart the PC, install nvidia driver, restart PC, then run a...
  16. Replies
    5
    Views
    1,003

    The MemOK button will retrain the RAM and...

    The MemOK button will retrain the RAM and potentially acquire a better overclock by using more stable tertiary timings for the RAM.
  17. Replies
    5
    Views
    1,003

    Have you tried clicking the MemOK button?

    Have you tried clicking the MemOK button?
  18. It could be the IMC on the chip too which simply...

    It could be the IMC on the chip too which simply can't handle those speeds.

    I've got 3600CL15 RAM and got it running at 3600CL15 by selecting the 4000MHz profile in the BIOS and then adjusting the...
  19. At least you got it sorted. :)

    At least you got it sorted. :)
  20. My 7900X is at 4.8GHz with no WiFI issues. Have...

    My 7900X is at 4.8GHz with no WiFI issues. Have you adjusted the base clock (BCLK) as it's unlikely but it might cause some issues with networking and USB etc.

    I did have an issue with the WiFi...
  21. Replies
    4
    Views
    1,569

    It took so long to boot for Kyle he had to edit...

    It took so long to boot for Kyle he had to edit it in his video
    https://youtu.be/8IfwKdP7b1w?t=9m40s
  22. Replies
    15
    Views
    37,394

    Not looked into it means not heard anything...

    Not looked into it means not heard anything beyond what was mentioned, never mind tried it.
    I thought my BIOS was in my spec but it wasn't. I changed that.
  23. Replies
    15
    Views
    37,394

    The only time I use the LiveDash is when the PC...

    The only time I use the LiveDash is when the PC freezes on boot and I need to know the Q-code. My never has never frozen on boot so...

    I believe you can assign animated .gif files to it somehow...
  24. Did G-Skill have a sale on or this just one huge...

    Did G-Skill have a sale on or this just one huge coincidence?

    https://rog.asus.com/forum/showthread.php?100445-Rampage-VI-Extreme-Unable-to-Boot-when-XMP-is-on-(G-Skill-4133)
  25. Replies
    10
    Views
    2,368

    With an 18 core chip the limit will be the temps....

    With an 18 core chip the limit will be the temps. You can take the volts as high as you need but those temps will start to become unmanageable, around 1.3v or so.

    Then the VCCIO and SA and CPU...
Results 1 to 25 of 71
Page 1 of 3 1 2 3