Search:

Type: Posts; User: BigJohnny

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    3
    Views
    71

    They wont touch it unless you send it back as it...

    They wont touch it unless you send it back as it came from the factory. Spinners they have been using are less than desirable. All mine are SSD even the ones that came with spinners.

    First thing I...
  2. The array should stay intact. You will just have...

    The array should stay intact. You will just have to enable the BIOS settings for the drives to be raid capable. I've been through several builds with raid arrays and never lost any of them. Just...
  3. Replies
    1
    Views
    25

    I bought the first one and retuned in in less...

    I bought the first one and retuned in in less than 24 hours. Just didnt live up to the hype.
  4. Installation is one thing, getting it to work as...

    Installation is one thing, getting it to work as it should is another story.
    Personally I dont use it. All my RGB is corsair that has a plugin for ASUS MOBOs with the only restricition being it...
  5. Replies
    5
    Views
    142

    Best Advice I can offer is to wait little bit as...

    Best Advice I can offer is to wait little bit as new things are around the corner and buy everything at once. Nothing sucks worse than having a MOBO thats outdated before a newer CPU comes out. Bank...
  6. You talking about the EZ plug thats a molex at...

    You talking about the EZ plug thats a molex at the bottom? I plug that in too. Its not for the GPUs but everything else on the PCIE slots that draw their power directly from the PCIE. I have two...
  7. Did you reboot the router after setting it to...

    Did you reboot the router after setting it to manual and make the channel change?
  8. Clear your cache.

    Clear your cache.
  9. I dont have that model but can tell you my...

    I dont have that model but can tell you my battery wont support full performance gaming, G752VY. I have to have the brick plugged in and it still takes power from the battery.
    With a brand new...
  10. Thread: LCD broken

    by BigJohnny
    Replies
    3
    Views
    127

    I dontr think its as simple as replacing it with...

    I dontr think its as simple as replacing it with a higher refresh rate panel. All the hardware that drives it is located on the MOBO.
  11. The last several Ive bought were in a non sealed...

    The last several Ive bought were in a non sealed box and no static bag. Everything was there, protective film in place.
    I registered the warranty and called it a day. Been that way on the last 3 Ive...
  12. Replies
    2
    Views
    75

    Must be the Flux capacitor breaking down. ...

    Must be the Flux capacitor breaking down.

    https://www.oreillyauto.com/flux-500.html
  13. Replies
    3
    Views
    128

    Fast boot actually can reload problems. I leaver...

    Fast boot actually can reload problems. I leaver mine disabled.
    Detect HDD can be an instability issue. I know If I push my ram timings to tight or OC too high Ill get either Detect HDD or load GPU...
  14. FWIW always install the chipset drivers before...

    FWIW always install the chipset drivers before you install anything else. Install OS, Install Chipset, Install MEI then have at it with the rest.
  15. The VID tables are too high to leave anything in...

    The VID tables are too high to leave anything in auto since 10 series came out.
  16. Replies
    1
    Views
    197

    Ive been running win !! so far with little to no...

    Ive been running win !! so far with little to no issues. The last one they released in the DEV channel fubared my Ique so I rolled that one back. Other than that been working great.
  17. I use all of mine. It wont stop power draw but...

    I use all of mine. It wont stop power draw but overload those connected if you don't run what you need being all of them especially on a 64 core.
  18. Ive been working with the dev channel and keeping...

    Ive been working with the dev channel and keeping tabs on development. Im fairly certain all the reg hacks to get it to run on old gear have been disabled.

    Your link is dead.
  19. Replies
    3
    Views
    563

    You will have to find the BIOS file first. Then...

    You will have to find the BIOS file first. Then you can run the BIOS flash tool from the CMD prompt with admin privileges adding /nodate to the cmd line.
  20. What I usually do is set it to XMP and see where...

    What I usually do is set it to XMP and see where it goes and record all the numbers including tertiary timings. Then go back and do it manually changing one thing at a time. Yes it tedious but gets...
  21. Replies
    4
    Views
    154

    Im not seeing what you are using to cool with....

    Im not seeing what you are using to cool with. That makes a HUGE difference. If its air, you wont get far, if its AIO you will get a little more maybe. To squeeze everything it has to offer you need...
  22. Its been Beta (what they call beta is really...

    Its been Beta (what they call beta is really alpha) since its inception. I tried every version for a long time and eventually said screw it. Its bad enough that it has never worked correctly then to...
  23. I got fed up with multiple onboard sound devices...

    I got fed up with multiple onboard sound devices on multiple boards. I use TosLink optical out into a DAC then into an amp.....perfection.

    Adding insult to injury is the software.
  24. Not uncommon in a lot of keyboards. I have an old...

    Not uncommon in a lot of keyboards. I have an old POS USB that has nothing special in the least about it, logitech that I keep plugged in the sitting off to the side for when I need to get into BIOS....
  25. And this is why I don't run ASUS Software.......

    And this is why I don't run ASUS Software.......
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4