Search:

Type: Posts; User: Silent Scone@ROG

Page 2 of 20 1 2 3 4 5

Search: Search took 0.02 seconds; generated 52747 minute(s) ago.

  1. Hello, please post in the existing thread.

    Hello, please post in the existing thread.
  2. Replies
    4
    Views
    199

    Hello, You don't seem to have specified which...

    Hello,

    You don't seem to have specified which GPU you were using. Have you tested it independently from the system?
  3. Wake from sleep issues when overclocking is...

    Wake from sleep issues when overclocking is normally related to the VCCSA and VCCIO rails, yes. If the issue continues, consider relaxing tRFC and tREF
  4. Replies
    12
    Views
    2,278

    Have you tried using the G2 with the system at...

    Have you tried using the G2 with the system at bone stock? This includes no memory overclocking, adjustment of FCLK/FCLK Enhancer or PBO. Instability of the infinity fabric can cause this kind of...
  5. Hello, Mixing memory kits is ill-advised for...

    Hello,

    Mixing memory kits is ill-advised for plug and play. Please have a read below. The post is universally applicable to all DDR4 platforms. Memory kits are sold in the density they are sold...
  6. Hello, 1. Go to settings & Functions > Edit...

    Hello,


    1. Go to settings & Functions > Edit Profile
    2. Click on Edit Avatar
    3. You'll be redirected to the ASUS site automatically Click on Edit
    4. Select an Avatar or Upload Picture.
  7. It can do if not seated correctly or there is...

    It can do if not seated correctly or there is socket damage, yes. Check the PCIE slot for any visible debris or damage, too.
  8. UEFI 2601 contains AGESA 1.1.0.0 Patch C. Boost...

    UEFI 2601 contains AGESA 1.1.0.0 Patch C. Boost behaviour between AGESA builds may vary.
  9. 3600MHz should be no problem for an 11th Gen CPU...

    3600MHz should be no problem for an 11th Gen CPU on that board. As with all things overclocking related, however, plug and play compatibility may vary depending on the CPU sample, memory vendor and...
  10. Hello, if the problem occurred after moving the...

    Hello, if the problem occurred after moving the system you can try reseating the CPU and cooler, making sure there is even mounting pressure.
  11. Replies
    10
    Views
    736

    This process is part of Microsoft's Drive...

    This process is part of Microsoft's Drive Framework and might not be the route course of the issue. Visit the Intel Download Center and download the latest chipset drivers for your board...
  12. Replies
    10
    Views
    736

    Check out latencymon as suggested. It may point...

    Check out latencymon as suggested. It may point you in the right direction. https://www.techspot.com/downloads/6944-latencymon.html
  13. Replies
    10
    Views
    736

    Hello, Update to the latest Nvidia Game Ready...

    Hello, Update to the latest Nvidia Game Ready drivers. You might want to try downloading and running latencymon to see if this flags any services running high DPC latency.
  14. If the issue only occurs when pushing memory and...

    If the issue only occurs when pushing memory and FCLK then the overclock is not stable. Tune VSOC value manually ranging from 1v to 1.15v.
  15. Hello, A number of items can have an impact on...

    Hello,
    A number of items can have an impact on the single threaded performance depending on the workload.

    BIOS and AGESA revision
    Memory latency
    Silicon quality
    Fabric Clock
    BIOS CPU...
  16. Hello, If the issue occurs when enabling the...

    Hello,

    If the issue occurs when enabling the XMP profile then the overclock is likely not stable.

    Enable XMP in the UEFI and try setting the below values to see if this helps the system pass...
  17. Replies
    7
    Views
    831

    Assigning the slots in the UEFI to GEN 3.0 that...

    Assigning the slots in the UEFI to GEN 3.0 that are populated is sufficient enough, yes.
  18. Hello, Have you tried creating a new profile...

    Hello,

    Have you tried creating a new profile on build 2006? If you're using a saved profile from an old UEFI build it's possible it's incompatible due to changes in AGESA or other rulings....
  19. Hello, Use NVFlash to revert back to V2 BIOS....

    Hello,

    Use NVFlash to revert back to V2 BIOS. You can download the correct BIOS from TPU if you did not save it. https://www.techpowerup.com/vgabios/

    Open an elevated command prompt as admin
    ...
  20. Hello, Memory stability should be tested with...

    Hello,

    Memory stability should be tested with HCI MemTest or Karhu RAM Test. OCCT Memory test is also fairly good.


    Go into the AMD Overclocking Menu in the UEFI, select Curve Optimiser and...
  21. Replies
    1
    Views
    320

    Hello, Close afterburner or any other...

    Hello,
    Close afterburner or any other application with an active OSD and try again.
  22. Replies
    570
    Views
    172,316

    See guide here...

    See guide here
  23. Replies
    10
    Views
    817

    The QVL and validation process is designed to...

    The QVL and validation process is designed to ensure the user the best possible chance of compatibility, or more importantly stability. It doesn't ensure or guarantee the kit will operate at the...
  24. Sticky: thread stickied

    thread stickied
  25. Are you using the IGPU? If not, it can be...

    Are you using the IGPU? If not, it can be disabled. Having it enabled whilst dormant will likely not have an adverse impact on performance, though.
Results 26 to 50 of 500
Page 2 of 20 1 2 3 4 5