Search:

Type: Posts; User: wvlucas

Search: Search took 0.00 seconds.

  1. RVE BIOS 2001 does not reconize second SATA CD/DVD ROM drive (anymore)

    Had this system up and running for about a year and half. All was well until updated BIOS to 3301 last week. Problem was system continued to reboot without user intervention. Decided to downgrade to...
  2. Apparently, what had happened was that when I ran...

    Apparently, what had happened was that when I ran the MEI driver installation that was downloaded from the ASUS support site, the system did not like that and chocked, forcing the BIOS to become...
  3. I removed all of the USB devices and attempted to...

    I removed all of the USB devices and attempted to boot to BIOS, but that attempt had failed as well. I then disconnected the SATA Blu-ray drives and was able to get the system to boot to BIOS (once)....
  4. What I am seeing when the system attempts to boot...

    What I am seeing when the system attempts to boot then stalls, is QCODE "A2", IDE Detected. I have tried starting the system by pulling all of the SATA connected drives and attempted another boot,...
  5. Yes, that is correct. The MEI driver was...

    Yes, that is correct. The MEI driver was downloaded from the ASUS R5E support page under Windows 10 64bit.

    Now what I am experiencing is the system will no longer boot to an OS. It will boot and...
  6. "Warning: Ensure to install mei driver before using asus 5-way optimization" appears

    This alert has been probably posted more times that anyone would expect, but I have searched and have not found a solution to resolving the alert when the system loads Windows.

    To resolve satisfy...
  7. Replies
    5
    Views
    2,564

    Chino, when the system halts, the DEBUG LED...

    Chino, when the system halts, the DEBUG LED displays "A2" (IDE Detected).

    About the 24 pin power connector, the only LED observed during and after system powers up is only the GREEN LED and it...
  8. Replies
    5
    Views
    2,564

    Cannot boot pass splash screen

    System will not boot pass splash screen. Several attempts were made to boot to the OS. When booting the system, the process stalls on the ROG splash screen with the lower option press DEL or F2 to...
  9. Replies
    54
    Views
    49,065

    Sticky: How to setup a RAID 0 with two Intel 750 series...

    How to setup a RAID 0 with two Intel 750 series 400Gb PCIe SSD drives. I understand it is posible with one M.2 and one PCIe, but not both PCIe supported SSDs. Is this correct?
  10. Amazon got it, but they are out of stock, but...

    Amazon got it, but they are out of stock, but usually can get it quickly shipped when they do get it.
  11. Replies
    21
    Views
    6,659

    This may or may not apply, but years ago, this...

    This may or may not apply, but years ago, this simular issue occurred to me. After days and days of hammering this issue, I was about ready to toss the dumb thing out the window, but something made...
  12. Yes, that is the location that the speaker was...

    Yes, that is the location that the speaker was plugged into. It is in conjunction with other components leds, such as, HDD LED, PLED, PWRSW and the famous reset switch. The speaker connects to the...
  13. Issue resolved. BIOS/CSM corrected. OS boots as...

    Issue resolved. BIOS/CSM corrected. OS boots as expected.
  14. Yes, it is inserted in the correct location. It...

    Yes, it is inserted in the correct location. It is part of a junction plug that supports other components.
  15. Got both of those, neither is working. No beeps,...

    Got both of those, neither is working. No beeps, no buzzes, no nuttin. But thanks anyway
  16. Have done so, but yet, not beeps. Thanks anyway

    Have done so, but yet, not beeps. Thanks anyway
  17. How does one enable the motherboard buzz speaker?

    Only for boot up would I care for the little buzz speaker instead of watching the LEDs and digital readouts. How I have the system setup, it is easier to listen for the beeps instead of watching the...
  18. The list of boot devices does not contain the SSD...

    The list of boot devices does not contain the SSD that the OS is installed. In order to boot the system to Windows is to go into the boot list from the lower left corner of the BIOS and select which...
  19. UPDATE: System Config Product Information...

    UPDATE:
    System Config

    Product Information Fill form directly / Select from My Registered Products
    Product Type: Motherboard
    Product Model: Rampage V Extreme/U3.1

    Motherboard...
  20. System boots to BIOS okay, but will not boot to Windows

    Problem Solved:
    Solution - Configured CSM correctly, set default boot drive.

    Issue:
    Windows will not boot

    Observation:
    System powers up, goes into BIOS

    Expectations:
Results 1 to 20 of 22