Search:

Please remember that manual tuning of VSOC can be required depending on the strength of the memory controller. Most samples will operate within the range of 1.00 to 1.15v.

The nature of updating firmware really lends itself to integral tools like EZ Flash and USB Flashback. There's no need to use AI Suite for this function, nor would I recommend it.

Hello,

Those values are ok for this platform and are as such to accommodate CPU with weak memory controllers. If you wish to tune these values to the capability of your CPU, you can do so.

Please do not post GPU related discussion in general. There is a clear section for NVIDIA GPU discussion available.

Please try the method posted above.

Have you tried since I posted the above?

Please use the following.

1. Go to Settings & Functions then Edit Profile

86148

2. Click on Edit Avatar

86149

Please submit a bug report in the Armory Crate thread.

Most likely a device that is connected to the system is causing the issue. Try sending the system to sleep whilst removing one device at a time until the issue desists.

Hello,

Did you attempt to use a profile from the previous build when this occurred?

What method did you use to flash 2206?*

Yes, use FB to flash to the latest UEFI and report back. You may want to try removing the CPU and cooler and reseating it, too.

Hello, please report this in the Armory Crate Support thread using the template in the OP.


https://rog.asus.com/forum/forumdisplay.php?311

Hi,

No, this seems like a permissions issue.

Hello,

Which part of the statement is confusing?

XMP I is the validated board profile that you will have seen on past generations. Every time a board is validated, this profile is the one used...

If you find it boring, feel free to present some evidence to the contrary as I mentioned to you in the other thread :)

See the latter part of my above post, increasing VDIMM is a remedy for...

Hello,

By looking too hard at VDIMM readings you are leading yourself up the garden path. If you need to apply more voltage for stability, than by all means apply it. However, the amount of...

X99 is an old platform, you'd need to check the QVL and then cross-reference that with kits you can find in stock for best chance of compatibility with your CPU....

Hello,

Remove the CPU cooler and CPU. Check for bent pins within the socket, then reattach the CPU and cooler whilst checking for even mounting pressure.

Also check that stand the motherboard...

Hello, capacity depends very much on your workload.

32GB is ample for a gaming system / 64GB for a capable work station.

Look for a singular kit of either capacity binned for 3200MHz that is...

Hello, are you measuring this from the socket? Please see my previous post. There isnt an issue with VDIMM, but if wanting to present some conclusive data, you would need to use a scope with an...

Hi,

Are you able to try again now, please?

Hello,

Testing previous settings on my personal rig show no noticeable reduction in memory stability between build 1201 and 2103. 4x8GB F4-4266C17-8GTZR @ 3733 C14.

Memory subsets all in auto...

Hello,

If using Adaptive Vcore, it's common that more voltage is needed over a fixed/manual voltage due to the change in load transitioning. It is also preferable to increase Vcore if...

Hello, topic covered here:

https://rog.asus.com/forum/showthread.php?106270-XMP-1-and-XMP-2-difference

Unless using Per CCX, as mentioned above auto values with PBO enabled is the best alternative. Like with any CPU your mileage varies depending on sample.

Mine is 44/44/43/43 @ 1.33v. Of course,...