Search:

So have you tried booting with each module one at a time in one slot, and then each module one at a time in a different slot like Snakeyes mentioned? This is really something that needs to be...

It is needed. You can set it (GPU Tweak) to auto start with your PC and load the profile or, you can launch it and apply the OC profile when you're going to start gaming or whatever workload you are...

Lower voltages are always better. I would ask how much over 1.35v? I don't see your exact memory module part number listed in your sig or specs, but typically 1.35v is the rated voltage for Vengeance...

Ditto... in no rush to update from 1401

Check out this thread. One of the participants has links to some guides focused on adaptive overclock.
https://rog.asus.com/forum/showthread.php?102459-I-need-help-with-Adaptive-Offset-voltage
...

Take a look here ... worth looking at your ratio; Auto vs All Cores

https://rog.asus.com/forum/showthread.php?103419-Asus-Maximus-X-Apex-New-Bios-will-not-allow-MCE-(Turbo)-on-stock-8700k

Hi, I think your English is fine and that you provided excellent information regarding your setup/configuration and asked good questions. I personally tend to have better luck using manual vs....

@stewart



That smirk... are you implying GPU Tweak may soon have an OSD?

Yes, in your setup use one of the CHA_Fan headers. I did the same in my R6. I have three roof fans mounted for top exhaust and I plug those into the builtin fan_hub using the PWM (4pin) connectors...

What happens if you install and Run GPU Tweak II and then enable OC mode and apply , then run GPU-Z ? The speeds listed in the specs are the OC speeds not the default. You need to enable the OC mode...

:cool: Very Cool! I am glad you got it sorted out.

If you click "Sensors" in HWiNFO you will see much more of what you're looking for.

Well... getting it to behave different is something.

I know you don't want to hear this but - Clean install...

Oh and upgrade your CPU-Z to the latest... you're running an older version - not that it will affect your settings but ...

I attached some examples from CPU-Z and one from HWInfo to give you an...

Yup and I was albe to read...
SO after the reveal that you cloned OS this may take longer to triage than it would to install fresh - But there are a few more things to try and see if its still...

Yes it is. What you want to look for are the Targeted settings on the left in Yellow and also by stepping through the config and check that all the values you entered before rebooting still exist....

The bios file I could not read it was the .cmo needed the .txt version but no worries on that. I was just looking to see if it actually saved the settings after rebooting. You can check that easy...

I am assuming your OS is Windows 10 64bit?
Are you using the power-saving plan in Windows?
Can you post screen shots from CPU-Z, the CPU & Mainboard tabs?

Do you have HWInfo64 or another utility...

The performance stats for your device are as good if not better than those for my 960 Pro. It's actually nice to see that the 970EVO has improved and is better priced. As far as the "Advertised" R/W...

Updated my X Hero WiFi to 1401 no issues. Reapplied OC and just finished 3 hour run of prime.
I did pre and post update runs of CB and others too. All post update scores the are same or better for...

NICE!
You knew that was a good score... I'm looking at HWbot Cinebench - R15 xCPU Ranking

@Steve0

I'm thinking that the EZ tuning is not sticking or some auto-calculated settings are not compatible with your particular system. You mentioned that you are not a hardcore over-clocker but,...

It is easy for me to sit here and "spend" your money but, I would recommend the extra $60.00 and go for the Crosshair VII.
Yes, your chosen CPU will work fine on the C6E after first flashing the...

No mention of anything specifically so, I'll add my experiences at the risk of being overboard or out of context completely...
AISuite 3, is working for me on:

Maximus X Hero WiFi, bios 1401 ...

All the components together will make up the "noises" that are heard. Sounds are bouncing around inside of cases like bullets inside a steel drum, making it difficult to actually isolate the source...

You might try connection the AIO pump to the AIO pump header (Pump at full speed all the time is fine) and then the two fans to CPU and CPU_opt. and then use Qfan control in the BIOS and set the RPM...