Search:

Type: Posts; User: NemesisChild

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Try disabling (uncheck) fast srartup in the...

    Try disabling (uncheck) fast srartup in the Control Panel under Power Oprions.
  2. Try loosening the cold plate on your CPU cooler....

    Try loosening the cold plate on your CPU cooler. It can cause memory issues as you describe if it's too tight.

    Good luck!
  3. Replies
    5
    Views
    114

    Yes LLC 4 or 5 should suffice with higher...

    Yes LLC 4 or 5 should suffice with higher voltages.
  4. Replies
    5
    Views
    114

    Hello and welcome to the forum! First of all,...

    Hello and welcome to the forum!

    First of all, your "overclock" isn't really considered an overclock since the stock turbo frequency is 4.7GHz.

    Secondly, I don't think you meant 1.84v otherwise...
  5. In your system info listing, you state "dual...

    In your system info listing, you state "dual channel unknown" What do you mean?

    As mentioned above, clear the CMOS. If you don't know how to, google it or refer to your mobo manual.
  6. Yes completely safe, nice job!

    Yes completely safe, nice job!
  7. The sweet spot is 3200MHz with CL14 timings. ...

    The sweet spot is 3200MHz with CL14 timings.

    If you don't need 32GB, go with 2x8GB sticks. They are much easier to OC, even versus 2x16GB sticks.
  8. It's a luck of the draw. 3000@ CL 14 should be...

    It's a luck of the draw. 3000@ CL 14 should be doable.

    Up the DRAM voltage to 1.40v and if stable, back it down to a level where it remains stable.

    BTW, good luck with 1T. You will probably...
  9. It is not good practice to combine unmatched sets...

    It is not good practice to combine unmatched sets of memory, even if it's the same brand and model.

    When it comes to system stability and peace of mine, always use matched sets.
  10. IBT basically stresses the CPU and not much else....

    IBT basically stresses the CPU and not much else.

    RB is more realistic in that it stresses the entire system: CPU, graphic card, and memory.
  11. Since you manually set the frequency, did you...

    Since you manually set the frequency, did you also enter the base timings and DRAM voltage?

    If you're not familiar or comfortable doing this, then try enabling the XMP profile.
  12. Who told you that? Depends on the component...

    Who told you that? Depends on the component quality and PC usage. PSU performance degrades over time.

    5 years is pushing it for most units let alone 10 years.
  13. 750w PSU should be plenty for your system. How...

    750w PSU should be plenty for your system. How old is the unit?
  14. If could be a hardware issue with the board. If...

    If could be a hardware issue with the board. If you bought it before Christmas then it should still be under warranty.

    I suggest contacting ASUS tech support, they may have you return it for a RGA...
  15. Did you try uninstalling the adapter in device...

    Did you try uninstalling the adapter in device manager and then reboot?
  16. I think you mean bios 0805. Did this also...

    I think you mean bios 0805.

    Did this also happen on previous bios versions? You may need to wait for a new bios version/update to see if it corrects the issue.

    However, there have been other...
  17. Replies
    16
    Views
    569

    Vcore = CPU voltage

    Vcore = CPU voltage
  18. Replies
    16
    Views
    569

    I don't use CB, so I can't comment on your score....

    I don't use CB, so I can't comment on your score.

    However, 89c is pushing the thermal limit. You do not want to go about 91c.
  19. You may have a short somewhere but I'm leaning...

    You may have a short somewhere but I'm leaning towards a GPU failure since you are getting graphical corruption.

    Here's what I would do, disconnect everything including all drives and USB devices...
  20. Have you looked at any software like HWMonitor to...

    Have you looked at any software like HWMonitor to see what is reports for DRAM voltage?

    We have seen this happen on a few boards where no matter what DRAM voltage is set in the bios, the actual...
  21. Your DRAM voltage looks low at 1.20v. Isn't that...

    Your DRAM voltage looks low at 1.20v. Isn't that a 1.35v set?
  22. Load all bios settings at default (including your...

    Load all bios settings at default (including your memory) and test stability.
  23. Thread: Run sli

    by NemesisChild
    Replies
    2
    Views
    202

    Yes, they are the same GPU. Keep in mind that in...

    Yes, they are the same GPU. Keep in mind that in SLI, both cards will run at the slowest speed of the two at default clocks.

    You can always overclock the non OC card to match the OC edition, but...
  24. Do you mean it happens after being unplugged from...

    Do you mean it happens after being unplugged from the wall?

    This is normal behavior whenever power is disconnected from the motherboard.
  25. Replies
    18
    Views
    1,038

    I can overclock my 3600 CL16 kit to 4000 just by...

    I can overclock my 3600 CL16 kit to 4000 just by raising the DRAM voltage. No other timing adjustments needed.

    And btw, it's a RGB set.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4