Search:

Type: Posts; User: Arne Saknussemm

Page 1 of 20 1 2 3 4

Search: Search took 0.12 seconds; generated 127088 minute(s) ago.

  1. tRC Yep need more volts for that....but this...

    tRC

    Yep need more volts for that....but this you have to find for yourself...especially combining kits...I'm just giving ball-park figures...a place to start if you will.

    At 3600 I found 1.1...
  2. For 3600 you should be good at 1.1 IO and...

    For 3600 you should be good at 1.1 IO and SA....maybe a touch more

    Try 14-14-14-28-42....trfc 252.....Something like that...but that will need more DRAM voltage...at least in my experience...
    ...
  3. If you tighten sub timings you can need more...

    If you tighten sub timings you can need more voltage...1.45 is fine if you tighten primaries more...

    3600 C14 can be around 1.5..1.6 mark

    3600 16 16 16 32 48....tRFC 288/240 should work 1.35 to...
  4. Yep...same cable you would plug to a GPU :)

    Yep...same cable you would plug to a GPU :)
  5. It's a 6 pin PCIe cable...i.e. 6 pin GPU connector

    It's a 6 pin PCIe cable...i.e. 6 pin GPU connector
  6. Aggressive timings will of course make things...

    Aggressive timings will of course make things harder...but a lot of that is trial and error...

    You might find 3600 tight timings beats 4000+ with the timing compromises and voltages

    3600 should...
  7. Combining kits can already give you these...

    Combining kits can already give you these problems....pushing over 4000MHz may add more

    I'd try one kit and see what you get...both kits may run 4000 with 1.3 IO SA...maybe only 3600
  8. Maybe download a fresh file of latest BIOS and...

    Maybe download a fresh file of latest BIOS and reflash that
  9. There is in fact USB BIOS flashback...so just use...

    There is in fact USB BIOS flashback...so just use that

    Maybe reflash latest BIOS with this method since it works fine on all impacts I've tried....
  10. 02 means it's sitting in BIOS I think...check...

    02 means it's sitting in BIOS I think...check your display chain...gpu... cable... monitor

    Maybe flash latest BIOS ....BIOS flashback method
  11. Yes...that should be fine

    Yes...that should be fine
  12. Yes that works....just select PCIe raid mode for...

    Yes that works....just select PCIe raid mode for the x16 slot you mount the card in....it says raid mode but they will work as 4 separate drives....

    With the obvious caveat that it depends on...
  13. Check the way the board is mounted...contact...

    Check the way the board is mounted...contact etc...and if you have a spare PSU check that...check the correct power cables are connected
  14. That should be OK. It really depends on you...

    That should be OK. It really depends on you finding the maximum airflow through your case.

    Good fans on an AIO are a must but both your choices come with good fans so...

    Just balance intake...
  15. https://rog.asus.com/forum/showthread.php?57038-Do...

    https://rog.asus.com/forum/showthread.php?57038-Don%92t-combine-memory-kits!-The-meat-and-potatoes-overview
  16. Probably the PSU if board and CPU are fine...or...

    Probably the PSU if board and CPU are fine...or the connections from the PSU
  17. Replies
    2
    Views
    626

    If the board supports it "BIOS Flashback" method...

    If the board supports it "BIOS Flashback" method is the most reliable ....followed by EZ Flash utility in BIOS
  18. Have tested this thoroughly with various CPUs and...

    Have tested this thoroughly with various CPUs and boards already....works great

    New AMD chipset drivers out too...

    All fine for my testing
  19. I haven't got around to this yet...too busy...but...

    I haven't got around to this yet...too busy...but you might look into VF offset curve.....looks like that might be the way to do it...?
  20. Crosshair VIII is a good board...the revision...

    Crosshair VIII is a good board...the revision coming for 5xxx series CPUs looks to be a very nice board,,,finally ASUS putting in the effort on AMD
  21. Nice one....they are workhorse GPUs when nothing...

    Nice one....they are workhorse GPUs when nothing fancy is needed :)
  22. No...i'm just suggesting a range of voltages to...

    No...i'm just suggesting a range of voltages to try...manual
  23. Connect the pump header to AIO header... ...

    Connect the pump header to AIO header...

    Connect fans to CPU header...or set CPU header to ignore monitoring if you are powering fans by some other means
  24. Replies
    597
    Views
    98,038

    One is WIFI version...one isn't....?

    One is WIFI version...one isn't....?
  25. Replies
    2
    Views
    240

    Yes....40 is wake from S4 sleep...BSOD from this...

    Yes....40 is wake from S4 sleep...BSOD from this might be unstable RAM

    Either way Windows might have re-activated fast startup in windows power menus
Results 1 to 25 of 499
Page 1 of 20 1 2 3 4